Question about 1996 GMC Sonoma

1 Answer

My signail light will not flicker - 1996 GMC Sonoma

Posted by on

  • cheap repair Oct 03, 2010

    check for a burnt out light bulb, check all 4 corners of truck

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Usually sign of a bulb being out turn on the switch --on the side that does not flicker and go out and look in front and back to see which bulb is out.

If both sides do not work it is usually a relay. Autozone can get U one and tell you where it is exactly.

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All lights flicker on my 1998 mystic


I wonder if all the lights flicker?

Some headlight bulbs aren't held into the reflectors as securely as others and can appear to flicker due to vibration, bumps and so forth. In this case the other lights will not flicker. A similar effect can happen when the bulb connections aren't positive.

If all the lights flicker it must be the voltage that is fluctuating due to poor wiring connections or a fluctuating charge rate/alternator performance.

May 06, 2017 | Cars & Trucks

1 Answer

Turn signail flasing very fast tail light don't work


Turn signal bulb is burned out most likely cause.

Mar 01, 2013 | 2004 Chevrolet Cavalier

1 Answer

Dash lights and running light doesnt work


check switch with a voltmeter

Mar 15, 2012 | Cars & Trucks

1 Answer

Left signal clicking too fast when signal is turned on


Most likely you have a bulb butnt out put your turn signail on and do a walk around of the vehicle. to find the bulb that needs replaceing.

Or if you have recentley changed out the blinker realy you put the wrong realy in, Different vehicles have different realays

good luck

Nov 29, 2010 | 1997 Ford Contour

1 Answer

I installed a 1987 monte carlo steering column in my 30 ford hot rod i need the color code of the wires so i can conect the directional signails up


H).l-blu wire connect to left front turn signal J).dk-blu wire connect to right front turn signals K).brown wire connect to hazard/flasher relay output L).purple wire conect to turn/flasher signal M). yellow wire connect to left rear stop hazard light N). dk-green wire connect to right rear stop/hazard light P) white wire connect to stop light swirch output

Jun 25, 2010 | Cars & Trucks

1 Answer

How do I change the front and rear turn signals in a 1997 Chevy Cavalier?? Thanks!


a come on???? very easy get a screwdriver ,kitchen knife ,ect ect click out turn signails ,,then click out connection .put connection into new one then click new turn signals back into car,,JOB DONE

Jun 18, 2010 | 1997 Chevrolet Cavalier

1 Answer

I have running lights but no signail lights on a ranger ford truck


if the lights come on but don;t blink? its the flasher if they won;t come on at all! its a fuse or fuse link or a defective turn signal switch

Jan 13, 2010 | 2008 Ford Ranger 2WD

1 Answer

Brake lights wont work unless the head lights are on and turn signails will will light up to


Normally due to a bad earth - connection either by feed cable or grounding to the bodywork on the car at the rear light's.
Sometime's happens when a towbar is incorrectly fitted (bad wiring)

Sep 21, 2009 | 1999 Pontiac Montana

1 Answer

Turn signals in front don't work


the lowers being gone DOES affect the front ones, as they work on a closed circuit. Until you replace them, you'll have no front signail lights.

Sep 06, 2009 | 1997 Honda Accord

1 Answer

Turn signails dont work only when u shake steering columon


You can do this but you need a manual to guide you through it safely. haynes has fairly good diagrams and instructions. pick one up before you begin. I'd write it out but it's way too long.

Mar 26, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
1996 GMC Sonoma Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...