Question about 2002 Pontiac Grand Prix

2 Answers

Breaking i have poor breaking i can push the break padel to the floor just for fluid in the break

Posted by on

  • Anonymous Mar 20, 2014

    hard break peddle , no break fluid at rear breaks

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

If brake pedal goes all the way to floor you have a bad master cylinder. Or air in system.

Posted on Jul 08, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

There is a big rober hose by the power booster start the car up and then turn the car off then unplug the hose if you hear like air the the booster is ok but if not then most likelly the powwer booster is not good

Posted on May 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan Tiida 2007 model vehicle problem the abs kicks in but no light on the dash. It would kick in while stopping at a stop street or anywhere but intermittently. Brake discs/pads tyres replaced.


try bleeding lines, that can happen with air bubble in check valve, some check valves have a bleeder on them, if not set emergency break on rear it will push fluid back to master cyclinder, for front wheels collapes calipers to push fluid back. first look at mater cyclinder if tilted up you may need to lift front or back to level cyclinder before starting. Have used a baby nose cleaner to remove air bubble from master cyclinder be sure engage break padel when pulling fluid from master cyclinder

Sep 19, 2017 | Nissan Cars & Trucks

1 Answer

When I push on the break pedal oil comes out on the inside


from the Break pipe or cylinder ....... when all the liquid had leaked you will no longer have working breaks so stop driving the car and have it picked up and taken to garage asap

Mar 29, 2014 | Toyota Corolla Cars & Trucks

1 Answer

1997 Dodge Ram 1500 less sensitive breaks.


your master cylinder is leaking Internaly from the front to the back, all you can do is replace it sorry but you ask.

Mar 07, 2013 | Cars & Trucks

1 Answer

Break padel is hard to push and gas is geting inti the breakbroster


Are you sure it is gas, and not brake fluid, from a failed master cylinder? I don't see how gas could get there from the vacuum line from the intake manifold.

May 03, 2012 | 1989 Ford Ranger

1 Answer

When i push my break pedal it goes to the floor but i am not loosing any fluid


Usually when there are no fluid leaks and the brake pedal goes to the floor it's because the master cylinder has failed.

Jun 16, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

I have dofge caravan 2002. Breake light stay on all the time, even if the breake padel is not pressed


Check your brake fluid level!! This is usually a warning light when your brake fluid gets too low. This could be due to normal pad wear in which case you will need a brake replacement or it could be due to a leak in the system letting the fluid run out of the vehicle. Either way you need to get this fixed ASAP, no brake fluid = no stopping.

Apr 06, 2011 | 2002 Dodge Grand Caravan

2 Answers

Whenever I push the Break Padel. It works slowly and if I push it more harder it goes all the way down and lose the pressure as well. As a result the breaks don't work. Please help me and tell me the...


A bad booster will make for a hard pedal. I would check the brake fluid , if it is full most likely a bad master cylinder.If it is low the i would search for the leak.As the breaks wear the fluid will need to be topped off from time to time. hello from USA

Jan 11, 2011 | Nissan Pickup Cars & Trucks

1 Answer

Trouble Bleeding Break Line


you need to hold in the metering valve.when you bleed the front brakes.long as the valve closed off you wont be able to bleed front brakes.better to get extra help.hard to bleed by your self .

Apr 20, 2009 | 1988 Oldsmobile Delta 88

1 Answer

98' mercury mystique break problem


You most likely have had the Brake master hydraulic cylinder go out, if u don't know cars this is a job for a shop to repair.

Jan 08, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
2002 Pontiac Grand Prix Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8825 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...