Question about 2000 Pontiac Grand Prix

1 Answer

Blower only worked on #5 now no air moving. Does the blower need replacing or is there a fuse involved?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 7,772 Answers

There is a fuse, but your resistor is also bad.

Please see my tip at http://www.fixya.com/cars/r6234839-doesn_t_heater_or_air_conditioner_blow . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Suzuki x4 2009 fan does not spin but when I turn air on it blows cold air.


Not sure which fan you mean. Engine cooling fan is different from heat/air blower fan.

Feb 04, 2015 | Suzuki Cars & Trucks

1 Answer

The air only works on full blast.


Might be the Resistor pack located close to the blower. It has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. The blower connector may be loose. Let me know what you find.

Aug 28, 2011 | 2006 Jeep Commander

1 Answer

I have a 1997 3.8 Camaro. The ac and all works great, but when i turn the ac module/ heater control unit inside the car, down to setting one or two, it blows the fuse. Ive tried replacing the module, but...


Might be the Resistor pack located close to the blower. It has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. The blower connector may be loose. Let me know what you find.

Aug 28, 2011 | Chevrolet Camaro Cars & Trucks

1 Answer

Blower on AC/Heater doesn't alway work is it the the blower mower or .... Fuse is Ok


Might be the Resistor pack located close to the blower. It has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. The blower connector may be loose. Let me know what you find.

Aug 27, 2011 | 1998 Oldsmobile Eighty Eight

1 Answer

Air conditioner fan does not go on. Works intermittently. It it's on and not working - it will suddenly go on and work fine. Help! Thanks.


Might be the Resistor pack located close to the blower. It has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. The blower connector may be loose. Let me know what you find.

Aug 25, 2011 | 2001 Oldsmobile Intrigue

1 Answer

Blower motor only works on the high setting,does it need to be replaced?


Might be the Resistor pack located close to the blower. It has a flat connector with 4 or 5 wires, and two small screws holding in the duct. It may be a crispy critter. It happens... The blower moves air across it to keep it cool. The blower motor may be bad as well, or possibly the fan speed switch. May very well be the fuse for the blower as well. Let me know what you find.

Aug 22, 2011 | 2000 Dodge Caravan

1 Answer

Fan is not working even i use air condition or heater no air coming out and i don't know which one to replace?


First check the fuse for the heater/ac fan. If the fuse is OK, you probably need a new blower motor. If the fuse is blown, replace it. If it blows again, you could have short in the heat/ac control computer, or the blower motor may still be bad. In this vehicle, the blower motor is probably less expensive to replace than the controller, and you can test the blower once it is disconnected by applying battery voltage to it (observe correct polarity). If it does not move when jumped directly to the battery, it is almost certainly bad.

Dec 20, 2009 | 2003 Acura 3.2TL

1 Answer

The airconditioner only works in my 2006 H3 when the car is physically moving over 25 mph. If it is going slow or idling there is no air coming from the blower/fan. When it does blow it is only on a low...


There is a HVAC relay and FUSE in the under hood fuse box, have you check both of these? If the blower works on any speed, the blower is good. You say it blows on lowest speed? The blower speed resistor is mounted on the blower housing. The HIGH SPEED BLOWER RELAY is mounted on the blower motor. You may have multiple problems but check fuses first, if all is OK, then a qualified repair shop will need to check further. You do NOT need the whole A/C system replaced. If it does blow cold, thats good, you just need the blower working.

Nov 03, 2009 | 2006 Hummer H3

4 Answers

My A/C and heating system does not work. It suddenly stopped working while running.


I had to replace the blower motor resistor....15 bones and a 5 minute fix. The OEM resistor is a piece of junk...the replacement part is much more robust...I would try this first. It is located under the passenger side dash as an access panel into the air plenum...hope this helps!

Aug 26, 2009 | Dodge Dakota Cars & Trucks

5 Answers

Blower not blowing


can you hear the fan working on all speeds?

Sep 22, 2008 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Pontiac Grand Prix Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...