Question about 2002 Hyundai Accent
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hiya if the rear lights are remaining on ? with no ignition it will be the brake lights staying on this is easily remendied/ checked by trypulling the brake pedal up by hand and see if lights go off ? if so then you will need to adjust the b/light switch which is positioned adjacent to pedal and can be screwed inwards towards the pedal untill the plunger on switch is pushed into the switch which puts lights off ensure pedal is fully up then adjust switch reconnect the wire/plug and press pedal slightly to ensure b/lights operate ok and then go off with pedal released ? on hyundai the brakelights do not req ignition on to operate hence more likely problem is as above good luck
Posted on Oct 11, 2008
SOURCE: My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some
replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.
Posted on May 26, 2009
SOURCE: rear window break light
You either have a 'single filament' bulb installed in a 'dual filament' brake lamp socket ... OR .. you have a 'dual filament' bulb short circuited internally. Check your rear brake lamp bulbs (supposed to be 'dual filament' - two contacts on their bottoms). When you step on the brake pedal, do your dash lights LIGHT UP? A 'cross circuit' exists between brake lamp circuit and parking lamps circuit.
Posted on Jun 06, 2009
Tips for a great answer:
Mar 03, 2015 | 1998 Toyota Camry
Jul 02, 2012 | 1993 Toyota Camry
Aug 08, 2011 | 1998 Honda Accord
Jun 22, 2010 | 2003 Chevrolet Tahoe
Jan 20, 2010 | 1996 Chevrolet S-10 Pickup
Jul 19, 2009 | 2002 Hyundai Accent
Jul 02, 2009 | 1999 Pontiac Grand Am GT
Jun 10, 2009 | 2005 Dodge Neon
May 22, 2009 | 1999 Honda Accord
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: