Question about 2004 Dodge Durango
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It seems that because the diagram for the fuse codes aren't located in the owners manual, it would be a dealer item only. One possible solution is to buy an assortment of fuses.. maybe (15) switch them out 1 by one.
Posted on Mar 26, 2009
If your blower only worked on high before it quit, or didnt work on high before it quit,
You probably have a faulty blower motor resistor assembly. The part number is 04885635ab If you look on the bottom of the motor housing on the passenger side (about where the passenger toes would point) you will see a wire harness that is a long oval in shape and has 5 or 6 wires in it. You will need a 7 or 8mm 1/4 inch drive socket with a u-joint attachment. on the firewall side of the connector, there is a sliding lock that keeps the connector on the plug. you will have to slide the lock toward the drivers side and the squeeze a small blak tab to pull the connector off of the plug. Once the connector is off, use the socket to remove the 2 screws. It will drop right down once the screws are removed. Once it is removed, it looks like a 2 inch by 3 inch by 16th of an inch thick piece of metal with a plug on it. The resistor pack dissipates ALOT of heat so do not take it out until the truck has been off for 30 minutes or so. I priced the part at a dealership for $12.77
Posted on Aug 04, 2009
If the fuse blows when you start the car their is a bare wire somewhere in the wiring system that is grounding out when power goes through the system. Thier is a possibility of it being something else that is on the same fuse. You will have to trace the wires to find out what and where it is exposed. Your switches should be tested also. The switch that turns the light on manually and the one located in the door jam itself that turns the light on when opening the door. You should bring your car to a mechanic who is qualified in electrical dianosis. I hope this helped you out. good luck..... It would be appreciatted if you could rate my answer. tThanks....MIKE-
Posted on Aug 25, 2009
Tips for a great answer:
Sep 01, 2014 | 2004 Dodge Durango
Sep 26, 2012 | 2004 Dodge Durango
Aug 12, 2017 | 2002 Dodge Durango
Nov 18, 2017 | 2004 Dodge Durango
Jul 29, 2010 | 1999 Dodge Durango
Mar 27, 2009 | 2004 Dodge Durango
Mar 26, 2009 | 2004 Dodge Durango
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: