Question about 2004 Chevrolet Venture Passanger

2 Answers

The passenger front tire of my Chrysler 300m wobbles every time I hit a hard bump. Tie Rod maybe? I was told that the Tie Rod on that side was wore when I had new tires put on so that was my guess.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 31 Answers

Yes bro you better change tie rods and much better if you also check all ball joints and have your wheel allignments adjust and corrected...

Posted on Oct 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,581 Answers

Could be tie rod or ball joint or bushing. I would put it on a rack and pull at every joint. You can even check at home by jacking up the wheel and pulling it in each direction. There should not be any play. In/out play at side of wheel is due to tie rods or bushings. In/out play at bottom is due to ball joint.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is my front driver side tire wobble when i hit a bump


First, have the tire inspected before you do any expressway driving. you could have a damaged tire with a tread or internal ply separation. second, inspect the front shock absorbers, it sounds like the left front shock has failed and lost its hydraulic fluid. third have the front steering linkage and front suspension checked for worn or loose tie rods, idler arm, ball joints and stabilizer bar links. do this ASAP as you don't want to have the tire fail or any parts break while you are driving!

Dec 13, 2014 | 1990 Ford F150

1 Answer

I have a 2001 Chrysler 300M. Recently the passenger front studs broke off. I fixed the problem, but the tire is still wobbling as if its bout to jump! I retighten the studs and came to a conclusion that...


It could be a unbalanced tire or warped rim or bulg in tire and yes could also be aliment out or bad lower ball joint. This usually happenings if an impact on tire from a pothole happens.

Nov 02, 2014 | Cars & Trucks

2 Answers

Front wheel wabble


You need to check the front axle bearing. Once it gets bad it is the main reason for the shake or what is called the death wobble. Please get this checked before you have an accident. It is also contributed to bad tire wear and linkage damage. Hope this helps you out.

Feb 15, 2014 | 2002 Buick Rendezvous

1 Answer

Car shimmies over bumps


Sounds like you have a bad wheel bearing and or possible worn Tie rod ends. jack up front end of car and grab wheel on top and bottom and try to wiggle it also try by grabbing on the sides of the wheel. If you have play there you better get your wheel bearings changed. Your tires are probably showing wear on the tire that has bad bearings or bad tie rod end.

Mar 22, 2012 | 1995 Chrysler Concorde

2 Answers

Why does the whole car wobbles from side to side.


could be a broken belt in tire or sway bar could be bad, or your tie rod or ball joints

Jan 24, 2011 | 1999 Chrysler 300M

1 Answer

My tires are wearing on the inside like my last car i replaced the outer tie rod ends and ball joints. But on my chrysler 300 2002 model ther looks to be more parts that look like ball joints than just one...


Your toe-in is off. Maybe tie rod ends or may just need alignment. If you take it for alignment, they will tell you if any joints are worn out.

Aug 27, 2010 | 2002 Chrysler 300M

1 Answer

RATTLING NOISE ON THE PASSENGER SIDE FRONT TIRE


The first thing to check on a rattling noise is if going over minor bumps in the road if that is when it makes noise is a sway bar link, they make a rattling noise. If you raise that wheel up you might also want to try and wobble the wheel to be sure it is not a tie rod end or ball joint. Typically I run into the sway bar links or the sway bar bushings making the noise. However ive even seen it be a rock sitting on the strut plate.

Jul 24, 2010 | 2008 Chrysler 300

3 Answers

2001 jeepgrand cherokee wobbles and shakes @low speed


could be a bd axle or ball joints wheel bearings are also a concideration

Aug 02, 2009 | 2001 Jeep Grand Cherokee

4 Answers

04 Dodge 2500 4X4 shakes violently after hitting bump at 55 mph +


The bumps do initiate the shaking. When my 2006 Ram 2500 4x4 started shaking, I had just had it aligned that morning. A month or so before that alignment, my passenger side outer tie-rod broke while driving down a rock road. I replaced it with a heavy duty MOOG tie-rod end. Anyway, the same day I had it aligned I was driving back home from a job and towing my bobcat behind me. I hit a bump and the truck did the "death wobble" with the front end shaking violently up and down in an alternating fashion (one tire in the air while one tire on the ground and then vice-versa). I changed the tires first (which were worn-out 305/75/17 mud tires). Since the day I bought the truck new in Jan. 2006, I've had larger tires on the truck than the tiny 235/75/17s that came with it and I've done a lot of heavy towing with it and never had a problem until this alignment was done at Sears. I;m still trying to figure out if it was the alignment specs that they used or if the problem coincidentally started that same day. I also changed the steering stabilizer. Neither the new tires nor the stabilizer/damper helped the problem. So I changed the other outer tie-rod end and the upper and lower ball joints (all MOOG with grease fittings). I turns out they were worn out. So, the truck no longer shakes violently up and down when I hit a bump. That problem seems to be in check. However, now when I hit a bump the truck's front end wobbles side-to-side. I can do a few things to recover from it. I can hit the brakes pretty hard and sudden (which can cause an accident on the interstate), or I can **** the steering wheel side-to-side a few times (from 10 o'clock to 2 o'clock) and that stops it immediately...until the next bump in the road. Also, if I let my foot off the accelerator just before hitting a bump and let the truck coast over it instead of power through it, sometimes the truck will ride over the bump without incident. I found out yesterday on a 5 1/2 hour road trip that if I did 80 to 90 miles per hour and powered through every road blemish, the truck rode fine...no shaking at all. I suppose the high speed forces the tires to stay straight when they hit a bump. Lastly, to confuse my problem solving attempts further, sometimes the truck rides like a cadillac (for an hour or so) at regular speeds and no matter what bumps I hit. Then without worning, the front end will loosen up and get that sloppy feeling again and the wobbling comes back at every bump...until the next time it feels like tightening up and driving right again. I have no idea what to do now. I'm going back to Sears today to have them check their alignment. Other than that, all I can think of is to change the rest of the steering components and check the steering box for malfunction. I hope someone can help all of us Dodge owners out off of the road tested info that I've just provided. Dodge doesn't seem to care to address the problems with their trucks front ends, and we need a solution before people get hurt or die. I was almost run over by an 18-wheeler trying to figure out how to handle the shake. I can't afford to buy another truck. So I need to fix this one so I can keep working. If anybody has a concrete solution to these problems, please let us know. I've read 20 different opinions from mechanics on these blogs, but nobody has said yet that they fixed someone's truck with these problems and have since heard from that customer and everything is still working fine. Opinions are helpful sometimes, but they're also confusing when they're conflicting.

Jun 24, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
2004 Chevrolet Venture Passanger Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...