Question about 1991 Toyota Camry

1 Answer

No fuel caming to injecters - 1991 Toyota Camry

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,122 Answers

Think you should check the fuel pump and the filter. Fuel pump pressure should be around 3.5 bar with engine at idle. It would be better for you to have this checked at your repair shop as it requires special equipment. Regards Johngee

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my 2005 Dodge Grand Caravan have a carburetor


No, it is fuel injected, one injector per cylinder. Automakers stopped using carburetors when fuel injection came about-during late '80's.

Mar 10, 2017 | Dodge Grand Caravan Cars & Trucks

4 Answers

1999 BMW


you have to get the fuel pump checked.

Jul 08, 2008 | 1997 BMW 328

1 Answer

How do you install a 1996 chrysler concorde fuel pump


Almost all fuel pumps have been in the fuel tank
for the last 25 years or more, since fuel injection
came out

I would suggest you go to You Tube Video to
watch the procedure

The fuel tank has to be removed & pump comes
out the top

Definitely not a home repair job

Mar 05, 2013 | Chrysler Concorde Cars & Trucks

1 Answer

I have a 04 expedition the engine light came on the code read po171 and po174 it die out when I'm at a red light but cranks back up missing bad when it warms up


P0171 - Fuel Injection System Too Lean Bank 1
Possible Causes:
- Intake air leaks
- Front Heated oxygen sensor may be faulty
- Injectors may be faulty
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Mass air flow sensor may be faulty
- Incorrect PCV hose connection

P0174 - Fuel Injection System Too Lean Bank 2
Possible Causes:
- Intake air leaks
- Front Heated oxygen sensor may be faulty
- Injectors may be faulty
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Mass air flow sensor may be faulty
- Incorrect PCV hose connection

Jan 14, 2011 | 1998 Ford Expedition

1 Answer

My check engine came on so i had a diagnostic test ran on it. came back as a bad 02 sensor. i replace it but car seems still hesitant when i go to accelrate like its not getn gas. should i get a fuel...


If the check engine lite doesnt come back on and no other codes, i would try the cleaner in the gas tank first, there are alot of great prduct to add in with your gas.Try that first before you get a fuel injection cleaning, and maybe change the fuel filter also.

Oct 13, 2010 | 1996 Saturn SL

1 Answer

Starts over will start (feathering throttle) when this is done,


PROBLEM COULD BE THE DIFFERENTIAL PRESSURE REGULATOR.AND THE POTENTIOMETER. GO TO AUTO ZONE OR ADVANCE AUTO PARTS. BUY THE FUEL INJECTION MANUAL.LOOK UP THE CIS - E MOTRONIC SYSTEMS.YOUR PROBLEM IS IN THE FUEL DIFFERENTIAL PRESSURE REGULATOR.

Jun 21, 2010 | 1993 Mercedes-Benz E-Class

1 Answer

Where is the ful pressure relay switch


There is no fuel pressure relay, there is a fuel pressure regulator sit on the your throttle body if it's fuel injection, that year came with carb. or injector's.

May 11, 2010 | 1987 Ford Tempo

1 Answer

Identifying a replaced engine in Isuzu Trooper II 1988


It should be on the side of the block 4ZE1 would indicate a 2.6L and yes a 1988 came with this engine with fuel injection.

Sep 08, 2009 | 1988 Isuzu Trooper 2 Door

1 Answer

Water coming out of stem valve on top of intake on 86 corvette


If it was water that came from the valve, and If you can identify the stem valve as a valve on the fuel injection rail or line, then yes , you have water in your gas, and no, it is not normal for water to come out of this valve. If the valve is , in fact, connected to the fuel injection system, it is likely the test valve where a pressure gage is hook up to test the pressure of the fuel going into the fuel injection.
Depending on just how much water is in the system, try several treatments of dry gas, or you just may have to have the fuel tank drained.
Good Luck!

Jul 30, 2009 | 1986 Chevrolet Corvette

4 Answers

Renault megane 1.5dci injection fault


i have a 1.5 dci 2005 renault megane and it will not start it was running fine then injection fault came up on dash bored ive changed the injectors and the fuel filter what,
what could be the problem

Sep 25, 2008 | 2005 Renault 181

Not finding what you are looking for?
1991 Toyota Camry Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...