Question about 1999 Dodge Intrepid

1 Answer

How do i change the oil pump in a 2000 dodge intrepid

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

I'm assuming that you are talking about 2.7L, the check this procedure...

Removal & Installation - 2.7L Engines

  1. Drain the engine oil.
  2. Remove or disconnect the following:
    Crankshaft damper Timing chain cover Timing chain Crankshaft sprocket Oil pan Oil pickup tube and O-RING Oil pump

To install:


how do i change the - f24d78a.jpg

Fig. Oil pump mounting bolt locations-2.7L engine

  1. Fill the oil pump rotor cavity with clean engine oil.
  2. Carefully, install the oil pump over the crankshaft and into position.
  3. Install the oil pump mounting bolts and torque to 21 ft. lbs. (28 Nm).
  4. Lubricate the new pickup tube O-ring with clean engine oil and torque the pickup tube mounting bolts to 21 ft. lbs. (28 Nm).
  5. Install or connect the following:
    Oil pan Crankshaft sprocket Timing chain Timing chain cover Crankshaft damper
  6. Fill the engine with clean engine oil.
  7. Start the vehicle, check for leaks and repair if necessary.

Hope helps (remember to rate this).

Posted on Oct 02, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 116 Answers

SOURCE: Need Diagram of water pump on a 1998 Dodge Intrepid 2.7,

the water pump is timing chain driven and to replace it requires serious disassembly of the engine. it is a 13 + hour job and is not for the casual mechanic

Posted on Apr 13, 2009

csmock132
  • 4669 Answers

SOURCE: find location for oil filter for oil filter for dodge intrepid

What engine? 2.7 passenger side on the bottom next to oil pan. 3.2 and 3.5 Drivers side coming off the side of block, near the front under the exhaust manifold.

Posted on Mar 24, 2009

bschilz
  • 2049 Answers

SOURCE: where is cabin air filter 2000 dodge intrepid

The 2000 Dodge Intrepid is not equipped with a cabin air filter.

Posted on Jan 19, 2010

  • 972 Answers

SOURCE: Dodge Intrepid 1996 Water Pump Replacement Needs

a timing belt. the water pump uses it to turn it and you got to take it off to change the pump anyway so you might as well get a new one.also the hydralic timing belt tensioner should be replaced at the same time just to be sure.you will need anti freeze of course as well

Posted on Apr 05, 2010

  • 4102 Answers

SOURCE: 2000 dodge intrepid 3.2 l engine noise and oil light on

Hi, if the oil light comes on when you rev the engine at high revs and also comes on when the engine is warm then this means one of 2 things it either means your oil pump is up the shoot and needs repairing( this is a big job) or it means you have an oil leak and the oil pressure drops when the oil gets thinner due to being warm, so the first thing to do would be to have a good look around the engine for signs of oil leaks, its a good idea to get a big piece of cardboard and place this under your engine when you are parked up then check for signs of oil after it has been standing.
how ever you may not see oil on the floor due to you have a scratch guard under the car where the sump is so the oil my be falling on this and not the floor.

check the oil level if this is low the oil light will come on when warm or when engine is revved due to it being pumped round the engine, so check the level to see if its low.

if the level is ok and you find no leaks then one thing to do first would be to get the oil and oil filter changed and make sure you get the correct oil type for your car to ensure its the right type for your engine.

another problem you could have is a blocked breather from the cam cover to the sump this is an over flow for any oil and air that builds up in the engine you will find this towards the back of the cam cover and its pushed onto the cam cover and it goes down to just above the sump so you could remove this and check for blockage.

but if after changing the oil and filter the light still comes on then the chances are you oil pump is failing and is no longer keeping the oil pressure at normal running power, this will be bad for your car and can cause the engine to seize so if you need to drive the car only drive it when the lights off else you will need to get new engine, it dont take long for the engine to be starved from oil and then seize.

i hope i have given you a few things to check and be getting on with

let me know how you get on or if you need further assistance ok

Posted on Jul 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil pump in 2000 dodge intrepid


Bottom of engine inside the oil pan.

Dec 09, 2012 | 2000 Dodge Intrepid

2 Answers

My 2000 dodge intrepid will stop running an then wont crank back up until after about 2 to 3 hours. I have canged the oil put new transmisson fluid in it changed the fuses.


Oil and fuses have little to do with your problem (unless a particular fuse keeps blowing) though changing oil is never a bad thing to do.
Likely you have an ignition component that is getting hot and internally expanding and causing an internal short when it's hot.
Unfortunately without the benefit of any testing, I can only suggest that you test the crank position sensor, coil and cam sensor. Also be sure that the fuel pump is running after it shuts down...Pump is in the tank and with the key turned on it should hum for a moment.. If not, check the pump voltage and the pump relay. Instructions for testing are contained in relatively inexpensive manuals such as haynes or chilton. You will also need a multi-meter (digital). Both items are always good to have and will help you many times over the years.

Oct 25, 2010 | 2000 Dodge Intrepid

1 Answer

My oil light keeps coming on in my car, but when I check the oil it's full.


Could be a faulty oil sending unit, which is usually located by the oil filter, a weak oil pump, or just needs a good old oil and filter change.

Apr 28, 2010 | 2000 Dodge Intrepid

1 Answer

Does dodge 2000 intrepid need periodic lubrication?


The Ball joints should be lubricated every time you have an oil change just to save you money in the long run.

Apr 19, 2010 | 2000 Dodge Intrepid

1 Answer

2000 dodge intrepid 2.7..Queston is will a 3.2


not really a complete wiring change and some sensors it is a head ache unless you have the money and a professional please be careful if you are to try this yourself. We all know the 2.7l has lots of problems. The engine was made for synthetic oil and the dip stick is not accurate. I own four of them. nice cars and the Canadian Built engines as any other engine have bugs that need to be worked out. thank you for your time, Lee Davidian

Jan 11, 2010 | 2000 Dodge Intrepid

1 Answer

Loud clicking/clanking noise on 200 Intrepid


Sounds like the motor is going out. 2.7s are bad about rod bearings going out. If you don't use the correct weight oil, and change it every 3K, they don't hold up too well.

Jun 08, 2009 | 2000 Dodge Intrepid

1 Answer

Where is the oil sending unit on a 1999 Dodge Intrepid?


I think it on the lower left side of block look from under car

Jan 14, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
1999 Dodge Intrepid Logo

2,014 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...