Question about 1981 Ford F 100

1 Answer

Have a 83 ford f100 and im putting a 3 speed shifter on the floor but missing the top left bolt for shifter on tranny what size is the bolt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 480 Answers

Heres the funny thing i had the same truck and i found out that if your missing a bolt try fining any random bolt and stick that baby in there it's a ford thing.

Posted on Oct 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Model A with a 1984 Ford F100 4-speed manual (top loader) transmission it it. Someone had welded a Model A shifter on to the Ford shifter and it broke off. Can it be replaced without taking the...


If the 4 speed has a top plate you may be able to remove the plate and pull the shifter straight up. You may want to identify the transmission and look at a service manual first.

Jan 25, 2014 | Cars & Trucks

1 Answer

I just purchased a 1964 1\2 mustang 200cu(v6), but the problem is my shift linkage is missing some bolts. I need the size of the bolts! Anybody?


Manual Transmission three speed shifter bolts to extension housing they take either 5/16 X 18 and 3/4 to 1 inches long or 3/8 X 16 3/4 to 1 inches long

Nov 09, 2013 | Cars & Trucks

2 Answers

I can't figure out how to remove the shifter from my 1991 ford f150, 4.9 liter manual transmission.


Remove the rubber mat or carpet from the floor around the shift tower. This will expose a stamped steel plate that you can remove to get access to the top plate of the transmission. Place the transmission in neutral and remove the bolts securing the top cover to the tranny. After removing the bolts you may need to use a rubber mallot to bump loose the cover. Pick the cover straight up and out. After removal cover the hole with a rag or better yet fabricate a cover from a thin piece of plywood that you can bolt back in place with a couple of bolts to prevent dirt and foreign particle from entering the tranny. When you remove the top cover and see the forks hanging from the underside don't worry. When you place the cover back onto the tranny just line up the shift forks to the slots they drop into on the gears. Piece of cake.

May 11, 2011 | Ford F-150 Cars & Trucks

1 Answer

Clutch stays on floor only goes into 2nd and 4th clutch sticks and suddenly pops out and stalls car mount that holds motor and tranny are the same im thinking bolt to frame missing dont know size bolt to...


Could be that you have a faulty clutch slave or master cylinder. Check for fluid levels and leaks. If the clutch is not working correctly even the shifter goes into gears, it look like its not engaging all the and just popping out.

Mar 07, 2011 | 1991 Nissan Sentra 2 Door

1 Answer

How dose the shifter come off tranny of an 1986


On the top of the gear box remove the bolts that hold down the shifter plate.Pull up on the shifter and it come off,stuff a rag inside the hole to keep debri out.

Feb 01, 2010 | 2004 Ford F150

1 Answer

I have a 1987 ford ranger 4x4 and im trying to figure out how to remove the shifter linkage from the tranny to drop the tranny


Hi danielh_04,
There are two different manual transmissions for that year but both processes are about the same. You need to remove the screws from the shifter boot and pull it back to gain access to the top of the transmission through the floor board. You should see a cover with bolts. Remove the bolts and pull the cover off. Then you want to carefully pull up on the shifter. The lever,shim and the bushing should come out. After you get it removed,you can cover the hole with a rag and drop the transmission. Good luck,if you need anything else,let me know,Chuck.

Dec 23, 2009 | 1991 Ford Ranger Supercab

1 Answer

Need to know what size bolts bolt together the bellhousing.


it is a 7/16 ths size bolt about two and a half inches long. i just pulled mine saturday

Feb 26, 2009 | 1983 Ford Mustang Hatchback

1 Answer

How to repair 66 ford f100 steering column


contact ford. for parts and diagram

Oct 24, 2008 | 1981 Ford F 100

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...