Question about 2006 Ford Fusion

1 Answer

I have 2006 ford fusion my eng light came on then the little wrench came on and it went into a limp mode with code p2110 I called ford they told me it could be A hundred things.Since times are hard I can't for them to check it out I hope you can help me thanks.

Posted by on

Ad

1 Answer

P2110-Throttle Actuator Control System
Means the motor that opens the throttle plate, on a drive by wire system. Your gas pedal is hooked to nothing,just three more sensors down there,like the Toyota Problems

You should have other codes also

Do not go to Ford,unless you don't want it fixed,
and want to spend a lot.

They will use that code, to install a $600 plus labor ,throttlebody you don't need. It's motor could fail and give you the 2110 code

If you get a COP Ignition Coil,that is really bad,it will spike the PCM,the spike will come back on the TPS Sensor, and the PCM can not adjust fuel,based on the TPS Voltage being off,so it goes into failsafe and you get to drive 6 mph
Problem--bad coil or two

Not many people know this. It is beyond a dealer and the factory service manuals
You go to the auto parts store and buy one coil for $59.00 and install in the cylinder with a PO-301 thru PO-306 code first
The last number is the cyl#
For really bad spiking issues, you disregard the 300 codes and walk the new coil ,until you find the bad one.
You should borrow a code reader from a family member,someone has to own one,with the vehicles we all drive today.

Posted on Oct 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 fusion wrench light


Sometimes the service light puts the car into "limp mode" hence the poor performance. Might need a trip to a mechanic to diagnose the cause because intermittent faults are very hard to find.

Oct 16, 2015 | 2011 Ford Fusion

1 Answer

Need to know what code 2110 ford fusion 2006 se


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection help.png Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mV0SayWu

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

What does 2110 code on 2006 ford fusion mean


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection > Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mUz73ACP

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

How do i fix?


P0122 throttle/pedal position sensor/switch A circuit low input
P0223 throttle/pedal position sensor/switch B circuit high input
P2101 throttle actuator ctrl motor circuit rang/perf
P2104 throttle actuator ctrl sys-forced idle
P2110 throttle actuator ctrl sys-forced limited rpm

Here is the meaning of the codes hope this helps

Sep 20, 2015 | Cars & Trucks

1 Answer

Wrench light comes on car looses power, shut car off restart no issues till later then light comes back on and car looses power


run fault codes to find the reason that the CPU keeps going into limp /shut down mode. Check oil level and water level in the radiator.

Oct 08, 2013 | 2008 Ford Fusion

1 Answer

2006 Ford Freestyle wrench light comes on and goes into limp home mode how do you fix


There is no way to get around a proper repair on a computer controlled transmission, that is wishful thinking. What is the fault code that is memory? Have you even run the system scan yet?

Apr 23, 2012 | 2006 Ford Freestyle

3 Answers

Throttle does not work-wrench light on


Certain emissions parts are covered 8 yr / 80,000 miles (e.g. PCM, ECU, & TCM). I've also read of bad gas caps leading to problems. Have you changed gas caps or added a locking cap that's not Ford approved for this fuel system?

May 01, 2009 | 2006 Ford Fusion

3 Answers

2006 ford fusion "wrench" light


what you have is an intermittent problem... make sure all the fluids are topped up... and refrain from replacing random things in hopes you hit the right one. it gets expensive. you may want to go to autozone and have them read the codes the next time either light comes on. i believe the computer retains the code for three key cycles.

In the mean time if you can't pull any codes to aid in troubleshooting you will have to wait to find out what it is. a cheap thing to try would be to replace the relay that controls the cruise control... usually in a fuse box located in the engine compartment near the battery.

Robert


Jan 13, 2009 | 2006 Ford Fusion

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

1,805 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...