Question about Dodge Pickup

1 Answer

Fuse box diagram for 1997 dodge ram 1500 horn relay

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,420 Answers

Welcome To FixYa.com,

What size engine do you have, Lee



Regards, Lee Davidian


A 4'''' Thumbs up is appreciated so please take the time to rate me. Testimonials are accepted,

Thank you, Lee Davidian

Posted on Oct 03, 2010

  • 3 more comments 
  • Auto Repair Help
    Auto Repair Help Jan 03, 2011

    DTC P1520:
    RADIATOR FAN RELAY NO. 1 CIRCUIT HIGH INPUT






    1. Turn ignition off. Connect test mode
    connector. See
    color:blue">Fig. 2color:black"> . Turn ignition on. Using voltmeter connected to ground,
    backprobe ECM connector B134 terminal No. 3. If voltage changes between zero
    and 10 volts, system has returned to normal. Check for



    intermittent open in wiring
    or connectors. If voltage does not change between zero and 10 volts, go to next
    step.



    2. Turn ignition off. Remove main fan relay and
    sub fan relay No. 1 (if equipped). Turn ignition on. Using voltmeter connected
    to ground, backprobe ECM connector B134 terminal No. 3. If voltage is more than
    10 volts, repair short to voltage in relay control



    circuit. After repair,
    replace ECM. If voltage is 10 volts or less, go to next step.

    DTC P1520: RADIATOR FAN RELAY NO. 1 CIRCUIT HIGH INPUT


    1. Turn ignition off. Connect test mode connector. See Fig. 2 . Turn ignition on. Using voltmeter connected to ground, backprobe ECM connector B134 terminal No. 3. If voltage changes between zero and 10 volts, system has returned to normal. Check for

    intermittent open in wiring or connectors. If voltage does not change between zero and 10 volts, go to next step.

    2. Turn ignition off. Remove main fan relay and sub fan relay No. 1 (if equipped). Turn ignition on. Using voltmeter connected to ground, backprobe ECM connector B134 terminal No. 3. If voltage is more than 10 volts, repair short to voltage in relay control

    circuit. After repair, replace ECM. If voltage is 10 volts or less, go to next step.

  • Auto Repair Help
    Auto Repair Help Jan 03, 2011

    mso-fareast-theme-font:minor-fareast;color:red;mso-ansi-language:EN-US;
    mso-fareast-language:EN-US;mso-bidi-language:AR-SA">mso-fareast-theme-font:minor-fareast;color:red;mso-ansi-language:EN-US;
    mso-fareast-language:EN-US;mso-bidi-language:AR-SA">lee

  • Auto Repair Help
    Auto Repair Help Jan 03, 2011

    TC P1520: RADIATOR FAN RELAY NO. 1 CIRCUIT
    HIGH INPUT
    color:red">





    1. Turn ignition off. Connect test mode
    connector. See Fig. 2 . Turn ignition on. Using voltmeter connected to
    ground, backprobe ECM connector B134 terminal No. 3. If voltage changes between
    zero and 10 volts, system has returned to normal. Check for



    intermittent open in wiring
    or connectors. If voltage does not change between zero and 10 volts, go to next
    step.



    2. Turn ignition off. Remove main fan relay and
    sub fan relay No. 1 (if equipped). Turn ignition on. Using voltmeter connected
    to ground, backprobe ECM connector B134 terminal No. 3. If voltage is more than
    10 volts, repair short to voltage in relay control



    circuit. After repair,
    replace ECM. If voltage is 10 volts or less, go to next step.



    3. Turn ignition off. Remove fan relay. Using an
    ohmmeter, check resistance between main fan relay terminals. See Fig. 12
    . If resistance is less than one ohm, replace main fan relay, then replace ECM.
    If resistance is one ohm or more, go to next step.






    Fig. 12: Measuring Fan Relay
    Resistance
    color:black">


    Courtesy of SUBARU OF
    AMERICA, INC.
    color:black">





    4. If vehicle is not equipped with sub fan relay
    No. 1, go to next step. On vehicles equipped with sub fan relay No. 1, check
    resistance between sub fan relay No. 1 terminals No. 1 and 3. See
    Fig.
    12
    color:black"> . If resistance is less than one ohm, replace sub fan relay


    No. 1, then replace ECM. If
    resistance is one ohm or more, go to next step.



    5. Check for poor terminal contact in ECM
    connector. Repair as necessary. If terminal contact is okay, replace ECM.






    TC P1540: VEHICLE SPEED SENSOR (VSS)
    MALFUNCTION 2 - EXCEPT I

    TC P1520: RADIATOR FAN RELAY NO. 1 CIRCUIT HIGH INPUT


    1. Turn ignition off. Connect test mode connector. See Fig. 2 . Turn ignition on. Using voltmeter connected to ground, backprobe ECM connector B134 terminal No. 3. If voltage changes between zero and 10 volts, system has returned to normal. Check for

    intermittent open in wiring or connectors. If voltage does not change between zero and 10 volts, go to next step.

