Question about 2004 Mitsubishi Lancer

1 Answer

Blower works only in high on my mitsubishi lancer 2000, what is the cause

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

The "blower motor resister" that slow the motor down to the slower speeds is broken or burnt out. The motor is running at it's default setting of full speed. The resister is usually located on the blower motor housing so it gets lots of air moving over it (it gets hot). It is held on by two or three screws and when you take it out you will see several different sized coils (one for each speed). Hard to get to easy to replace.

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Mitsubishi Endeavor. Blower motor no longer works. Right before completely dying. If I would turn left I heard water flowing and blower barely worked. Now no water noise or fan working. Help plz


2004 Mitsubishi Endeavor AC transistor blower fix - YouTube

? 8:02
www.youtube.com/watch?v=6g_xozxuziE
Mar 19, 2015 - Uploaded by Peter Zafra
How to fix a Mitsubishi endeavor ac blower that stopped working. ... 2008 Mitsubishi Lancer HVAC Blower Motor Install How To - Duration: 9:07.

Sep 10, 2015 | Mitsubishi Cars & Trucks

1 Answer

Lancer 2000 mx efi high fuel consumption


1. Check if the ECU is throwing any error codes.

Could be
2. O2 sensor(s) or/and clogged Cat converter
3. Dirty air cleaner
4. leaking injectors
5. Worn or broken rings: check the wet and dry compression.
Might even be the ECU itself, running in "limp" mode because of a partial board failure.

Mar 09, 2015 | 2000 Mitsubishi Lancer

2 Answers

Cannot control engine rpm mitsubishi lancer engine 1984. fuel injection sometime correct rpm, sometime too low and too high rpm


Your IACV idle air control valve has gone bad . When you put the car in gear does it take off and accelerate to about 50 MPH without touching the gas pedal ? Had the same problem. Part from Mitsubishi is about $435 PN # MR578268. It is about $30 to $50 dollars on any other car. If this is the problem, the IACV is located on the throttle body and is held on with three screws. I purchased the whole throttle body at a salvage yard for $40, took the IACV off and put it on my throttle body. Car works normal for now, I am looking for another spare. If enough people complain to MItsubishi and www-odi.nhtsa.dot.gov

Jul 22, 2010 | 2002 Mitsubishi Lancer

1 Answer

Fuse of blower gets hot


Fan Motor drawing to many amps. .

Jun 10, 2010 | 2008 Mitsubishi Lancer

5 Answers

I have a mitsubishi lancer cedia model 2000 frequent stall when driving i switch it off and on again in the ignition and come to live again for a few miles and does the same again what could be the cause


If you have the GDI model,they were designed to run on very lean air/fuel ratio.
Once the mileage is up a bit a lot of problems can be traced back to a high carbon build up in the intake manifold.

Apr 24, 2010 | 2002 Mitsubishi Lancer

2 Answers

2000 mitsubishi lancer gli coupe owners manual


ebay for one, any dealership can order you one and junk yard for 5 bucks. 2000-2006 will work, good luck hope that help

Jul 11, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

DASHBOARD INSTRUMENTS STOP FUNCTIONING IN MILD TO WARM WEATHER. LANCER MR COUPE 1998 MODEL


I HAD THE EXACT SAME PROBLEM WITH MY 2000 LANCER MY DASH WOULD WORK THEN ALL INSTRUMENTS WOULD NOT WORK INDICATORS LIGHTS WORKED IT WAS WEIRD AFTER 3 MONTHS GOING TO AUTO ELECTRICIANS MECHANIC ANYONE REALLY IT WAS FIXED ON FRIDAY 11TH DEC 2009 !!!!
I TOOK IT TO A PLACE CALLED ADVANCED AUTO INSTRUMENTS IN REVESBY SYDNEY PH9792 7399
WHEN I CALLED THEY NEW EXACTLY WHAT WAS WRONG WITH MY CAR BEFORE I TOLD HIM.
HE SAID IT IS A FAULT WITH THE LANCERS AND THEY ALL SHOULD HAVE BEEN RECALLED BUT OF COURSE THEY DID NOT BASTARDS
ON MY RECEIPT IT SAYS REMOVE AND REFIT CLUSTER FROM MITSUBISHI LANCER REPAIRED SPEEDO CIRCUIT BOARD AS REQUIRED CAUSING ALL GAUGES TO STOP WORKING $135.OO ONLY I AM OVER THE MOON
HOPE THIS HELPS SOMEONE

Oct 17, 2008 | Mitsubishi Lancer Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...