Question about 1997 Chevrolet Monte Carlo

1 Answer

I am trying to locate the evap canister on my 97 monte carlo

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 5,332 Answers

It will be the black bow under the car near the fuel tank. Should have 2 or 3 hoses going to it.

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is evap sensor located on 2006 chevy monte carlo ss


Is there a diagram under the hood that shows the location or approximate location for something evap
Usually its a evap vent solenoid and canister both are located above the gas tank.

Oct 26, 2015 | Cars & Trucks

1 Answer

I have replaced both oxygen sensors and light keeps coming on? I have replaced catalyctic converter as well.


have u ck for codes,had a 99 monte canister in drives rear quarter panel was bad evap cat & emission code,,ck it out,advance auto or autozone scans for free,,codes that is,,

Feb 25, 2013 | 2001 Chevrolet Monte Carlo

1 Answer

Engine light code p0455 chev monte carlo


Hello,The problem is that the EVAP system is not able to achieve or maintain vacuum during the diagnostic testThe control module tests the evaporative emission (EVAP) system for a large leak. The control module monitors the fuel tank pressure (FTP) sensor signal to determine the EVAP system vacuum level. When the conditions for running the test are met, the control module commands the EVAP canister purge solenoid valve OPEN and the EVAP canister vent solenoid valve CLOSED . This allows engine vacuum to enter the EVAP system. At a calibrated time, or vacuum level, the control module commands the EVAP canister purge solenoid valve closed, sealing the system, and monitors the FTP sensor input in order to determine the EVAP system vacuum level. If the system is unable to achieve the calibrated vacuum level, or the vacuum level decreases too rapidly, the PCM will set the code you now have.So, you either have a stuck open purge valve, a stuck open vent valve, a false reading fuel tank pressure sensor, or a cracked/broken EVAP line.

Sep 21, 2012 | 2004 Chevrolet Monte Carlo

2 Answers

I have a 2004 Monte Carlo. Have there been issues trying to fill the gas tank? I can't open up a gas nozzle as it stops like the tank is full. The gas just does not go down cleanly, backing up or...


You either have an obstruction in the filler tube or the vent tube on the filler is clogged so it is not allowing air to escape as the gas is going in.

Jan 08, 2011 | 2004 Chevrolet Monte Carlo

1 Answer

Where is the EVAP canister and solenoid sensor located on a 1997 monte carlo Z34


they are both located on the front of the engine along the fuel rail they are plug in to black hard lines and the bolt on to the intake

Jun 12, 2010 | 1997 Chevrolet Monte Carlo

2 Answers

P0441 EVAP Control System Incorrect Purge Flow


Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Evaporative Emission (EVAP) Canister Purge Regulator Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Purge Solenoid Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Sealing faulty.
Pipes between Tank Breathing and Throttle Body leaky/blocked.
Hose connection(s).
Intake leak.
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve.
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.
VSV connector near air filter box disconnected.

Jun 15, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

'96 Chevy Monte Carlo- codes P0441 and P1655


it will be the evap solenoid that will be the problem,not sure where it is in that car, sorry

May 17, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

2002 monte carlo EVAP problem continues.


did you try a vent solenoid? this is located behind left rear wheel in fender.

Nov 07, 2008 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
1997 Chevrolet Monte Carlo Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...