Question about Plymouth Acclaim

Open Question

How do I change the front crank seal 1993 acclaim 4 cylinder. can it be done external like a press in seal

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 1993 Dodge Stealth Oil leak 3.0 SOHC

there are seals behind the timing cover.when they leak oil drips down and 93 base model leaks oil and coolant from this same place.

Posted on Jun 08, 2009

  • 1 Answer

SOURCE: 1991 Acclaim: what is the spark plug gap for 91 acclaim 2.5 4 cy...


Posted on Jul 17, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The timing belt on our 1993 Plymouth Acclaim just broke. Do we need to replace the water pump and the valves when we replace the timing belt? The guy at the garage says the valves are full of gunk!!

well this is what you have to do send the cylinder head to a machine shop for any internal damage check any bend valve install a new water pump new timing belt and problem solve

Jul 13, 2012 | 1993 Plymouth Acclaim

1 Answer

Timing belt broke on 2.5 liter Acclaim. Replacing, but, where are the alignment marks? Thanks!

# 1 cylinder at TDC. Crank sprocket and intermediate shaft mark align, crank at top, intermediate at bottom. Camshaft hole at 12 oclockmotor1258_34.jpgmotor1258_33.jpg

Sep 20, 2011 | 1994 Plymouth Acclaim

2 Answers

Cranks but wont start

you need to check for spark at the plugs while cranking.then check for fuel entering the intake at the don`t say if its a 4 or 6 cylinder.if its a 4 cylinder you can look into the throttle body while someone cranks the motor and you should see fuel squirting into the intake.if you have no spark then check to make sure the cap and rotor is in good condition and the rotor is turning(if not then the timing belt maybe broken and needs replacing.also check the plugs as if they are worn so bad you won`t get any spark.a common problem on these is the coil pickup in the distributor going bad.there is a 2 wire connector that comes out of the distributor with a plug,if you follow this wire back into the distributor you will see the pickup.also check and see if you can hear the fuel pump running while cranking,you may have a bad fuel may have to remove the gas cap and listen at the filler neck or listen under the car were the gas tank is.if the fuel pump is not running then you can hit the fuel tank in the middle while someone cranks the motor and it might start.if so then the fuel pump is no good another common problem.there is a fuel pump relay under the hood on the drivers side that sometimes goes bad or there is bad connections.most of this checking is good for the 6 cylinder as well except you can see the fuel squirting into the could also be a bad computer that will have to be checked out at a shop.

Apr 10, 2011 | 1991 Plymouth Acclaim

1 Answer

PLEASE HELP I don't have to listen to my

sometimes it helps to tell what engine it has. It should be obvious when the engine is looked at where it is. If its a V6, its under the timing belt cover, and you need to replace the timing belt, tensioner pulley,and cam and crank seals while its apart.

Nov 19, 2010 | 1991 Plymouth Acclaim

1 Answer

I was given this: Try this site, good for that type of thing. It didn't work. I recieved an error indicating that this was an invalid site....

1990-93 Plymouth Acclaim Stereo Wiring Constant 12V+ Pink/Black Switched 12V+ Red/White Ground Black Illumination Orange Dimmer n/a Antenna Right Front Front Speakers 5 1/4" Doors

Aug 27, 2010 | 1993 Plymouth Acclaim

1 Answer

Were does this connector go???!!

You marked everything when you removed them.!!! Find another similar veh and check it out.

Mar 11, 2010 | 1990 Plymouth Acclaim

2 Answers

How do I change the fuel pump on my 93 plymouth acclaim, p.s its a 4 cylinder

You will have to drop the gas tank, the fuel pump is sold as a complete pump and module and they are in the tank.

Sep 24, 2009 | 1993 Plymouth Acclaim

1 Answer

Need to know where timing marks should be when in time on a 93plymouth acclaim 2.5

Twelve (12) degrees. But special procedures are required to set the timing. Refer to the emissions label that should be under the hood or a service manual before attempting to adjust the timing. Hope this helped and best wishes.

(That is if the car has the 2.5L TBI SOHC 4 cylinder engine.)

Aug 26, 2009 | 1993 Plymouth Acclaim

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides