Question about Buick LeSabre

1 Answer

How do I loosen the clamp on the bypass hose for a 1995 Buick LeSabre Custom without moving the alternator out of the way? I can't get a screwdriver or wrench in the narrow opening. Any hints? Thanks.

Posted by on

1 Answer

Remove the alternator.

Posted on Oct 03, 2010

  • zasbury51 Oct 03, 2010

    So, that's the only way? What about cutting the bad end of the hose and installing a plastic connector between the old end of the hose and the new one? Thanks again. You're awesome.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just put a bypass hose on my 91 Buick lasbre and turn on the heat and started seeing steam come out the vents and now its steam on my windshield


Sounds like you have a bad heater core or you have antifreeze leaking in the into the heater box. Maybe a loose clamp on the bypass hose or maybe you damaged the heater core tube when you installed or removed the bypass hose and now it is not sealing properly.

Dec 18, 2016 | 1991 Buick LeSabre

1 Answer

Where is bypass hose


The coolant bypass hose is located on the passenger's side of the engine compartment right behind the alternator. It is a small black rubber hose that is about 8" to 10" long. It is connected to the lower intake manifold.

Jan 13, 2012 | 1994 Buick LeSabre

1 Answer

What size fuses do I need for a 1995 buick lesabre custom?


I suggest check in this link the 1995-Buick-Lesabre owners manual to put the correct fuse in each circuit. Be careful with this.

Hope helps (remember to rate this free answer).

Sep 09, 2011 | 1995 Buick LeSabre

2 Answers

Have water leak at 90* hose from mid-block to belt tensioner. how to fix leak where hose goes into block--3.8L


There is a plastic nipple that screws into the intake manifold and that usually breaks. you will need to remove the alternator to get access to the part

Jan 31, 2010 | 1997 Buick LeSabre

1 Answer

Replacing A Heater Hose


Drain coolant from the radiator. Loosen the hose clamps at both ends of the hose and slide them off back. Gently remove the hose from the metal nipples. A screwdriver can help loosen the grip which the hose on the nipples, or you can cut the rubber. Place the hose clamps on the new hose in positions which are away from the clamping areas. Install the new hose and slide the hose clamps into position and tighten. Refill cooling system with coolant.

Nov 01, 2009 | 2002 Buick LeSabre

1 Answer

1995 buick lesabre custom. has a new fuel


even if you have preasure in the line that does not mean you have fuel going into the engine. you should check the injectors to see if they are spraying and if not you need to check the injector pulse to find out if the PCM is sending the signal to them to spray. to check injector pulse you will need a noide light to test the pulse it the light lights up you have pulse, but easy way to check is pull an injector and turn the engine over see if it sprays.

Aug 24, 2009 | 1995 Buick LeSabre

1 Answer

Hose from water pump to intake manifold above and behind water pu


this is a water pump bypass hose connector to the manifold, take the broken piece to a parts store and show it to them, it should have the threads still broken off in the manifold so explain that. To remove the broken piece ask for a EZ OUT to fit the piece you took to the store.
It is common for these to become brittle and break off but it is a simple fix.

Feb 17, 2009 | 1993 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...