Question about 1995 Lexus ES 300
You will have some damage to the wiring somewhere, check around the damage area.
Posted on Jun 01, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just changed the cabin filter of my ES300. I found the instructions on the manual, under airconditioning and audio. It's pretty easy to do. I bought the filter from Kragen's for $21.95.
Posted on Mar 27, 2009
Hi, try loosening the catch on the trunk lid but do not remove it and the lock mechanism, close the trunk lid but not fully, then pull the backseats down and climb into the trunk. Adjust the lock and latch until they meet up and lock together ( This will take some time and patience is essential). Fasten the Catch and Lock back up. Then retry opening and closing, if it still doesnt fit just do the same again, just needs a bit of adjustment.
hope this helps. jonno
Posted on Apr 21, 2009
My Son has a 95 es300, the amp for it is located under the front passenger seat. The easiest way to access it is to remove the 4 bolts holding the seat down, and remove the seat. Takes about 5 minutes
Posted on Jul 24, 2009
Found blowen altanator fuse which is located under the hood fuse box.
its the box type fuse white 120 amps. To remove there are two screws
that hold it in placse.
Posted on Sep 01, 2009
Tips for a great answer:
Dec 19, 2015 | Lexus Cars & Trucks
Open the hood of the ES300 and prop it open.
Look at the headlight assembly from the top down. Depending on your model year, there may be a plastic panel covering the top of the headlight assembly. If this is present, remove it by lifting all of the plastic clips around the edges and lifting it off.
Locate the three bolts that hold the headlight assembly in place. Two of the bolts are in the left and right rear corners of the assembly, and the third is on the side bordering the outside edge of the car, screwed into the back of the fender panel. Remove all of these bolts with a small adjustable wrench. Though they appear to be designed to be removed with a screwdriver, the way they're arranged makes it almost impossible to remove them with one.
Slide the entire headlight assembly forward a few inches so that you can reach the back of it.
Unscrew the plastic bulb socket assembly. This is the large, round component located right in the middle of the back of the main assembly. Turn it about a quarter turn to the left and you can pull it away from the main assembly. If you're replacing both the bulb and the main assembly, see the next section on how to replace the bulb, then resume this process
Jun 05, 2012 | 2000 Lexus ES 300
Feb 12, 2011 | 1995 Lexus ES 300
Oct 20, 2010 | 1995 Lexus ES 300
May 31, 2010 | 1995 Lexus ES 300
Oct 08, 2009 | 1995 Lexus ES 300
Jul 26, 2009 | Lexus ES 300 Cars & Trucks
May 29, 2009 | 1995 Lexus ES 300
Apr 20, 2009 | Lexus ES 300 Cars & Trucks
Jan 03, 2009 | 1995 Lexus GS 300
Jul 25, 2014 | 1995 Lexus ES 300
32 people viewed this question
Usually answered in minutes!