Question about Ford Explorer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'm not to sure what one you did want license plate light or the tag light up high above your back door. I know I am reading license plate so I will say the fuse needs to be replaced. plate lamps need 2 light bulbs and the fuse box is under the steering wheel or under the hood there are 2.
in my book it said that it is a (194 trade number), I woulds change out bulbs and then fuse.
Posted on Dec 29, 2008
the rear one is a single sensor and is located in the top of the rear differential , unplug it and take the retaining bolt out and it pops straight up out of the differential. the front has 1 for each wheel,and is located on the backside of the wheel hub. take the tire off and look on back side of hub it should be the only sensor thare and is anchored with one bolt then just fallow the wire to its disconnect point. this vehicle is known to have problems with the rear sensor so i would replace it first and see if this fixes the problem
Posted on Feb 02, 2009
SOURCE: 98 explorer fog light always on
reference your owners manual for relay location, if you do not have one you can download it at www.fleet.ford.com , the relay for the fog lights should be under hood in power distribution box, ford relay are notorious for hanging up in closed and open positions, pull the relay and see if the lights go out? if so replace relay, try the same for interior lights, that relay should be inside in the fuse box. hope this helps, let me know
Posted on May 23, 2009
Diagnostic Trouble Code (DTC) P0443 indicates a failure in the EVAP canister
purge valve circuit.
Posted on Aug 01, 2009
The ABS light is for the Anti-lock Braking System. The MIL will illuminate if there is a difference in wheel speed sensors signals to the PCM. So you might have a wheel speed sensor that is going out on you. Does the light come on at low speeds, or just higway speeds? You could take the vehicle to a local parts store and have them pull the codes for you and that will tell you which speed sensor is out of whack. Also road grime, dirt and gunk buildup can cause speed sensors to give false readings. Hope tihs helps you out.......
Posted on Oct 22, 2009
Tips for a great answer:
Aug 22, 2012 | 1999 Ford Explorer
Open the hood and remove the electrical plug from the back of the fog light ballast below the headlight assembly.
Turn the fog lamp counterclockwise to unlock it from the fog light housing.
Insert the new fog lamp. Align the notches on the fog lamp housing with the tabs on the new bulb and turn the bulb clockwise to lock it into the housing.
Reconnect the fog lamp electrical plug.
Sep 13, 2010 | 1999 Ford Explorer
Feb 04, 2010 | 1996 Ford Mustang
Nov 24, 2009 | 2005 Ford Explorer
May 18, 2009 | 1998 Ford Explorer
Jan 27, 2009 | 2006 Ford Explorer
Dec 16, 2008 | 2001 Ford Explorer Sport
Sep 25, 2017 | Ford Cars & Trucks
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: