Question about Lexus GS 300
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check the wiring harness beside the hinge that moves when you close the trunk.i have seen the wiring get pinched and the ground gets broken. the tail lights have separate left and right side fuses.get a test light,and with the ignition in the on position,there should be power on both sides of all the fuses.the atc type have little test pins on them.ground the test light and put the tip on the fuse.if there is power,the light will come on. if a fuse does not light up the light on both sides,it is open.since the fuses are see thru,it is apparent if it is blown as the metal inside will be burnt.
Posted on Oct 23, 2009
P0715 Input/Turbine Speed Sensor Circuit Malfunction
It seems that you may have a problem with your sensor on or in your transmission.
Posted on Jun 03, 2010
You need a new Spark Plugs Spark Plug Wrench Socket wrench Extension (At least 2-3 inch) size 10 socket size 12 socket...
First thing you need to do is find out where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts honding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. THey might be a little tight and hard to get out so you're going to need to give it a good tug. Once you pull them out MAKE SURE YOU DONT DROP ANYTHING INTO THE CYLINDERS. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Just simply unscrew the plugs, pull them all out, and then put the next ones in, and tighten them down. Just connect all the sensors, and put the cover back on and you're done. Pretty simple.
Posted on Jul 23, 2010
Tips for a great answer:
May 30, 2017 | Lexus Cars & Trucks
Jan 08, 2016 | Lexus Cars & Trucks
Jun 02, 2014 | 1998 Lexus Gs 400
Oct 02, 2012 | 1994 Lexus GS 300
Jun 07, 2012 | Lexus GS 300 Cars & Trucks
Oct 06, 2011 | 2001 Lexus Gs 300
Jan 20, 2011 | 1994 Lexus GS 300
Nov 26, 2010 | Lexus GS 300 Cars & Trucks
Aug 15, 2010 | 2001 Lexus Gs 300
913 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: