Question about 2001 Dodge Dakota

3 Answers

Programing a keyless remote I do not have any remotes other than the one I would like to program it is for a 2002 dodge dakota quad cab

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Read the complete procedure :-

Keyless Entry - Programming Procedure
Notes

NUMBER: 08-007-02

GROUP: Electrical

DATE: Mar. 25, 2002

SUBJECT:
Remote Keyless Entry (RKE) Programming Procedures

MODELS:

1999 - 2002 (AB) Ram Van/Wagon

1999 - 2002 (AN) Dakota

1999 - 2002 (BR/BE) Ram Pickup

1999 - 2002 (DN) Durango

2002 (DR) Ram Pickup

2001 - 2002 (JR) Sebring Sedan/Stratus Sedan/Sebring Convertible

2002 (KJ) Liberty

1999 - 2002 (LH) Concorde/Intrepid/LHS/300M

1999 - 2000 (NS) Town & Country/Caravan/Voyager

1999 - 2002 (PL) Neon

1999 - 2002 (PR) Prowler

2001 - 2002 (PT) PT Cruiser

2001 - 2002 (RS) Town & Country/Caravan/Voyager

1999 - 2002 (WJ) Grand Cherokee

1999 - 2001 (XJ) Cherokee

DISCUSSION:







A Remote keyless Entry (RKE) Programming Procedures Card (Publication No. 81-170-00011) is being provided with this Technical Service Bulletin to simplify RKE transmitter programming on 1999 - 2002 North American vehicles. Additional copies of the RKE publication, 81-170-00011 (Fig. 1), can be ordered from DDS Distribution Services, LTD. Their number is 1-800-890-4038.

NOTE :THE RECENTLY RELEASED MILLER SPECIAL TOOL, "RF DETECTOR NO. 9001", SHOULD BE USED TO DETERMINE IF THE TRANSMITTER IS WORKING BEFORE BEGINNING PROGRAMMING PROCEDURES. THE RF DETECTOR INDICATES IF THE TRANSMITTER IS WORKING, NOT IF IT IS PROGRAMMED TO A VEHICLE.

DaimlerChrysler North American Remote Keyless Entry Programming Procedures

NOTE :PLEASE READ INSTRUCTIONS FULLY BEFORE ATTEMPTING TO PROGRAM TRANSMITTERS.

Program Method A (Customer Program Method)

1. Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.

2. Turn ignition to run position. (Allow ignition chimes to stop).

3. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.

4. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons (AN/DN release either button first). A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).

5. Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release (a short chime will sound for AN/DN).

6. Press and release any button on the same transmitter and a chime will sound after successfully programming the transmitter (locks will cycle for AN/DN).

NOTE :(FOR DR ONLY) A CHIME WILL NOT SOUND ON STEP # 6 FOR THE FIRST TRANSMITTER PROGRAMMED, BUT WILL SOUND UPON PROGRAMMING THE SECOND TRANSMITTER.

7. Repeat steps 5 through 6 to program additional transmitters.

8. Turn ignition to OFF position. Transmitter programming mode v/ill discontinue after 60 seconds (30 seconds for AN/DN and RS). (All transmitter programming must be completed within time specified).


Program Method B (Customer Program Method)

1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.

2. Turn ignition to the run position (Allow ignition chimes to stop).

3. Using original transmitter, press and hold the [UNLOCK] button on the transmitter for between 4 and 10 seconds.

4. Continue to hold the [UNLOCK] button and press the [PANIC] button. A chime will sound to indicate that the transmitter programming mode has been entered (Allow 3 seconds for chime to sound).

5. Press a button on all transmitters to be programmed into the system including any previously programmed transmitters; a chime will sound when each transmitter has been programmed.

6. Turn the ignition to OFF position to exit the transmitter programming mode.


Program Method C (Dealer Program Method) *Can be used for any type transmitter.

1. Press [LOCK] button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as designed discontinue programming.

2. Turn ignition to the run position (Allow ignition chimes to stop).

3. Plug DRBIII to vehicle's 1-way data link connector.

4. Follow Service Manual and DRBIII instructions to program transmitters.


Program Method D (For use with AB vehicles not equipped with VTSS only)

1. Locate the dark green program enable wire connected to pin # 1 of the 16-way data link connector under the left side of the instrument panel.

2. Connect the program enable wire terminal to a good ground.

3. Insert the key into the ignition and turn the ignition switch to the ON position. The power locks will cycle (Lock and Unlock) indicating that program mode has been entered.

4. Using the transmitter to be programmed, press either [LOCK] or [UNLOCK]. The power locks will cycle indicating the transmitter has been programmed successfully.

