Question about 2001 Hyundai Elantra

1 Answer

P0500 P0501 P1529 2001 hundai elentra gls - 2001 Hyundai Elantra

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

P0500 and P0501 are vehicle speed sensor codes P1529 I can not find in any of my data bases. if you are using a generic scanner/code reader it may be a false display or for some reason it's not listed in my reference materials. I have 4 different sources 1 being factory material?

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Accelator sensor price for hundai accent sensor model 2005 veraion GLS


for great prices and choses try auto zone online im guessing your looking for for a TPS throttle position sensor

Feb 24, 2015 | 2005 Hyundai Accent

1 Answer

Looking for Fuel System Diagram.


2005 Hundai Elentra will crank but not start

Apr 08, 2013 | 2003 Hyundai Tiburon

1 Answer

Can you tell me where vechile speed sencor 'A' is on my focus st the fault code is P0500


P0500 Vehicle Speed Sensor "A"
P0501 Vehicle Speed Sensor "A" Range/Performance
P0502 Vehicle Speed Sensor "A" Circuit Low Input
P0503 Vehicle Speed Sensor "A" Intermittent/Erratic/High
Vehicle Speed Sensor Removal & Installation Automatic Transmission To Remove:
  1. Remove or disconnect the following:
    • Output shaft speed (OSS) sensor electrical connector.
    • Bolt and OSS sensor
To Install:
  1. Apply a light coat of petroleum jelly to the O-ring before installation
  2. Install or connect the following:
    • OSS sensor torque bolt to 89 in-lbs (10 Nm)
    • OSS sensor electrical connector
Manual Transmission To Remove:
  1. Remove or disconnect the following:
    • Vehicle Speed Sensor (VSS) electrical connector.
    • Retaining pin.
    • VSS.
To Install:
  1. Install or connect the following:
    • VSS.
    • Retaining pin.
    • VSS connector.
---
The VSS is on the transmission near the output shaft. It will not be a wheel speed sensor on the hub.

Good luck on this repair, tommy.

Nov 06, 2010 | 2006 Ford Focus

1 Answer

Looking to buy a chrysler grand voyager 3.3l auto limited top spec the year of the car is 2001 with these problems p0731 and p0500 and just wondered how serious they are and what the cost would be to fix...


P0731 Gear 1 Incorrect Ratio
P0500 Vehicle Speed Sensor "A"
P0501 Vehicle Speed Sensor "A" Range/Performance
P0502 Vehicle Speed Sensor "A" Circuit Low Input
P0503 Vehicle Speed Sensor "A" Intermittent/Erratic/High
Sounds like maybe the transmission has a problem or the tires are the wrong size.

I'm not sure how much to fix, though.

Depends on the price of tires (4 or 2) and maybe transmission problem needs to be looked at.

Oct 23, 2010 | Chrysler Voyager Cars & Trucks

2 Answers

Location of fuel filter on 2005 hyundai elantra


check right under the rear end of your vehicle body near the fuel lines

Dec 07, 2009 | 2005 Hyundai Elantra

3 Answers

Code P0501 vehicle speed sensor A range/


I found an answer to this in the reverse direction. While changing my front brakes, I noticed that the sprocket pickup for the speed sensor on the front passenger side half shaft that works with the sensor was cracked and ready to fall off. I removed it so that it wouldn't fly off and puncture a tire. I do NOT have Anti Lock Brakes on my 2001 Santa Fe. I started up the car wondering what to expect and experienced a P0501, P1529, P0500 and a second P0501. Looks like it time for a new half shaft (Axle).

Aug 20, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2001 Hyundai Elantra Logo

Related Topics:

1,358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...