    2. Turn ignition off. Remove main fan relay and sub fan relay No. 1 (if equipped). Turn ignition on. Using voltmeter connected to ground, backprobe ECM connector B134 terminal No. 3. If voltage is more than 10 volts, repair short to voltage in relay control

    circuit. After repair, replace ECM. If voltage is 10 volts or less, go to next step.

    3. Turn ignition off. Remove fan relay. Using an ohmmeter, check resistance between main fan relay terminals. See Fig. 12 . If resistance is less than one ohm, replace main fan relay, then replace ECM. If resistance is one ohm or more, go to next step.


    Fig. 12: Measuring Fan Relay Resistance

    Courtesy of SUBARU OF AMERICA, INC.


    4. If vehicle is not equipped with sub fan relay No. 1, go to next step. On vehicles equipped with sub fan relay No. 1, check resistance between sub fan relay No. 1 terminals No. 1 and 3. See Fig. 12 . If resistance is less than one ohm, replace sub fan relay

    No. 1, then replace ECM. If resistance is one ohm or more, go to next step.

    5. Check for poor terminal contact in ECM connector. Repair as necessary. If terminal contact is okay, replace ECM.


    TC P1540: VEHICLE SPEED SENSOR (VSS) MALFUNCTION 2 - EXCEPT I

  • Auto Repair Help
    Auto Repair Help Jan 03, 2011

    Fig 2

  • Auto Repair Help
    Auto Repair Help Jan 03, 2011

    hil

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
noranda21
  • 1547 Answers

SOURCE: my fuse and relay box

its not a relay its a fuse its in your fuse box inside vehicle are your fuses marked on back side of cover should say what there for happy holidays

Posted on Dec 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse box on a,98 Dodge RAM 1500


Leonard, interior fuse panel is open drivers door, at the end of dash driver side behind a small interior access panel, under hood fuse/relay center(box) is beside battery on inner fender.
Video links will show you fuse boxes location.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Interior Fuse Box Location 1994 2001 Dodge Ram 1500 1997 Dodge Ram 1500 5...

Dodge ram 1500 fuse box gone bad

Feb 29, 2016 | Dodge Cars & Trucks

1 Answer

Horn relay located


Under the hood by battery, there should be a black box pull the top off and it's in there along with your abs relay

Jan 02, 2013 | 1997 Dodge Ram 1500 Club Cab

1 Answer

No horn 1997 dodge ram 1500 where is fuse


should be under the hood on the drivers side in a fusebox. There's also a fusebox above the pedals inside the cab. The one under the hood should have a diagram showing you where the horn fuse is. If you want to look for one inside the truck, you need to look in your owners manual. Keep in mind, there's also a relay for the horn.

Jun 23, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

My fuse and relay box diagram does not show a horn relay where else would it be located at? i have a 2004 dodge ram 1500 v8 5.7 hemi


its not a relay its a fuse its in your fuse box inside vehicle are your fuses marked on back side of cover should say what there for happy holidays

Dec 15, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

HOW DO I PUT GAS FOR AC AND MY HORN FUSE KEEPS SHORTING OUT EVERY TIME I TRY TO USE THE HORN ON MY 1997 DOGE RAM


Gas? Do you mean freon? As for the fuses, replace the horns, they are shorted to ground.

Jul 05, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

The horn is not working and i dont know where to begin in fixing it


check the horn relay,located under the hood in the fuse and relay box.

May 15, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Horn doesn't work ,how do I test it to find the problem


an easy way is to switch relay with one that you know is good. aslong as the numbers are the same it can be switched. most all the relays in your dodge ram are the same.

May 28, 2009 | 1995 Dodge Ram

3 Answers

96 Dodge Ram 1500 wiring diagram for headlights.


Here's a link to a pdf file containing the headlight wiring diagram for your year model Dodge Ram 1500..
I can't help but notice that you say you've replaced the headlight relay? That's quite odd, because there is NO headlight relay on this vehicle- only a 40 amp fuse located in the power distribution box that sits behind the battery inside the engine bay.
The switch is notorious for burning out because there is NO RELAY on this vehicle, and there is a recall (#819) but this only affects 3500 models even though the headlight wiring is the same for 1500,2500 and 3500 model Rams.
Here are two more links that will help you troubleshoot your headlights problems.
HereInformation on Putting a Relay in the Wiring System

Mar 07, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...