5. Repeat step 4 to program additional transmitter.

6. Disconnect the program enable wire from ground to exit program mode.

7. Turn the ignition to the OFF position and remove the key.

NOTE :REFER TO DAIMLERCHRYSLER MDS2 SYSTEM OR PARTS DEPARTMENT TO OBTAIN THE CORRECT PART NUMBER AND REVISION FOR SPECIFIED VEHICLE.

POLICY:
Information Only

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Oct 03, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Unfortunately, nobody who answered bothered to read your question properly. Rather than insult anybody's intelligence (which would not be too difficult considering the answers) I will go ahead and tell you what you need to know. The simple answer is without a working remote, a dodge vehicle with keyless remote entry (KRE) can NOT be put into programming mode unless you have a working remote or you happen to have a dodge only scanner called a wiTech tool. This uses a Chrysler developed protocol called DRB III to access the non ODB II functions that are Dodge specific and to effect programming od the ECU/EEC. Thats it. One or the other. A working remote or the tool. There is simply no other way to program Chrysler/Dodge remotes. The tool goes for around 2500 bucks used. Your best bet is to go to a local dealer. Sometimes if they are benevolent or you have a service relationship with them they will do it for no charge. Otherwise a typical cost to program a remote is around 50 dollars. Once you have a working remote then you can program spares with your working remote.

Posted on Nov 07, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

This forum has the answer you're looking for: http://www.dodgedakota.net/boards/dea/373.html Sometimes you have to order a new remote from the distribution service or car dealership. Hopefully the forum can answer your question so you won't have to buy a new one. http://www.centurylogistics.ca/distribution.html

Posted on Sep 23, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MNfisherman
  • 11896 Answers

SOURCE: I need to know how

  • Push the "Lock" button on the working remote five times. Do this in two-second intervals.
  • 2 Put the key in the ignition and turn it to the "On" position. "On" is the last position before starting the engine.
  • 3 Push and hold the "Unlock" button on the working remote. Hold it for about 10 seconds.
  • 4 Push the "Panic" button for one second while you hold the "Unlock" button and let them go at the same time. There will be a chime to alert you that the programming mode has begun.
  • 5 Push and release the "Lock" and "Unlock" buttons on the remote you wish to program within 30 seconds of the chime. Then push the "Unlock" button once. A chime will sound and the door locks will cycle indicating the remote has been programmed.
  • 6 Repeat step 5 for each additional remote you need to program.

  • Posted on Sep 19, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Panic alarm does not work. Locksmith verified that it is not the remote fobs.


    central timer module" - Dodge Dakota Forum

    www.dodgedakota.net/boards/gen/21983.html

    Jan 2, 2009 - 21 posts - ‎18 authors
    I have a Dak 2000 3.9 Ltr V6, Single Cab, Bare Bones. ... Panic Mode .... ooops....i mean the remote entry and alarm system does NOT work ... i have a 2002 dakata where can i buy a ctm looked all over nobody sell them can thay be rebuilt ... I was out the door $550.00, and they washed the truck also.

    Truck wont work/Key Fob won't work/wont start/wont do anything ...

    www.ramforumz.com > ... > Electrical

    Apr 10, 2010 - 10 posts
    Truck wont work/Key Fob won't work/wont start/wont do anything! ... Maintenance & Repair > 3RD Generation Dodge Ram - 2002 to 2008 Dodge Ram Trucks > Electrical... Soon as I manually unlock the door, and open it.... the factory panic alarm starts going off. .... Vehicle: 2004 Dakota Club Cab 4X4.

    alarm going off when opening the door.. embarrassing and annoying ...

    www.cumminsforum.com > ... > 3rd Gen. Non-Powertrain

    Jan 12, 2012 - 11 posts - ‎9 authors
    how do I stop my trucks alarm from going off when I open the door? it did it ... to thetruck and opened driver door (it was unlocked) and the alarm started going off. ... I do not have a remote unlocking device (or it doesnt work) so I do all .... alarm will go off then I have to use the FOB panic button to shut it off.

    Keyless entry/panic button/alarm - Dakota Durango Forum

    www.dakota-durango.com > ... > Gen III Dakotas

    Jan 10, 2016 | 2002 Dodge Dakota Club Cab

    1 Answer

    Remote programming for 2002 Dakota?


    you can use MVP key programmer to program the new keys.

    i think MVP key programmer can do your car.

