Question about 1990 Nissan Pulsar

1 Answer

Timing belt replacemnt for 1991 Nissan pulsar

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

1. Disconnect battery.2. make sure the engine is at top dead center(TDC).3. take belts off.4. Remove pulleys,except for the camshaft pulley..5. Remove timing belt cover.At this point you should see the timing belt and also the water pump,if it's not external.I suggest while you have access to the water pump that you replace it.6. loosen timing belt tensioner and and finally remove belt.On the camshaft pulley,there should be a notch,making sure the notch is at the top of the pulley. 7. Tighten the timing belt,but not too tight.7. Installation is reverse of removal.

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Looking for a holden astra LD 1989 workshop manual


  • Nissan Pulsar N13 and Holden Astra LD 1987 - 1991 Workshop Manual Repair Manual for Nissan Pulsar N13 Series & Holden Astra LD Series ... N13 and Holden Astra LD 1987 - 1991 Workshop Manual ... 1987, 1988, 1989, 1990 and 1991. Holden Astra LD ...www.automotobookshop.com.au/gregorys-?nissan-pulsar... - Cached
  • Dec 07, 2010 | Nissan Pulsar Cars & Trucks

    1 Answer

    How do you fit a timing belt for a nissan pulsar 1990, were are the bolts to loosen the chain?


    http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

    May 01, 2010 | 1990 Nissan Pulsar

    1 Answer

    Nissan pulsar N13 1991 GL manual htch cutting out even in neutral


    2 things, sounds air related

    1 there is a split in one of your air pipes causing it to take on to much air and cut out.
    2 the air flow meter or air sensor is broke, or may need cleaning.

    Use carb cleaner to clean the sensors and wires.

    Jan 15, 2010 | 1990 Nissan Pulsar

    2 Answers

    Alternator


    1996 Nissan/Datsun Sentra 1.6L SFI DOHC 4cyl

    Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide
    The alternators for Pulsar and Sentra have not changed much over the years. However, the 1987-88 alternators for Pulsar and Sentra have a different internal diode assembly.
    1. Disconnect the negative battery terminal.
    2. Disconnect the 2 lead wires and connector from the alternator.
    3. Loosen the drive belt adjusting bolt and remove the belt.
    4. Unscrew the alternator attaching bolts and remove the alternator from the vehicle.
    To install:
    1. Install the alternator and retaining bolts loosely.
    2. Install the belt and connect the wiring.
    3. Adjust the belt as outlined in . Torque the retaining bolts to 25 ft. lbs. (34 Nm).

    I hope help you with this (rated this help).

    Sep 11, 2009 | 1996 Nissan Sentra

    1 Answer

    1987 nissan pulsar won't start


    YOU GOT THE TIMING OFF ON THE TIMING BELT BY HALF  TURN.                                                    GOOD LUCK!

    May 28, 2009 | 1987 Nissan Pulsar

    2 Answers

    Fitting n13 timing belt


    A 1990 Nissan Pulsar has a timing chain, not a belt. Here is the picture.
    a4e2a04.png

    Mar 14, 2009 | 1990 Nissan Pulsar

    2 Answers

    1991 Nissan Pulsar - stereo security code...??


    most times all codes are a basic number like(12345 or 11111) something in this order give it a try this might work i hope this helps you out have a great day :)

    Nov 21, 2008 | 1990 Nissan Pulsar

    1 Answer

    1996 nissan pulsar


    get underneath your vehicle and look around at the pulleys and you should see a bolt sticking out of one, its about a 12 or 13 mm bolt or larger, just tighten that and your belts will be tightened...hope this helps

    Aug 31, 2008 | 1990 Nissan Pulsar

    Not finding what you are looking for?

    Open Questions:

    See all 1990 Nissan Pulsar Questions

    1990 Nissan Pulsar Logo

    514 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    726 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...