Question about 2000 Saturn SL

2 Answers

Warning light its like the highbeam light but its green..it comes on when the car is not in park..looks kinda like a green jellyfish..whats it for?

Posted by on

2 Answers

The light is a Daytime Running Light indicator light. I comes on whenever the DRL are on. (DRL uses the high beam lamps) The DRL will turn off when the parking brake is set, or when the headlights are turned on. Have someone sit in the car with the engine running and cycle both the parking brake and headlights. You should see the DRL's turn on and off as the others are cycled. The indicator lets you know the system working, if it goes out, you probably have a burned out headlamp.

Posted on Jun 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2000 saturn sl2 & noticed what i think you mean when i bot my saturn. since parking lights always come on, it's connected to them. my 'jellyfish' light goes off when i turn on regular headlights

Posted on Jun 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The spot for brakes on the dashboard has an IP lite up on it. what does that mean?


CHECK OR HAVE SOMEONE CHECK BRAKE FLUID LEVEL, BE SURE PARKING BRAKE IS NOT ON!

Jan 22, 2016 | Cars & Trucks

1 Answer

All lights work except the head lights. Turn, Single, ect. Work. With head lights on Park, Day drive lights work. The only thing that does not work is the head lights.


What is the vehicle? Does the dimmer switch click and switch to highbeams, do the highbeams come on when you flash them

Oct 11, 2015 | Cars & Trucks

1 Answer

Light with exclamation pt. is on dash warning


It's the brake system warning light, comes on when the parking brake is set. If the parking brake is fully depressed then look for low brake fluid level in the reservoir. Otherwise get the car to a garage and the sooner the better.

Sep 16, 2011 | Mazda Tribute Cars & Trucks

1 Answer

On my 2008 ford escape, there is a light on my dashboard that keeps coming on. it looks like a box with an exclamation mark in the middle. i dont know what that means. im wondering if i need a tune up or...


Brake warning light.

If the light is on all the time, it could mean you simply forgot to release the parking (emergency) brake. The brake warning light remains on when the brake is set as a reminder. If the brake warning light remains on when the parking brake is released, then something is amiss.
In some cases, the brake warning light may remain on if the switch on the parking brake pedal or lever is misadjusted. Nothing is wrong with the brakes and a simple adjustment should fix the problem.
If the brake warning light comes on when you apply the brakes, or is on continuously, it means that hydraulic pressure has been lost in one side of the brake system or that the fluid level in the master cylinder is dangerously low (due to a leak somewhere in the brake system). In either case, the fluid level in the master cylinder should be checked. Adding brake fluid to the master cylinder reservoir may temporarily solve the problem. But if there's a leak, the new fluid will soon be lost and the warning light will come back on.

http://autos.yahoo.com/maintain/repairqa/warning_lights/ques010_0.html

Aug 06, 2011 | 2008 Ford Escape

1 Answer

I parked my volkwagen jetta 97 manual transmission the other day, came back and it wouldn't start. It clicks but it will not start. The safe mode on the radio is on and all the lights come on. I tried jump...


This is the symptoms of a bad starter. The brushes in the starter motor become warn and will not turn the motor. Some folks tap on the starter with a hammer and try again as a test. If tapping on the starter gets it to start it usually indicates their is a dead spot in the starter. Replacement is not difficult.
I hope this helps. God Bless.

Apr 07, 2011 | 1999 Volkswagen Jetta

1 Answer

My problem is when I turn on the headlights, the parking lights comes but not the headlights, but when I hold the turn signal switch / highbeam to the rear the driving lights comes on but I will have to...


you might just have two bad low beam headlights, I have seen it before. Only other problem would be the switch that turns on the headlights is bad. Best way is to Test power going into the headlight when the low beams are turned on to rule out the switch.

Oct 10, 2010 | 1983 Oldsmobile Cutlass Supreme

1 Answer

1999 Audi A4 warning lights


look like it's your brake warning light, have some one check your brake pads, brake fluid and parking brakes

Mar 29, 2010 | 1999 Audi A4

1 Answer

2003 AVALANCHE DRIVER SIDE HIGHBEAM LIGHT BLEW. WHAT IS THE BEST WAY TO REPLACE THE LIGHT BULB


Ok, They kinda hid this one, but start by Lifting the hood. Look at the radiator support just over the headlight. You should see two pins, shaped like an "L". twist those pins out so you can get a hold of them, and pull them out. The headlight assembly should then pull out, and you will be able to access the back of the assembly to disconnect the wire, and for removal of the bulb.

Feb 19, 2010 | 2003 Chevrolet Avalanche

3 Answers

My Isuzu Rodeo O2 sensor light is on and I would like to fix the problem.Could anyone tell me where is that sensor located at?


There's also a circuit on the back of the instrument panel that causes the O2 lamp to light every so many miles- I guess its a way to remind you to change the sensor. To re-set the O2 warning circuit, you must remove the instrument panel and locate a set screw on the back of the green circuit board. Remove the screw from the receptacle it's in and relocate it to the receptacle next to it. This will re-set the warning light.

May 08, 2009 | 1993 Isuzu Rodeo

Not finding what you are looking for?
2000 Saturn SL Logo

422 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...