Question about 2000 Jeep Grand Cherokee

2 Answers

Rear wiper wasn't working so I replaced it and it still doesn't work, what else should I check? 2000 Jeep Grand Cherokee Laredo

Posted by on

  • krispie1017 Oct 03, 2010

    My rear wiper wasn't working at all, so I just replaced the motor and it still doesn't work. What else can I try to do to fix it? The fluid button works for the rear window but not the wiper.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The wiper didn't work as it didn't operate? You replaced the wiper motor?

Posted on Oct 03, 2010

  • TJsJGC Oct 26, 2010

    I have a similar situation with my 98 JGC, rear wiper didn't work, replaced the motor still doesn't work, the rear window fluid button does work, checked all the fuses. What else is there to check?

  • Greg Potts Mar 08, 2011

    Did you ever figure it out?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

What was wrong i have the same issue

Posted on Feb 25, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 jeep grand cherokee rear wiper not working.replaced motor and fuse is good


join a grand cherokee forum by googleing it and post this and all future questions there

Feb 04, 2013 | 1999 Jeep Grand Cherokee

1 Answer

How do you troubleshoot 2000 Jeep Grand Cherokee Laredo front wiper blade


Check your manual for wiper fuse & relays location.You can inspect fuses visually...hope this helps

Dec 29, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My rear wiper does not work i replace the motor and still does not work why 1997 jeep grand cherokee laredo


Check your fuses by the brake pedal and in by the engine and battery. Black rectangular box. If not see if you have power at the switch

Aug 25, 2011 | 1997 Jeep Grand Cherokee

1 Answer

What fuse is for the power door locks on a 2000 Grand Cherokee Laredo?


Check position F8 15AMP (Lt Blue) for Overhead console, rear wiper, IP lights, rear flipper glass solenoid, POWER LOCKS (click for zoom)...

zjlimited_779.jpg

This is located WJ Junction Block (under dash, left of steering wheel)...

zjlimited_780.jpg

Hope helps (remember to rate this answer).

Mar 03, 2011 | 2000 Jeep Grand Cherokee

1 Answer

How to change rear wiper blade on a 2006 Jeep Grand Cherokee Laredo? I bought a reagular replacement blade but it appears that a special blade is needed. I think the plastic arm piece on the wiper arm...


Hi,
Yes, the wiper is a two piece wiper. Can not be bought at Walmart.
One piece is bolted to the Jeep. The other section has the wiper attachted.
You have to get this at the Jeep dealer or on line. The complete wiper assembly is about $38.00 or $17.00 for the wiper, with the broken tip.
I have a 2006 Grand Cherokee and that happen to me also.
Jeff

Feb 19, 2011 | 2006 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee Laredo Door Locks Dont' Work Correctly


you need to check wiring between lf door and body..peel back rubber boot and pull on wires..you will find 1 or more broken wires..can be repaired

Apr 08, 2009 | 2000 Jeep Grand Cherokee

1 Answer

REAR WIPER.....


check the outside first pull the fluid line where the fluid should be coming out have someone stand there if it comes out there the nozzle is plugged work a pin or needle inside of it to loosen it up if thats the case

Jan 25, 2009 | 2000 Jeep Grand Cherokee

1 Answer

2000 Jeep Cherokee Sport, window washing does not work


the little pump inside the washer fluid reservoir is bad, replace it

Dec 27, 2008 | 2000 Jeep Grand Cherokee

1 Answer

I have a 2000 Jeep Grand Cherokee Laredo, and I am experiencing no turn signals or flashers. I have replaced the fuses, but still have nothing. What do you think the problem could be?


Had similar problem when i bought my 2000 jeep ch. laredo,I had to bend the metal contacts up on the rear lights where u pull out the bulbs,also cleaned them up with sandpaper,only one bulb was not making contact and so none of my rear lights worked prop.buying new light essembly would also work.

Nov 28, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...