Question about 2000 Chrysler Town & Country

1 Answer

Check engine light #4 miss fire replaced plug and wire still get same could could it be the coil pack

Posted by on

Ad

1 Answer

Spark Plugs never fail to fire,it would be a, once in a lifetime, if you find one.
You never change any part, without knowing what it does,and how to test it
So will it could be anything in the ignition system, I suggest you save your money on parts,and just have it repaired.
No one without the vehicle can guess at the issues your having.
If you perform a specific test and need help to evaluate the results,then get back here

Posted on Oct 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What causes the engine to miss fire on #2 cylinder?


If you shoot me your year I might have the info you need. And - depending on your year - the 94ish years had TWO coil packs for the 4 cylinder - 8 plug wires basically. When any of the leads of either of those coil packs goes out - youre going to experience a miss condition. If it's the v6 - you've got a cam sensor that can cause that type of action - and have you checked your throttle positioning sensor? If that goes out - the ecu will get mixed signals and can act like that as well. If you can tell me the year I'll see if I got the info you need. All the best.

Jan 24, 2016 | Ford Ranger Cars & Trucks

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

1 Answer

Dead miss on one cylinder 99 sl2


A quick way to check the single coil pack if you know for sure which cylinder is miss firing and its setting a code you can swap the coil pack to another cylinder and see if the miss changes from one cylinder to another. If it travels to where you moved the coil then the coil is bad,if not you have other problems.

Mar 16, 2014 | Saturn Cars & Trucks

2 Answers

05 Ford Escape, coils #3 & #4 not firing. We've replaced the battery, spark plugs, alternator, coil packs, & pcm. Had pcm reflashed. Garage said it had to be coil packs, but just replaced coil packs 3


Check engine light on ? Code's ? What engine ? 2.3 l 4cylinder or 3.ol v-6 This vehicle has coil on plug ignition system , not coil packs ! a coil per cylinder . If new coils an still has no spark , has no B+ voltage to the coil or the PCM isn't controlling them . Without testing i'd only be guessing as to the problem .If the repair shop you had it to can only say it had to be the coils , I'd find another shop to take it to !
Autolite Coil on Plug Ignition troubleshooting

Jun 22, 2017 | Cars & Trucks

2 Answers

Squirel ate through wire harness connector on coil pack. I have found new connector with generic black 4 wire harness, but need to know the correct order to connect to old (multi-colored) wires leading...


Check the right wiring diagram connections... 2002 Mercury Cougar 2.0 liter DOHC L4 VIN "3"

zjlimited_204.gif

Also, I find few diagrams about Igniotn System...

zjlimited_730.jpg

Fig. Engine Ignition, Page 01 (2002, System overview)



zjlimited_731.jpg


Fig. Engine Ignition, Page 02 (2002, Duratec-VE)



zjlimited_732.jpg


Fig. Engine Ignition, Page 03 (2002, ZETEC-VCT)





Hope helps.

Feb 22, 2011 | 2002 Mercury Cougar

1 Answer

MISFIRE ON CYLINDER 4 AND 6 WITH AN ENGINE LIGHT ON


Check the coil packs on the plug if equipped with that type, or the coil packs at the end of the spark plug wires, if so equipped.

Also, check that the fuel injectors are firing on all 8 cylinders.

Definitely, check out what other codes are stored in the computer besides a missing condition.

I have a 1999 Expedition that had a miss on a cylinder, and it turned out to be a bad coil pack. You have 2 cylinders missing, so I would check each cylinder for good spark, or replace the coil packs as necessary to see if that resolves the problem.

Good luck on this repair.

Dec 31, 2010 | 1997 Ford Expedition

1 Answer

2003 ford taurus - replaced fuel filter & fuel pump - runs great then starts chugging, RPM's drop, pull over, turn it off and wait about 1 or two minutes, then runs great, only in the heat of...


is the car missing when driving? 2000 and on has coil over plug's there are no wires. Is the check engine light on? if so go to an Auto Zone parts store or one that will scan the car computer for free and get the codes out to pin point the problem. Sounds like the cars miss firing. it could be more than one coil and or plug going bad. Did you replace any coil packs? Bad coil packs are 90% of all miss fires on todays cars and trucks.

Aug 09, 2010 | 2003 Ford Taurus

1 Answer

Knocking sounds coming from either the camshaft or timing belt area the the check engine light is on and throwing a code for a miss fire on cylinder 6 does anyone have any ideas?


a miss fire would mean a bad coil for #6
if you have a coil pack all with all 6 plug wires need to replace it.
if your coil pack has 3 or 4 coils need to replace just the one with # 6 plug
wire in it. most have 2 plugs per coil.

Jun 23, 2010 | 2005 Hyundai Tucson

1 Answer

Truck not firing properly front coil pack not firing at all.


if this truck has an o2 sensor i would replace that and also make sure the cat-converter is not plugged,this would give you your powerloss and egr code,next is your coil,this may be caused by the computer or your crank sensor,look at the tone ring that the crank sensor uses and make sure its not missing teeth or broken,also check all your fuses.

Jun 12, 2010 | 1994 Ford Ranger Supercab

2 Answers

My 96 Saturn sc2 wont turn over or start.


Was there oil/coolant in cylinders when they were pulled?

Jun 22, 2009 | 1992 Saturn SL2

Not finding what you are looking for?
2000 Chrysler Town & Country Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...