    May 06, 2012 | 2002 Dodge Dakota Club Cab

    1 Answer

    Keyless remotes not working


    Try reprogramming the remotes. Here are the instructions for the procedure. Hope it helps. Cobra!
    Programming NOTE: All keyless entry remote transmitters (15K601) must be programmed at the same time.
    NOTE: To program (or reprogram) the keyless entry remote transmitters into the RAP module, perform the following steps:
    1. Make sure that the anti-theft system is not armed or triggered.
    1. Turn the ignition switch (11572) from OFF to RUN eight times within ten seconds, ending in RUN. If the RAP module has successfully entered program mode, it will lock and then unlock all doors.
    1. Within 20 seconds, press any button on a keyless entry remote transmitter, and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been programmed. Repeat this step for each transmitter.
    1. If the door locks do not respond for any keyless entry remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Inspection and Verification.
    1. Turn the ignition switch to the OFF position, or wait up to 20 seconds after step 2, to exit program mode. If a keyless entry remote transmitter has been programmed (or reprogrammed), the RAP module will lock and unlock all doors one last time to confirm.

    Jun 06, 2010 | 1998 Ford F150 Regular Cab

    1 Answer

    Keyless remote stopped working, I replaced battery


    The 1997 to 2003 Dodge Caravan and Grand Caravan use a standard key and remote setup with a separate remote fob. However, the 2004 to 2009 Dodge Caravan and Grand Caravan use a combination key and remote on one device. To program a new keyless entry remote for the 1997 to 2003 Dodge Caravan, you must have at least one functional remote, which is required to enter synchronization mode. To program the combination key for the 2004 to 2009 Dodge Caravan, you must have two functional combination keys. If you do not, you'll need to see an authorized Dodge dealer for keyless entry programming assistance.


    2004 to 2009 Caravan Programming Instructions
    1. Insert one of your working combination keys into the ignition. Turn it to "On"; leave it in this position for about 10 seconds but no longer than 15 seconds. Turn it to "Off" and remove it.
    2. Insert your second working combination key into the ignition within 15 seconds of removing the previous key. Turn it to "On". After 10 seconds, you'll hear a chime and the "Theft" light will begin to flash, entering synchronization mode. Turn the key to "Off" and remove it.
    3. Insert the combination key you want to program. Turn it to "On." After 10 seconds, you'll hear a chime; then the "Theft" light will turn off. When the light turns off, the combination key--including the key and the remote--is programmed.
    4. Repeat Step Three for each combination key you want to program. A total of eight can be programmed.
    Hope this help (remember comment and rated).


    May 08, 2010 | 2008 Dodge Grand Caravan

    1 Answer

    How to program a new remote keyless entry for 2002


    1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
    2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
    go without cranking engine). Wait for ignition chimes to stop.

    3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
    seconds.

    4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
    press the PANIC button ( on the programmed remote ) for 1 second and release both
    buttons. A chime will sound to indicate that the remote programming mode has been
    entered ( allow 3 seconds for chime to sound ).

    5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
    simultaneously then press and release just the UNLOCK button on the same remote.
    A chime will sound indicating the remote has been programmed. Press and release
    the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
    each new remote you wish to program at this time. Locks will cycle after each additional
    remote is programmed.

    6. Turn the ignition OFF and remove key.
    7. Test Remotes.


    Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

    Nov 02, 2009 | 2002 Dodge Durango

    2 Answers

    How do I program a replacement keyless entry transmitter?


    I have a 2003 dodge durango i dont have a working keyless remote how do i program one to kork.

    Jun 07, 2009 | 2003 Dodge Durango

    1 Answer

    Doors wont open with keyless remote.


    I am taking the truck up to the lock smith and having it re-programed. This should take care of the problem.

    Mar 30, 2009 | 2006 Dodge Dakota

    1 Answer

    Keyless remote transmitter programming


    You will have to have a Jeep/Chrysler/Dodge service tech hook up their programed OBD2 scanner to reset.

    Jan 27, 2009 | 2002 Jeep Grand Cherokee

    1 Answer

    2000 dodge neon alarm


    This is what i found but you need one fob.

    here is another way if you can get it done( i bevlieve) There is a box under the dash of your can it says keyless entry if you have the right box and the fab just plug and play.

    Make sure you get the screws in the defrost vent there is some screws and then it there is snaps


    http://shopping.msn.com/specs/keyless-entry-remote-fob-clicker-for-2004-dodge-neon-with-do-it-yourself-programming-requires-1-wor/itemid1124228415/?itemtext=itemname:keyless-entry-remote-fob-clicker-for-2004-dodge-neon-with-do-it-yourself-programming-requires-1-wor

    Nov 15, 2008 | 2002 Dodge Neon

    Not finding what you are looking for?
    2001 Dodge Dakota Logo

    Related Topics:

    3,154 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8140 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...