Question about 1996 Ford Explorer

1 Answer

Where is the window motor located in my 1996 explorer ? It must need replaced because when I push up or down it just clicks.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Inside the door panel mounted to the door inner sheetmetal. Make sure the "gear" is not stripped or lost teeth/backed off from the window retaining mechanism.

You will see this when you get to the motor behind the door panel...

Posted on Oct 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Ford Explorer driver's window won't roll up


if it was running slow then yes i would say the motor died. to replace you have to take the door panel off not too hard of a job if you have some mechanical abilties. i would look online for the part you can usually get it a lot cheaper than local auto stores

Jul 31, 2012 | Ford Cars & Trucks

1 Answer

Electric window doesn't work


The inner door panel will have to come off. You might want to check a repair manual for the step-by-step procedure.
If it is the motor, just buy a couple of used ones from a junkyard. Only the most diehard tinkerers ever mess with them.
I think you may find that the regulator is the problem. Whatever Ford uses to raise and lower the windows (some use nylon strips that wear bad) may be the problem, not the motors. But, anyway, good luck.

Feb 22, 2012 | 1996 Ford Explorer

1 Answer

1996 nissan pathfinder driver side window won't go up and down


does it click or grind when pushing window button if so the window lift track may need replaced, if there are no sounds then disconnect the wires from the lift motor and with the ignition on so power is sent to switch, push button and check wires to 12 volts dc. If no power I would replace the driver side switch after checking the wires for defects. If there is power then I would re-install wires to motor after turning off key and try button again with power on. replace motor if it doesn't work.

Dec 31, 2011 | 1996 Nissan Pathfinder

1 Answer

My 1996 Ford explore xlt and my driver side window will not go up or down on its own. I can force it to roll down and pull/push it up with my hand. When I push the button to roll it up I can hear the...


The window may have come of the track, if you can hear the motor, it's probably fine. If the window moves around freely, it's most likely of track.

Apr 04, 2011 | 1996 Ford Explorer

3 Answers

I have a 1996 lincoln towncar and the trunk isn't closing all the way. from what i have read it is probably the pull down motor???? could you tell me where that is located and what to do to test it to see...


The pull down motor is easy to change open your trunk and look where it latches thats your pull down motor it is probably 3 10 milimeter bolts you will probably have to take out the plastics that cover it up and push back or remove the trunk liner material by it. change your motor and you will have to adjust the motor by lightly snugging the bolts and closing the trunk till it is in the right position then tighten bolts and reinstale liner

Feb 28, 2011 | 1996 Lincoln Town Car

1 Answer

1996 honda Accord drivers window stuck down


If you here a click when you push the switch up or down, then it could be your window regulator (motor). To change remove door panel, there should be 3 bolts holding regulator to door frame and 2 bolts connecting regulator arm to window.

Nov 17, 2009 | 1996 Honda Accord

2 Answers

Window help


Sounds like the gear drive in the small electric motor that moves the window up and down has broken. You will need to replace the electric motor. You can't just buy the gear for it unfortunately.

Aug 30, 2009 | 1995 Ford Explorer

1 Answer

Windows in 1993 Explorer, motor runs but windows don't go up or D


The gears in the motors are stripped. You will need gear kits that you can purchase at a local auto parts store. Good luck.

Jun 07, 2009 | 1996 Ford Explorer

2 Answers

Passenger elect window won't work


It likely has a bad window regulator.

Apr 05, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

How do you adjust the w/wiper stops on 96 explorer


Stop is located inside the wiper motor. Non serviceable part must replace motor assembly.

Mar 29, 2009 | 1996 Ford Explorer

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...