Question about 2000 Jeep Grand Cherokee

1 Answer

How do I remove the passenger side power window switch?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Should just have to pull the door panel off. Then disconnect the connector to the switch and remove the switch asm from the door panel.

Posted on Oct 03, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Brian032472
  • 150 Answers

SOURCE: 2 dr honda accord power window problem

I wouls suspect you have either a inoperative window regulator (the frame work for the power glass) or a bad power window motor. More often then not the are sold as a single assembly and are not very hard to replace on this vehice.

Posted on Nov 02, 2008

fknstart
  • 404 Answers

SOURCE: Driver side power window stops working in 2003 mits. eclipse

the switches need cleaning ,they have contacts in them that get dirty you can spray contact cleaner on them or use emery paper to file them, they are not to hard to pull apart

Posted on Jan 16, 2009

  • 4 Answers

SOURCE: 1999 Buick Century - passenger side power window does not work

Replace the Driver side window switch. These have a corrosion issue.

Posted on Apr 01, 2009

  • 41 Answers

SOURCE: 2002 Mercury Moutaineer-- Power window problem

Go through your fuse box and check for any burned out fuses also they may take a relay which may also be out. You can pick up a HAYNES or other brand repair manual at any auto parts store. Auto Zone sells mainly Haynes books, they will guide you to your repair in a step by step repair. The books are kind of like "repairs for idiots" they are really detailed and easy to follow.

Posted on May 27, 2009

  • 17 Answers

SOURCE: 2005 Chrysler Town & Country. Passenger side window problem.

HAVEK 1005 sounds right on track.... but also try this, usually works well for non functional power windows, specially Caravans.

NO COST PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.
7. Repeat 3-6 if necessary, but usually the first try works!

NOW, for the naysayers that says you must replace power window motors etc, at $$$ cost because the above fix does not work, or is not long lasting fix, or less than a "professional fix".... Well then, when the window fails to operate again, apply same fix again at that time.

I have fixed my van this way numerous times (usually once a year), and to all local friends I recommend this fix too, likewise do the same and are happy with the solution.

Posted on Jul 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My passenger side electric window stopped working on my 1991gmc sierra 1500. The passenger side switch panel don't work for the window but works for the lock. Driver side master switch doesn't work for the...


The odds of both switches going bad at the same time is high, remove the door panel and tap on the window motor with a hammer, while trying the switches. I may have jammed up. Ground a test light and check the motor connection, while trying the switch, power will show on either side depending on if it turning up or down

Mar 19, 2015 | Cars & Trucks

1 Answer

How would I be able to move the window up clearly the motor works but maybe the switch


Drivers side or passenger side?

If passenger side, some vehicles have the same switch in the back passenger windows. If you have those and they're similar to your front switches, swap them out. That's an easy way.

The other is to remove the switch and test for power with a multimeter with the car power on (not started).


Suggestion: Please include make, model and year in your questions.

Feb 20, 2015 | Cars & Trucks

1 Answer

Why doesn't my 2000 chevy blazer power windows and door locks and remote mirror doesnt work. Power window on passenger side does work


well, the first thing is to check the fuses and or relay for power windows.should be listed in your owners manual. if ok, then remove switch from drivers side window and check for power. if power to the switch then use a jumper wire from power side to motor side of switch. if window works then its the switch causing the problem. Good-day!

May 04, 2014 | 2000 Chevrolet Blazer

1 Answer

Passenger window switch works but the drivers side switch does not


was regulator bad? did it work from drivers side switch before you did regulator repair?..if so passenger side switch wiring has issue and is not sending signal through it back to the drivers side master switches.. otherwise you need to pin test for power up power down on drivers side switch and repair that if issue going to the window on passenger side.. (possible pinched at door jam area common)

Nov 20, 2013 | 2002 Hyundai Accent

2 Answers

How do i change the drivers side window motor an an 05 kia sedona


You have to remove the inner door panel to
access the window regulator

You remove the regulator & then the motor from it

You Tube Video will provide a visual of several
similar window motor replacement jobs

Go there-- enter your car,question ,details,etc--- then move
around the site to watch various things

Dec 09, 2012 | 2005 Kia Sedona

1 Answer

My passenger side electric window isnt working?


if not working from drivers or passenger side you need to remove passenger side door skin, with a test light check for power at the motor? If you have power at the motor and the motor is grounded you need a motor. If you dont have power and ground then you need a switch. This can be tricky sometimes the passenger switch is good and the problem is in the drivers side switch which is the main controller.

Nov 18, 2012 | 2003 Toyota RAV4

1 Answer

2004 Toyota tundra passenger power window switch not operational


Try a passenger side door switch or a new complete master switch on drivers door. Alaways check fuses also.

Jun 16, 2012 | 2004 Toyota Tundra Cab

1 Answer

Passenger side automatic window switch is not working in my 2004 Chevy Aveo. The window is operational from the driver's side master switch but not the passenger side. Im thinking its a fuse or a relay,...


Make sure the window lockout button is not depressed on the master window switch. This will turn off the other switches and not let them control there respective windows.

Power is supplied to all the windows from one fuse and one relay. So if the master switch operates the window than we know the fuses and relays are o.k. We know the master switch will operate the window so that tells us the window motor and ground side of the passenger window motor circuit are also good.

Which leaves us with a bad switch or no power to the switch. The passenger window switch gets its power to operate independently from the master switch window lockout button. When the button is off power is supplied to the passenger switch and allows the passenger to operate the window themselves.

The only thing you need to do is check for power at the passenger switch on the brown wire with orange stripe. If there is power there then you have a bad switch.

Oct 08, 2010 | Chevrolet Aveo Cars & Trucks

1 Answer

2005 Chrysler T&C passenger side window went down and won't come up. All other automatic windows and door locks work fine - don't hear any motor sound / buzz / etc. when either driver side or passenger...


If the window had not been slow in it's action before it stopped working I'm guessing you only have a connection problem. I would remove the door panel and using a multimeter check the hot wire to see if power is reaching the switch. If it is check the connection on the motor. If power is reaching the motor through the switch you have a faulty motor. If at any point of testing there is no power backtrack the power wire to find where the break is. (it's usually in the door jam)

Apr 13, 2010 | 2005 Chrysler Town & Country

2 Answers

Passenger Window Stuck all the way Down


Try switching the power window switch from the passenger side to the drivers side. Before you do that try with the switch on the up position, wiggle it from side to side. The contacts may be worn and by wiggling it may make contact. Other then that try to park it in side or garbage bag taped to keep rain out till you get it to the shop.
Hint, take it to a Auto window repair shop to replace the switch if it's bad or if the motor is bad. They have more experience to removing the door panels and removing the power window regulator (motor) if that needs to be replaced.
Good luck and hope this helps. 

May 30, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...