Question about Mercury Grand Marquis

2 Answers

Where can I find a fuse box diagram for my 1985 grand marquis. my blinkers stopped flashing. they work but do not flash

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 17,970 Answers

For 1985 Mercury Grand Marquis 5.0L FI 8cyl. the Flasher is located:
+ Front seating area, driver side, under dash, driver side of steering column, mounted in rear of fuse block
Application: Hazard flasher

+ Front seating area, driver side, under dash, driver side of steering column, mounted in fuse panel
Application: Turn signal


I hope this helps (remember to rate and comment this).

Posted on Oct 02, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 77 Answers

Your fuse box should have a big round thing plugged into it called a flasher. Little bigger than a quarter. Simply unplug it and replace it

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1985 Dodge pickup. Turn on blinkers they all flash.


i belive the problem is in your steering colum where your signal switch is remove the steering wheel and check the switch if thats not it then you have 2 bare wires touching

Jun 09, 2012 | 1985 Dodge Pickup 4WD

1 Answer

2008 grand marquis door locks just stopped working both in car and key pod. Power trunk stopped also. fuse ok.


Hello fellow Grand Marquis owner...

Fuses 2 and 9 in the central junction box protect this system.

There is a thing called the 'Driver Door Module' (DDM) that controls both the things that you are having trouble with.

If you want to test this module, a voltmeter will be necessary. The wiring diagram is available from Chilton either in a manual (which you should be able to borrow from a library), or online (if your library has the ChiltonLibrary available to you... you'll need a library card).

On the module, check for +12 volts on pins 10, 11, and 22. Check for ground on pins 23 and 24.

Working with the diagram is definitely the way to go.

Good luck from Detroit, MI.

Oct 10, 2011 | 2008 Mercury Grand Marquis

3 Answers

Fuse diagram for 1999 mercury marquis


HERE can find this diagram and description about fuses and fuse box locations: Mercury-Grand-Marquis-Owners-Manual

Hope helps (remember rated and comment this).

Aug 08, 2010 | 1999 Mercury Grand Marquis

2 Answers

I have a 1999 mercury grand marquis and the turn signals have stopped working. I checked all the fuses and they are good.


The bad about these are if the flasher is bad than it's internal inside the steering wheel there is no flasher for these outside of the column except the interceptor models i have one my self and mine whent out too. I also changed the blinker bulbs because there double fillament and if one fillament goes they tend to flash really fast. This is from experience

Mar 01, 2010 | 1999 Mercury Grand Marquis

1 Answer

The turn signal switch flash too fast


this usually indicates a blinker bulb has burned out.check that front & back lights are working w/blinker on.

Oct 10, 2009 | 2001 Mercury Grand Marquis

2 Answers

I'm trying to change some fuses, but I can't find the fuse box.


the fuse box should be located under the dash on the right hand side. or pocibly on the side of the dash on the right hand side.

Apr 14, 2009 | 1985 Mercury Grand Marquis

2 Answers

My 1985 Mercury marquis blinkers are not working


my need to replace turn signal switch on the steering coloum. Dont know if it will help or not.

Mar 28, 2009 | 1985 Mercury Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...