Question about 1984 GMC VanDura

Open Question

How do you replace ignition switch on 1978 GMC Vandura

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: GMC Vandura 1983 6.2 litre diesel automatic transmission oil GMC Vandura 1983 6.2 litre diesel automatic

Your dip stick tube is your fill tube for your transmission . Make sure your transmission oil is at opperating temp before servicing some instructions are written on the dip stick , Use a small funnel , Add a little at a time (cup). Use the proper fluid , check regularly

Posted on May 18, 2008

Ad
  • 59 Answers

SOURCE: 1997 GMC Sierra Ignition Switch Replacement

take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!

Posted on Mar 15, 2009

SOURCE: 1995 gmc sonoma ignition key worn out

You have to remove the stering colum covers and in the ingnition key drum on the side there is a little hole, press the inside pin and pull the key ccylinder out, you can buy on autozone or pep boys.

Posted on Jul 18, 2009

  • 1757 Answers

SOURCE: serpentine belt diagrams 1990 gmc vandura

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1990/make/gmc/model/vandura/1990_gmc_vandura_drive_belt_routing_diagram.htm

Posted on Mar 07, 2010

drsinister69
  • 2317 Answers

SOURCE: 1985 gmc vandura 2500 will not fire when trying

Sounds like you may have problems with the ignition switch. The starter is turning over? But the motor doesn't fire, until you turn the key off?

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of ignition coil relay 1992 gmc g2500 vandura 350


Location of ignition coil relay ??????? Doesn't have a relay for ignition coil . Power for it comes from the ignition switch.

Jul 19, 2017 | GMC Cars & Trucks

2 Answers

I am trying to get my 1985 GMC Vandura 2500 to start, but the steering g wheel is locked and the key won't turn to try and turn it over. What would be a cause of this?


If you vehicle is parked on a slant and the wheels are slightly turned, the pressure from the weight of the car may be forcing you steering wheel to bind. Try tweaking the steering wheel in the same direction that the wheels are turned using your left hand and at the same time try turning the key with your right hand. Tweaking the steering wheel takes the pressure off of the ignition switch. If that doesn't work, try a different key if you have one.

Aug 17, 2015 | GMC Cars & Trucks

1 Answer

93 gmc vandura 3500 box van won't start. I have power, installed new starter and ignition switch, but the starter won't kick.


Some vehicles Red (hot lead) have an inline fuse. Also check for other fuses for the ignition. If you have an alarm system, make sure it is disarmed. That can be done by using the key to open the down some times.

Oct 24, 2013 | 1984 GMC VanDura

1 Answer

Van won't start,rapid clicking heard when key is turned. need help/directions replacing starter relay for gmc vandura 2500, 1991


Check battery connections and battery fuse. Battery may not be large enough for the size of your van

Jan 18, 2013 | GMC Cars & Trucks

1 Answer

1978 GMC Vandura air conditioning belt replacement


I know this is no help really, but I have the part numbers for the belts but no diagram. I only have diagrams for serpentine belts.
Generally, the ac belt is the last one on the crank pulley. You should be able to tell if it goes around a pulley if you have empty pulley grooves.
Most V8 GM engines ran the AC belt around the crank and the water pump, but it depends on where they mounted the ac compressor.
And usually the compressor pivoted to adjust the tension.
If you can look down the groove of the ac clutch pulley and see any empty pulley grooves I would try running the belt in those grooves.
According to my Gates book, the alt belt goes around the crank and fan pulley, and the ac belt does too.

Jul 18, 2012 | GMC Cars & Trucks

1 Answer

How do I replace the lock and key unit in a 1993 GMC Van Dura?


I am not sure which one you are talking about (ignition or door). I can give instructions to either. just have to know which one.

Nov 15, 2010 | 1987 GMC VanDura

1 Answer

Serpentine belt diagrams 1990 gmc vandura


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1990/make/gmc/model/vandura/1990_gmc_vandura_drive_belt_routing_diagram.htm

Jan 23, 2010 | 1987 GMC VanDura

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...