Question about Chevrolet Suburban 1500

1 Answer

All foward gears went out of my 2oo1 surb.I did still have reverse.found trans out of 98 tahoe.swapped bell,tail,and used my torque out of the 01.put in,truck wont move.any advice.need to save all I can.Ive checked all ele conn.even changed all solionids and harness in trans,and still wont go in any gear

Posted by on

  • 1 more comment 
  • bigshow8 Oct 03, 2010

    the torque had a little oil in it,but did not fill.what can I do?

  • bigshow8 Oct 04, 2010

    did not fill.had a little oil in it.what can I do?

  • bigshow8 Oct 04, 2010

    found problem.slight diffrence with input shaft.trans out of the tahoe will not work without changing input shaft.theres also a diffrence in the torque.thanks eyecue.might ask for your help again,

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 15,691 Answers

You could have made a small problem bigger. When you change the torque converter, you have to fill it first. You then need to replace the seals that are on the shaft. The first tranny had a bad clutch pack.

Posted on Oct 03, 2010

  • Brad Brown Oct 04, 2010

    The first thing that you need to do is drop the tranny again and then I would have it tested. You need to then replace the seals that are on the shaft that the torque converter sits on, Lay the torque converter down and fill it with ATF and then reinstall it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2004 Tahoe. When I put it in reverse it make a loud consistent grinding noise and doesn't go anywhere. But when I put it in drive, it engages. The speedometer shows that I am going up to 50 mph...


Not sure what your looking for in an answer here. If you are capable pull it out and check it out. If you are not capable take it to a shop for repair or replacement. I fear there is no easy fix for a transmission going bad. Since you say there is a bad grinding noise, it wont be a simple wire loose or vacuum line etc.

Mar 30, 2015 | 2004 Chevrolet Tahoe

1 Answer

Driving a 2003 Ford windstar. Went to pass and


Very common on this make and model trans, pump drive splines inside torque converter strip out and pump is not turning, Most times there is no damage to pump shaft. Remove trans and remove torque converter, inspect the splines at the very bottom of the hub hole. If stripped out inspected pump shaft splines which are the smaller center splines coming out of trans, if ok replace torque converter and re-install trans, change out fluid, clean any metal from magnet and replace filter, fill with fluid and verify proper operation.

Mar 01, 2010 | 2003 Ford Windstar

1 Answer

98 tahoe does not move?


get a good used trans from junkyard a swap yourself is the only cheap fix for something like that

Feb 14, 2010 | 1998 Chevrolet Tahoe

1 Answer

4L-60E trans interchange


Sorry it will not work, the internals are the same but the transmission housing has changed. The key distinction of the Later 4L60-E (1997-2006) from the Early 4L60-E (1992-1997) or 4L60 (1990-1992) or 700R4 (1982-1989) is the six-bolt "hex" rear output or tail-housing / adapter pattern. The previous versions featured a four-bolt square bolt pattern at the adapter or tail-housing. Additionally, the removable bell-housing is also another distinguishing feature.

Two-wheel-drive versions have tail-housings and typically a longer output shafts than four-wheel-drive versions, which have various adapter assemblies and a shorter output shaft.


Jan 12, 2010 | 2002 Chevrolet Tahoe

1 Answer

Have a 94 New Yorker when I put it in reverse I get a red R on the PRNDL and don't have reverse all other gears are green and work. What might be causing this?


the reverse clutch in the trans is after failing.there are two clutch packs in trans for reverse,low/reverse and reverse clutch in overdrive unit,so where you have all foward gears the low/ reverse is ok the reverse clutch in od unit is most likely culpret

Aug 08, 2009 | 1994 Chrysler New Yorker

2 Answers

Car starts up shifts in all gears but wont move foward or reverse


The ring gear lined up with the torque converter,and is the trany full of fluid?

Jun 27, 2009 | 2000 Ford Explorer

1 Answer

Changing from 98 2.5 man.tranny,to 01 3.9


WOW. You want to put a 3.9 ltr V6 from a 2001 Dakota into a 1998 Dakota with a 2.5 ltr 4 cylinder? And you want to keep the manual trans? Have you considered what you will be using for a fuel and engine managment system? If you have a wrecked truck as a host vehicle then the changover may work. But it will take patience and a lot of work. I don't think the 4 cylinder trans will bolt up but I am not sure - never tried that. However that light duty trans will probably not handle the torque for very long even if it did bolt up. Your local Auto Salvage Yard will have a changeover guide and be able to tell you if that trans will fit either engine. My recommendation is to swap everthing and change that 98 to a 01, auto trans and everything.
Good Luck
Let me know how it goes?

Mar 08, 2009 | 1995 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...