Question about 2004 BMW 3 Series

3 Answers

2000 328ci got a new key and it needs to be activated to the car ,whats the steps fpr that sync?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 510 Answers

Enter vehicle,make sure all doors,windows are shut
Use first key,switch ignition on and off
Remove key PRESS AND HOLD UNLOCK BUTTON
PRESS LOCK BUTTON 3 TIMES,RELEASE UNLOCK BUTTON
Central locking will activate
SECOND KEY, DO NOT INSERT IN IGNITION
Within 30 seconds press and hold unlock press lock 3 times release unlock button

Posted on Oct 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • BMW Master
  • 2,122 Answers

You'll need to go to an agent and have them encode the key to the car! Regards Johngee

Posted on Oct 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Take car and key to a dealer.

Posted on Oct 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I bought a used key from another ml 320 to use as a second key. Can it be reprogrammed to my ml 320?


HAHAHA surely you know a key from another car will not work in yours unless it is cut to properly fit and turn your ignition

Dec 21, 2015 | Cars & Trucks

1 Answer

No funktional Keys, Immobilizer active, what to do???


try a different dealer if there is one locally .

Sep 01, 2015 | Chrysler Cars & Trucks

1 Answer

1998 BMW 318I KEY REMOTE NOT WORKING, HAS NEW BATTERY IT LITES UP BUT DOES NOT AMS ALARM OR UN/LOCK OR LOCK DOORS?


If you have two keys and one does not work, you need to re-sync the keys to the car. If neither key works, then you might have a problem with the electronics. Check on line for the instructions to re-sync the keys

Oct 03, 2014 | 1998 BMW 318i

2 Answers

I replaced ignition switch and cylinder now car starts but shuts down after a few seconds


does a security light flash on the dash if so the anti-theft has activated and will have to be reset, synced to the BCM if I remember I think you have to use the same colour key for things to work.

Sep 18, 2014 | 2001 Dodge Grand Caravan

1 Answer

Rpms will jump to 2500 and stay between 2000 and 2500rpms.


Is your car a V6 or a 4cyl engine? I have a ton of experiance with the Probe GT V6. So all the following info is for the V6 model ONLY!
First Is your Check Engine Light on? If so Pull the Engine Codes. It is easy to the pull the engine trouble codes on this car. All you need is a paper clip or a piece of wire. Here is a link to a website that will tell you how to check the engine codes and will give you what each code means. http://www.probe-mx6.com/tech.html . After you pull the codes that will point you in the right direction. There are too many factors without knowing more information that could be part of your problem. If you post your Engine Trouble codes i can be of more assistance. But a it sounds like you may have a bad fuel pressure regulator(FPR). A quick way to check your FPR is to start your car and let it run at idle. Than pull the Vacuum hose off the FPR nipple. Now take your finger and rub it against the FPR nipple and see if you can smell fuel or see fuel coming out of the nipple. If there is a strong fuel smell on your finger than the FPR may be bad. Than let the car idle and with the vacuum hose still disconnected, watch the FPR nipple for 5 to 10 minutes and see if any fuel starts to come out the the nipple. If fuel starts to drip or shoot out of the FPR than it is definatly bad and you need to replace it.

Feb 03, 2013 | 1993 Ford Probe

1 Answer

88 ranger 2.3L EFI NEW tank,low and high pumps,both filters, (FPR). will not hold fuel pressure and will not start


Check the fuel pressure regulator on the end of the injector rail (on the engine) This is controlled by manifold vacuum and may be faulty.

Nov 15, 2012 | Cars & Trucks

1 Answer

Hi, When i press the botton on the key to unlock my bwm nothing happen, i always have to open manually. how to i activate the cental locking system. Because i bought new batteries for the key


It depends what model BMW you have you may have to recode the key or re-sync with the car. Some models require you to push the buttons whilst key is in the ignition on acc.

Nov 28, 2010 | BMW 318 Cars & Trucks

2 Answers

My keyless remote stop working & i tryed the step and it only work once. Please help


my keyless remote stop working,tried the step still no luck what to do next.

May 14, 2010 | 2001 Mercedes-Benz M-Class

Not finding what you are looking for?
2004 BMW 3 Series Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...