Question about 2004 Isuzu Rodeo

1 Answer

Have 2004 isuzu rodeo 3.5 L 2 wd 82,000 miles ,.. firing order 1L 2R 3L 4R 5L 6R check engine light came on,. diagnostic said misfire on cyl 4,.. had mechanic replace all plugs,. they needed it,.. he chose to switch 2 and 4 as a pre diagnostic measure in case check engine light came back on, and if it said cyl 2 ,.. the problem would be easier to diagnose,.. 2 weeks later check engine light comes back on... at first flashing then turning off, now 24 hrs later it stays on,.. went to autozone,.. their diagnostic says cyl 3 is misfiring... ignition coils are $114 each.. mechanic is only open M-F its saturday, need car for work, have no back up car electrical problem? ignition coils all going bad?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

No. The ignition coils most of the time when you get a misfire, are not the problem. Most of the time it is the plugs, or wires. Usually when a coil goes out then it is out. Or will quit firing when the engine is warm. Then fire again when the engine cools off. Make sure that your plug wires are all seated good. A misfire is not a huge deal. It won't hurt the engine what so ever to misfire a cylinder every once in a while. So it is very safe to drive the Rodeo to work.

Posted on Oct 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Spark plug firing order


Hello Harvey, My information shows firing order of 123456. #1 being passenger's front cylinder and #2 being driver's front cylinder.

Jul 30, 2014 | 1995 Isuzu Rodeo

1 Answer

Good morning, I have a 2004 Isuzu Rodeo in which I have always gotten the proper worker done on time. I'm currently at 90,000 miles and my engine light is on. My truck jerks as if it doesn't want to go...


You have an apparent misfire that has to be troubleshooted correctly. At the mileage you have, you should have changed the plugs, wires (if it has them), cap and rotor (if it has them). Beyond that would take some technical diagnostics.

Aug 14, 2013 | 2004 Isuzu Rodeo

3 Answers

What is the firing order for isuzu rodeo 2002 2.2 lits


Please don't forget to rate! This helps us help you!!! Thanks!!


c17hydro_180.gif

2.2L VIN D engine Firing order: 1-3-4-2 Distributorless ignition system

May 12, 2011 | 2002 Isuzu Rodeo

1 Answer

What is the firing order.Need to replace coil on plug number 7?


looking into the engine compartment of any car the front of the engine to the left is always no 1 cylinder,so...
1l 2r
3l 4r
5l 6r
7l 8r

Jul 09, 2010 | 2000 Toyota Tundra

1 Answer

1999 isuzu rodeo is misfiring aome of the


when a coil goes out the other ones are usually right behind the one that failed ive seen them go out as fast as going around the block luckly the costumer was right there when it happened and he had us replace all eight of them.

May 30, 2010 | 2001 Isuzu Rodeo

1 Answer

Hi i have a vauxhall frontera 2.4 petrol after driving 10 miles plus engine management light flashes and the car seems to misfire


That sounds like an injector fault, try having diagnostic tool pluged in while driving, or get garage to do it.

Apr 27, 2010 | 1994 Isuzu Rodeo

1 Answer

FIring Order of a 2004 Isuzu Rodeo 3.2L Engine


My apologies for the delay....Due to the bad economy the number of questions posted has skyrocketed 50% in the last 4-months.

For 2WD and 4WD it is the same:
For 3.2L:
Firing Order:
1-2-3-4-5-6
Cylinders:
5-------6
3-------4
1-------2
(front of vehicle)
Coil is on the Spark Plug

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 06, 2010 | 2004 Isuzu Rodeo

1 Answer

2004 Isuzu Rodeo 3.5ltr 4X4 hesitation/misfire acceleration


The upper intake gaskets may be leaking. They are made of plastic and metal and will leak air. Do not remove the cover on very top of manifold when changing.

Jul 24, 2009 | Isuzu Rodeo Cars & Trucks

1 Answer

Misfiring Cylinders


spark plugs.... or coils!!!!!!!!!!

Jun 11, 2009 | 2004 Isuzu Rodeo

1 Answer

1997 isuzu rodeo


The firing order for a six cylinder is 1-2-3-4-5-6 distributor rotation-clockwise...cylinders 1-3-5 on drivers side...2-4-6 on passenger side

Dec 18, 2008 | 1997 Isuzu Rodeo

Not finding what you are looking for?
2004 Isuzu Rodeo Logo

Related Topics:

617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...