Question about 2004 Cadillac Deville

Open Question

Service stabilizer. What does that mean? - 2004 Cadillac Deville

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What I need to know about my 07 buick lacrosse stability services system means


You need a scanner to pull the trouble codes these cars have issues with the traction control/stability control systems.

Nov 07, 2016 | Buick LaCrosse Cars & Trucks

1 Answer

What does it mean when the service stability system light comes on?


It means that your gonna have to take it to the dealer to get it checked .is this a Cadillac product. Stability is keeping the vehicle level at all times and the light is on because the computer either has to low voltage to operate correctly or to high.it needs scanned to find out the real cause of why it came on.

Nov 27, 2015 | 2002 Cadillac Escalade Ext

1 Answer

What does "serv stability sys" mean?


Service stability system.

Aug 05, 2015 | Cars & Trucks

1 Answer

What does it mean when my 2008 trailblazer LT stabilitrac service light comes on?


Service Stability System Message The message center displays the service stability system message when any one of many VSES-disabling DTCs is set. The EBCM sends a serial data message to the IPC requesting this display.
It means there is a problem an till you get it fixed the stability control system is disabled ! ( EBCM ) electronic brake control module Has detected a problem an set a DTC - diagnostic trouble code in it's memory an had the message displayed !
Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) provides added stability during aggressive maneuvers. Yaw rate is the rate of rotation about the vehicle's vertical axis. The VSES is activated when the electronic brake control module (EBCM) determines that the desired yaw rate does not match the actual yaw rate as measured by the yaw rate sensor.
The desired yaw rate is calculated by the EBCM using, primarily, the following inputs.
?€¢
The position of the steering wheel


?€¢
The speed of the vehicle


?€¢
The lateral, or sideways acceleration of the vehicle

The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. When a yaw rate error is detected, the EBCM attempts to correct the vehicle's yaw motion by applying brake pressure to one or more of the wheels. The amount of brake pressure which is applied varies, depending on the correction required. The engine torque may be reduced also, if it is necessary to slow the vehicle while maintaining stability.
VSES activations generally occur in turns during aggressive driving. When braking during VSES activation, the pedal may pulsate. The brake pedal pulsates at a higher frequency during VSES activation than during ABS activation.


It

Jun 19, 2015 | 2008 Chevrolet Trailblazer

1 Answer

Message on dash reads "service stability system"


the stability system has a problem. You will have to have someone read the code to see which component is bad.

Apr 06, 2014 | 2008 Chevrolet Uplander

1 Answer

Stability service 2007 silverado


If you are saying the light is on, then what this means is that a fault has occurred in the stability control system and you need to have the system scanned for codes and then diagnosis run based on the fault codes read from the memory.

Apr 15, 2012 | 2007 Chevrolet Silverado 1500 2WD

2 Answers

THE SERVICE STABILITY SYSTEM LIGHT STAY ON, I HAVE 2002 CADILLAC TRUCK EXT


Whats dose it mean went I have my service stability system light on and it dosent trun off .. I have a Cadillac escalade truck 02 All wheel drive hope some one could help me.......

Oct 02, 2010 | 2002 Cadillac Escalade Ext

3 Answers

The service stability system light came on in my cadillac deville 2002.what do i have to fix on the car?


My Service Stability System Message along with the (ABS) Brake Light lit up on my dash, what can i do to fix it...Or what does this mean ?

Mar 04, 2010 | 2002 Cadillac Deville

2 Answers

Service ride and service stability what does that mean?


this means that you have a fault with your stability control system. the stability control is designed to prevent a rollover it detects body roll when you are driving the ride control is the air suspension sytem this keeps ride hieght the same based on how wieght is in the vehicle. check the links that connect the switches to the suspension you may have one dissconnected (these links wear out over time you night have to replace them) there is one on each wheel postion if you need anything else let me know

Jun 02, 2009 | 2003 GMC Yukon Denali

Not finding what you are looking for?
2004 Cadillac Deville Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...