Question about Ford Escort

1 Answer

The blower will not work for AC or Heater - Escort Ford Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,537 Answers

Usually this is the Blower Motor Resistor problem. You did not give a Year or Model for your problem. I can tell you that from 1992-2004 on the Crown Vic, Mercury Marquis models most are on the Firewall. Whether this is your application or not, just follow the power wires from the Blower motor to a connection that usually has 2 bolts and 1 connector sticking out of the ductwork under the hood.

90% of these parts are hidden inside the ductwork. Most seem to be behind the heater hoses coming out of the engine. Usually you have to disconnect at least 1 hose for the part to clear when removing. The good news is you can test this as a solution by removing the connector from the hidden part and attaching the connector to the new part. When you turn on the Blower, it should work immediately. Then exchange the new and old part.

You can check the fuse panel if you want to if this does not work. But anything that blows the fuse needs to be replaced before you blow a second fuse.

Also if you have a truck or SUV there is more room under the dash; the Resistor may not be under the hood. So if you do not see the blower wires attaching to anything on the Firewall, chances are the part is in the cabin under the dash and near the heater core.

Go to your favorite Autoparts and have them show you what you are looking for. This is an easy repair if you do not have to disassemble the ductwork.

Posted on Oct 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a1999ford contour heater/ac don't work I have replaced the blowermoter and restister and check the bender door is working!! so why isn't the ac/heater working???????


By A/C an heater not working , you mean the blower motor isn't running an pushing air through ducts an vents . Before replacing parts did you look at a diagnostic flow chart an check power an ground to the blower motor . We test not guess ! Videos on youtube for testing blower motor circuits . Blower Motor Problems Auto Repair Help

Sep 26, 2016 | 1999 Ford Contour

1 Answer

Heater and a./c and blowers not working 1993 jaguar xj6


A defective HVAC blower motor controller, or relay/micro switch in the control panel may cause the heater/AC blower motor not to work.

Mar 09, 2014 | 1993 Jaguar XJ6

1 Answer

1992 323 mazda want blow heat out


REPLACE THERMOSTAT.IF ALREADY DONE.CHECK HEATER BLOWER MOTOR SEE IF POWER GOING TO HEATER BLOWER MOTOR.IF YES BLOWER MOTOR BAD.IF NO POWER GOING TO BLOWER MOTOR CHECK AC AND HEATER CONTROL FUSE AND CHECK BLOWER MOTOR FUSE AND RELAY IF ALL IS GOOD CHECK SEE IF POWER GOING TO AC AND HEATER CONTROL SWITCH IF YES THE AC AND HEATER CONTROL SWITCH COULD BE BAD.

Nov 10, 2011 | 1991 Mazda 323

1 Answer

Heater and air stopped working on my 2000 Ford Focus zx3


CHECK BLOWER MOTOR FUSE AND RELAY.SEE IF POWER GOING TO BLOWER MOTOR YOU HAVE FAULTY BLOWER MOTOR.IF BLOWER MOTOR FUSE AND RELAY OKAY.IF NO POWER GOING TO BLOWER MOTOR BUT POWER AT AC AND HEATER CONTROL SWITCH. BLOWER MOTOR HAS POOR GROUND OR AC AND HEATER CONTROL SWITCH IS BAD.

Jun 12, 2011 | 2000 Ford Focus

1 Answer

My 97 buick lesabre limited heater/ac blower quit, it has the climate control,I checked all fuses.


REMOVE HEATER BLOWER MOTOR HOT WIRE BLOWER MOTOR IT.IF IT WORKS.YOUR AC AND HEATER CONTROL SWITCH IS FAULTY.CHECK HVAC FUSES AND CHECK BLOWER MOTOR RELAY.IF BLOWER MOTOR DONT WORK WHEN HOT WIRE REPLACE IT.IF ALL CHECK OUT GOOD.HAVE DEALERSHIP DO A DIAGNOSTIC TEST ON YOUR CLIMATE CONTROL SYSTEM.

Dec 02, 2010 | 1997 Buick LeSabre

1 Answer

THE AC WONT BLOW OR THE HEATER


CHECK BLOWER MOTOR FUSE AND RELAY.IF BOTH GOOD.REMOVE BLOWER MOTOR HOTWIRE IT.IF DONT WORK REPLACE BLOWER MOTOR.IF BLOWER MOTOR WORKS.HEATER AND AC CONTROL SWITCH IS BAD.

Apr 30, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

Heater/AC blower works on high only


Blower housing resistor fried up.You will have to replace whole blower assembly.

Jan 04, 2010 | 2002 Chevrolet Impala

1 Answer

2004 Ford F150 - AC/Heater blower speed 1 & 2 not working.


You might have a bad speed selector switch, or your blower motor resistor is faulty.

Mar 17, 2009 | 2004 Ford F150

2 Answers

1983 Chevrolet Suburban Heater fan not working


Heater blower motor resister is bad, replace, located under dash above heater motor.

Mar 15, 2009 | 1983 Chevrolet Suburban

1 Answer

Heater/ac blower


Usually when the blower loses speeds over time the problem is the blower motor sensor.luckily these are relatively cheap.

Nov 13, 2008 | 2001 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...