Question about 2005 Mercury Grand Marquis

2 Answers

If i change a lighting control module on a 2005 mercury grand marquis does it have to be programmed

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Mercury Expert
  • 93 Answers

You don't have to change it yourself. Ford will do it for free although I have never seen them advertise that fact. If you have a 1999-2011 Mercury Marquis, Mercury Marauder, or Crown Victoria, and your headlights and or tail lights don't work, Ford just finally EXTENDED THE WARRANTY on your LCM (Lighting Control Module) for free - both parts and labor and will install a new one for free! This is not a recall. Ford has extended the warranty to 15 years/250,000 miles. It must be done at a Ford Dealer and the fix is free. Call your local ford Dealer and tell them you need to make an appointment because your headlights don't work and Ford has extended your warranty on the LCM. Tell them it is the Customer Satisfaction Program 14N01. Have your Vin number ready as they will ask for it. You don't have to be the original owner. If they act like they don't know what you are talking about ask to talk to the manager or tell them to call Ford Motor Company and ask them, or you can call Ford yourself. We had ours done at a Ford dealer in August of 2014 in Scottsdale, AZ. It is a 15 year warranty and if you have a 1999, the deadline might have passed, but call them and ask them to see if it has. Maybe it hasn't."

Repeat: You don't have to be the original owner.

Posted on Feb 12, 2016

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Your lcm is a standalone unit does not require programing.

Posted on Nov 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 mercury grand marquis driver air bag circut open after replacing airbag,clock spring,and control module


You need to have the system checked for what the fault code is...are you sure it's the drivers side air bag or the drivers side, side air bag(located in the seat back?)They're could be a problem with the wiring under the seat.

May 12, 2014 | 2005 Mercury Grand Marquis

2 Answers

What is the average price of a new lighting control module for a 2005 mercury marquis, what brand and where is the best place to purchase it.


I buy all my parts from www.1aauto.com

They are located in the US and have a BBB rating of A+.

They will have you module in stock and they are 80% cheaper then dealers.

Enjoy, please provide feedback.

Mar 18, 2011 | 2005 Mercury Grand Marquis

2 Answers

Want to replace LCM 2005 Mercury Grand Marquis


The Lighting Control Module can only be replaced by the dealer or by someone who has the factory scan tool. The new module has a blank memory in it. The tech needs to upload the memory from the old module, then donload it into the new module.
Sorry to burst your bubble.

Mar 11, 2011 | 2005 Mercury Grand Marquis

2 Answers

The lighting control module in my 2005 grand marquis failed. How do one replace it?


just unscrew the srews unplug,plug in new one and screw back on no programming required

Jul 28, 2010 | 2005 Mercury Grand Marquis

1 Answer

Where is the headlight control module on 2005 grand marquis located


your lcm is located under the steering wheel to your right its that rectangle box with a connector showing.

Jun 17, 2010 | 2005 Mercury Grand Marquis

3 Answers

How do I change out the Headlight/ Lighting Control Module on my 2005 Mercury Grand Marquis


u can do it your self the lcm is a stand alone unit just unscrew dissconnect and reconnect and screw

Mar 22, 2010 | 2005 Mercury Grand Marquis

1 Answer

Lights on 2000 Mercury Grand marquis will suddenly go out while


please rate as solved if this fixes your issue. Let me know too.

I believe you have a bad LCM, Lighting Control Module. Or, the connectors to it have corrosion maybe. The module is above the brake pedal. It is very expensive. You can buy one at discount from tascafordparts.com. Sometimes, ebay has one too. But, you need one for your year car. Match the part number on your LCM.

Here's how to get it out.

SECTION 419-10: Multifunction Electronic Control Modules 2000 Crown Victoria/Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Module —Lighting Control (LCM) Removal
  1. sya~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Prior to removal of module, it is necessary to upload module configuration information to a scan tool. This information needs to be downloaded into the new module once installed. For additional information; refer to Section 418-01 . (I replaced one without doing any programming, so I don't think this applies).

  1. sya~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
    Disconnect the battery ground cable.
  1. Remove the LH instrument panel lower insulator.
    1. Remove the pin-type retainers.
    1. Disconnect the courtesy lamp.
    1. Remove the LH instrument panel insulator.
  1. Position the LCM aside.
    1. Remove the screws.
    1. Release the locking tab.
    1. Position the LCM aside.
  1. Remove the LCM.
    1. Disconnect the electrical connectors.
    1. Remove the LCM.

9a18f6a.gif

Jun 03, 2009 | 2000 Mercury Grand Marquis

Not finding what you are looking for?
2005 Mercury Grand Marquis Logo

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...