Question about 1996 Jeep Grand Cherokee

1 Answer

Hi, my 1995 5.2 grand cherokee is not shifting to 3rd gear and od, I change the fluid ( ATF +4 ) but nothing!! what do think is the problem ??? Thanks David

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 343 Answers

I believe that your bands may need to be adjusted, make sure ATF level is correct and check for vacuum leaks

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Grand Cherokee 4.0 Transmission..


I think your best bet would be to take it in and have it serviced . They will change fluid , filter and adjust the bands . That might be all it needs.

Feb 24, 2015 | 1995 Jeep Grand Cherokee

1 Answer

I suspect my 1995 windstar may have a bad modulator valve the fluid level seems to go away with no apparent leak and now it takes off in 2nd gear and won't shift to 3rd or od and the od light on t


I've been doing research on these vans. Seems I remember that if the OD light flashes >>> fluid level is low. Also, I read where Ford wants you to overfill fluid so as to allow you to go around corners without loss of lubracation. By this time you may have melted it down and bought a Honda. I have a 95 Teal color and just in flawless shape, however it won;t go in reverse. Just follow the hood ornament and don;t look back...right ! ?

Feb 28, 2013 | 1995 Ford Windstar

1 Answer

Is ATF+4 fluid supposed to be sinthetic


yes it is and the only fluid to use in jeeps, dodges and chyrslers

Nov 04, 2012 | 1995 Jeep Grand Cherokee

1 Answer

1995 Pontiac Grand Prix will not go into 1st gear. When gear selector is in 3, only 3rd and OD will work. It will NOT go to 2nd gear when the selector is in 3 or D. When gear selector is in 2 or 1, only...


You probably need a transmission pro to diagnose it properly, but it doesn't sound good. Was the original fluid you drained dirty brown? And did you see significant amounts of metal shavings in the transmission pan? The severe discoloration of the fluid is due to the clutch pack material wearing off and dispersed throughout the fluid. If the fluid smelled burnt, it is almost certain the transaxle is toast.

Apr 28, 2017 | 1995 Pontiac Grand Prix

1 Answer

1995 jeep cherokee larado wont shift to third or fourth its a 4.0


Check you transmission fluid first. This transmission has gears 1-2 auto 3 and OD 4. If you are in 3rd and 4th and it is not recognizing it, it may be the linkage or you transmission needs to be serviced. This transmission and transfer case in this year jeep if bullet proof. It is a great setup. You shouldn't have this problem unless the service to the transmission has been neglected. Pleas don't forget to rate this solution for me.

Jan 21, 2011 | 1995 Jeep Grand Cherokee

2 Answers

95 grand cherokee 4.0 4wd w/ auto trans. starts in 3rd gear, manually shifting to 1st only gives 2nd gear, won't shift down on own, won't go to OD & OD selector button does nothing, no light, no shift,...


it sounds like it is in limp in mode. try disconnecting the battery for ten minutes and reconnecting. this will reset the pcm and clear the fault codes. if it was just some sort of fluke if should be ok, if there is a problem it will return to limp in mode. if it wasn't acting up beforehand, it's more than likely an electrical, or computer problem, not a mechanical issue,

May 19, 2009 | 1995 Jeep Grand Cherokee

1 Answer

1995 jeep grand cherokee auto trans prob


sounds like the transmission is in "limp"mode it allows you to drive even though there is a problem with the transmission,the code 21 is probably a transmission manufature control code and not engine go to autozone and they can scan it for free,if you just had transmission fluid changed recently if you used anything other than what the manufature calls for like atf+4 then this is your problem,flush the system and do a fluid and filter change with correct fluid as by what the owners manual,or dealer calls for,don't rely on autozone to get it right.

Dec 25, 2008 | 1995 Jeep Grand Cherokee

3 Answers

Transmission


You can retrieve the codes through the OBD dianostic connector with a scanner.

Oct 11, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...