Question about Land Rover Range Rover

1 Answer

Torque setting for '97 Range Rover 4.0 oil pan

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Land Rover Master
  • 22,114 Answers

Pull wrist tight on a 38th drive rachet ,thats about right or 20nm according to my fancy autodata book ,never used a torque wrench on anything in 40yrs of being a fitter ,i must be a cowboy then musnt i

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 land rover range rover hse transmission is overheating and drives like it's in sand or mud. Also have air suspension inactive warnings along wIth HDC inactive suspension light dosent even lightup


check that you are not in 4 x 4 settings on hard surface as that loads up the transmission making it work harder
that it turn can over heat the transmission oil
check for correct oil level in transmission as too much oil or not enough will also heat oil
take it to an accredited service center that has experience on your make of vehicle for a diagnosis of all problems

Nov 30, 2016 | BMW Cars & Trucks

2 Answers

98 jeep wrangler tj 4.0 oil pan bolt pattern or layout. An torch specs


Bobby, oil pan bolt torques for 4.0 Wrangler. Oil Pan Bolts 1/4 84 in-lbs Oil Pan Bolts 5/16 132 in-lbs As far as sequence, see last link, start in center, criss cross pattern tighten snug all, then repeat to torque spec.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Oil Pan Gasket leaking
http://jeephorizons.com/tech/99_40l_torque_specs.html
98 jeep 4 0 oil pan bolt torque sequence specs Google Search

May 21, 2016 | Jeep Cars & Trucks

1 Answer

What is the right oil and filter to use on the range2007 hse?


How To Change Oil and Oil Filter on Range Rover Sport or Land Rover LR3

  • Place an oil drain pan below the oil filter and drain plug and unscrew the oil filter.
  • Lubricate the rubber seal with clean oil and install the new filter. Tighten to 13 foot-pound torque.
  • Remove drain plug in the oil pan and drain the oil. Catch the oil in the drain pan. After draining the oil install and tighten the drain plug to 18 foot-pound torque.
  • Fill engine with 5W-30 weight oil. The 4.4 V8 takes 8 quarts; the 4.0 V6 takes 6 quarts. Start engine and check for leaks.
  • Recheck level and top up as necessary.
  • Reinstall the under engine shields / skid plates.

Apr 12, 2015 | Land Rover Range Rover Cars & Trucks

1 Answer

Replace oil pump in 94 grand am


the 2.3 and 3.1 engines need to drop oil pan.for the 3.3 engine you have to remove timing chain cover.you have to remove oil filter adapter the pressure regulator valve and the valve spring.then remove oil pump cover to oil pump screws remove cover remove oil pump gears.when installing another new oil pump lubricate the oil pump gears with clean engine oil pack the pump cavity with petroleum jelly.torque oil pan cover screws to 97 inch lbs which would be 11 ft lbs torque.oil filter adapter plate 24 ft lbs.

Jan 11, 2013 | 1994 Pontiac Grand Am

1 Answer

No oil pressure in my rover v8 engine. The car is a TVR 350i 1988 fitted with Rover V8. At the track today it lost oil pressure after a few laps and have no pressure and the oil light is also on. Engine...


You may have sludge in the "pickup tube" which would prevent oil from circulating through the oil pump into the motor. Remove the oil pan and inspect and use a long piece of weed trimmer line to unclog if the tube has any nasty sludge in it. Do NOT alter the length of the tube. Make sure to remove any sludge build up in the pan.

Jul 25, 2010 | 1995 Land Rover Range Rover

2 Answers

Can you tell me the torque settings on a rocker shaft 4.0 petrol and a 4.6 range rover 98-99


on the 4.0 its , first tightning 3nm, second tightning 7nm and its the same for the 4.6 hope that helps

Feb 03, 2010 | 1999 Land Rover Range Rover

1 Answer

No reverse on my Auto Range Rover 2.5 DSE (2000)


I have referred your problem to Graeme Cooper automotive and should get advice within a day or so. However, I had exactly the same problem on another vehicle, also changed the filter and oil. It worked for a while then failed completely.

First, check under the vehicle for any leaking hose that could be causing a pressure drop. Failing that, the bad new is that you probably have a dud torque converter and/or bad clutch packs and it will be an expensive job

Aug 19, 2017 | 2001 Land Rover Range Rover

2 Answers

What is the oil pan bolt torque for a 1992 chrysler le baron?


The torque settings for oil pan replacement is 11ft lbs.

Jul 17, 2009 | 1992 Chrysler Lebaron

1 Answer

Need torque specs for oil pan bolts


torque specs for these bolts can be found in a Haynes or Chilton manual availiable from your local parts store, or maybe at your local library, however these bolts are usually no more than 14 ft pounds, unlike cylinder head bolts, the bolts do not need to have any stretch factor to hold the oil pan gasket in place or sealed.

May 17, 2009 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...