Question about 2005 Porsche Cayenne

Open Question

Alarm: Route Guidance not Active - 2005 Porsche Cayenne

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sat nav in my Audi 2001 A6 cant start route guidance because no satellites are detected


If it never picks up the sat signal then you have a defective GPS. Best to just replace it, the repair cost is equal to a new one.

Jul 22, 2016 | Audi Cars & Trucks

2 Answers

2012. Recently broken into. Why didn't alarm go off?


Not all Nissan Sentra 2012 models have an active alarm!

Aug 31, 2015 | Nissan Sentra Cars & Trucks

1 Answer

Alarm horn will not turn off


do you have the alarm option, factory?
there are 2 horns
and 1 horn relay.
if the horn relay is energized, then the inputs to it are bad.
bad input is the horn relay has 12v across is coil pins, all the time.
so unplug the horn wires. silence.
then check relay , now that its quiet. is the coil hot?
hot means 12vdc across it. not thermal hot.
the relay on the 97 can be active for 2 reasons.
1: horn button stuck on, so pull that wire.Gray-org, at column
2: BCM is active same color, C2 in 13 is 0volts. (active)
if the BCM is honking the horn, we ask why, and that be alarm.
im reading at alldata.com so can you , under antithieft alarm sections.
if the alarm is activated, (is it) and any door switch is open, the horn honks.
if the gray-org. wires is at 12vdc , then the relay is bad
shorted, main contacts inside.
if the wire is 0v, its wrong.
ill stop, and wait until you find which it is, bad relay, bad horn button
or bad BCM or bad input to BCM.

Dec 04, 2013 | 1997 Jeep Grand Cherokee

1 Answer

How to disable car alarm


If it is a factory alarm system you can't..

Sep 12, 2012 | Cars & Trucks

1 Answer

Push alarm set on remote and it sounds like it is active two beeps, however, you can do what ever you want and alarm does not go off. Then when alarm is not set it will go off for no reason.


Hello
There could be a problem with alarm sensors or wiring. Check the first.
If wiring and sensors are ok - there must be an alarm logic processor gone. And must be replaced.
Good luck.

Jul 10, 2011 | Ford Windstar Cars & Trucks

2 Answers

My drivers seat moves full forward when i open the door


their is a fault with the memory and its a dealer only job because of the encrypted software used which is only readable by the factory via the internet so be prepaired for a bill and half or set the seat then unplug the wires

May 16, 2010 | 2005 Porsche Cayenne

1 Answer

1988 nissan maxima factory alarm faulty


try locking and unlocking the doors with the keys that is what i did and it solved my porblem

Jun 23, 2009 | 1988 Nissan Maxima

1 Answer

Does not cherp


Is your perhaps alarm in "valet mode"? I've got a Checkmate on my Honda, and I can turn valet mode on/off by putting the key to Accessory, then pushing the black button under the left of the steering wheel. The alarm chirps when you switch the mode.

May 23, 2009 | 2000 Buick LeSabre

1 Answer

Car alarm is not active


this will need to be reprogrammed by the dealer of the alarm.. factory alarm= car dealership

Apr 20, 2009 | 2008 Ford Focus

Not finding what you are looking for?
2005 Porsche Cayenne Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...