Question about 2004 Ford Explorer

1 Answer

How to replace a front fog lamp - 2004 Ford Explorer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers

  • If your fog lamp is connected to or behind a grille, pop it out. This can be done by first removing the clips or screws connecting it to the car and gently pulling it out. (If your fog lights are not connected to a grille, proceed to step 2.)Find the bolts that hold the fog lamp in place; you may have to get underneath the automobile to do so.Using your ratchet wrench, remove the bolts.4Grab the connector on the back of the fog lamp, turn it counter-clockwise and pull it out. This should remove the actual light bulb from the lamp fixture.Remove the fog lamp from the car and place the new one in.6Place the light bulb into the new fog light and turn clockwise to lock into place.Bolt the fog lamp back into place, if you had to remove the grille, put it back now and screw/clip it back into place.Turn on the fog lights and make sure everything is working properly


  • Posted on Oct 02, 2010

    6 Suggested Answers

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    • 3 Answers

    SOURCE: Front Fog Lamps

    My guess is you have a corroded wire (that has shorted out the connection); known problem for this vehicle.

    Posted on Sep 28, 2008

    • 3 Answers

    SOURCE: difficulty with replacing fog lamp bulb on 2001 Hyundai XG300

    Remove the headlight and put it in from the top.

    Posted on Dec 31, 2008

    • 4 Answers

    SOURCE: 01 solara fog lamp replacement

    nono... go in through the engine. Pop the hood and you can do it without detaching anything but the old fog lamp.

    Posted on Jun 08, 2009

    • 66 Answers

    SOURCE: Front fog lamp replacement

    Follow these steps carefully:
    Remove the headlight assembly completey, it has two slide brackets - pull them up gently about an ich.
    Once the headlight is out of the way' look down and you'll see the foglight connector. half a twist to the left and pull it outwards gently.
    The plug goes right into the light bulb so be extra careful with this... Unplug it from the bulb and replace it.
    Good luck.

    Posted on Jul 09, 2009

    • 242 Answers

    SOURCE: d40 fog lamp replacement

    FOG LAMPS WILL UN BOLD FROM BEHIND THE BUMPER.THEN JUST UNPLUG AND DO THE REVERSE TO FIT THE NEW ONE

    Posted on Dec 27, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    2005 avalanche Fog lights are staying on with


    The fog lamps are computer controlled .the body control module (BCM) will energize the fog lamp relay control circuit. The BCM receives the park lamp ON signal from the interior park lamps supply voltage signal circuit.
    DTC B2527 Front Fog Lamps Circuit Low
    The body control module (BCM) monitors the front fog lamp switch signal circuit in order to determine when the fog lamp relay is to be energized. When the BCM senses that the front fog lamp switch signal circuit is grounded momentarily by pressing the fog lamp switch, the BCM energizes the fog lamp relay by grounding the fog lamp relay control circuit.

    Your best bet , take it to the dealer . Could need BCM replaced , would need to do testing using the Tech 2 scan tool . A new BCM has to be programmed .

    Body Control Module (BCM) Replacement
    If the body control module (BCM) is replaced, the following procedures must be performed in the following order:
    BCM Reprogramming--Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems.
    Important: This procedure has to be performed only for vehicles equipped with the Passlock™ System.
    Theft Learn--Refer to Programming Theft Deterrent System Components in Theft Deterrent. A new BCM will learn the Passlock™ information automatically, but the powertrain control module (PCM) must still learn the theft information from the BCM.

    Mar 29, 2017 | 2005 Chevrolet Avalanche

    1 Answer

    How do I change my fog light bulb in my 1999 oldsmobile alero


    YOU HAVE TO REMOVE FRONT SPLASH SHIELD TO REPLACE FOG LIGHTS.THEN YOU REMOVE THE TWO BOLTS RETAINING THE FOG LAMP TO THE BACK OF THE FRONT BUMPER REINFORCEMENT BEAM AND LOWER THE FOG LAMP.

    Apr 30, 2010 | 1999 Oldsmobile Alero

    1 Answer

    How do I replace the Drivers side fog lamp (not just bulb) on my 2002 Audi A4 18T?


    First remove the driver's side fog lamp plastic cover out from front bumper. After that you will find torx socket head panel screws from fog lamp. See picture below:

    de0b0fe.png

    Feb 06, 2010 | 2002 Audi A4

    1 Answer

    D40 fog lamp replacement


    FOG LAMPS WILL UN BOLD FROM BEHIND THE BUMPER.THEN JUST UNPLUG AND DO THE REVERSE TO FIT THE NEW ONE

    Dec 27, 2009 | 2006 Nissan Pathfinder

    1 Answer

    How do I replace the fog light assembly on a 2000 Olds Alero?


    you replace the fog lamps by going under front bumper fascia.remove the pushpins and take down the splash shield to access the back of the fog lamps.then you remove two bolts retaining the fog lamp to the back of front bumper.besure to wear clean gloves.because fog lamps is halogen bulbs.if you touch with bare hands the oils from hands will make the bulbs over heat and blow out.

    Dec 03, 2009 | 1999 Oldsmobile Alero

    1 Answer

    Fog lamp replacement on 2008 elantra


    1. Disconnect the negative (-) battery terminal. 2. Remove the front side cover screw. 3. Remove the front fog lamp assembly connector (A).

    38eda8f.gif 4. Remove the front fog lamp bulb (A).

    20279ba.gif

    Jun 20, 2009 | 2008 Hyundai Elantra

    1 Answer

    How do you replace the fog light bulbs on a 2004 buick regal?


    Notes FOG LAMP BULB REPLACEMENT - FRONT

    REMOVAL PROCEDURE
    f98bf40.gif
    1. Remove the front bumper fascia deflector.
    2. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
    01c84b0.gif
    1. Rotate the front fog lamp bulb/socket counterclockwise to release.
    2. Remove the fog lamp bulb/socket from the front fog lamp assembly.
    4065803.gif


    1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
    b182709.gif
    1. Connect the electrical connector to the front fog lamp bulb/socket.
    2. Install the front bumper fascia deflector.

    Jun 16, 2009 | Buick Regal Cars & Trucks

    1 Answer

    How to replace a fog lamp with replacement bulb only on 2002 toyota 4runner sport edition???? the three screws on the bottom?


    Well, these are the steps and I will post the pic here in a second...looks like 2 screws...but like I said, you can see the picture for direction on this.


    Remove or disconnect the following:

    Front turn signal lamp
  • Connector
  • 2 screws
  • 2 claw fittings
  • Fog lamp assembly
  • Fog lamp bulb as shown
  • Fog light unit

  • To Install
    1. Install or connect the following:
      • Fog light unit
      • Fog lamp bulb as shown
      • Fog lamp assembly latch the 2 claw fittings and 2 screws
      • Connector
      • Front turn signal lamp
    Trying to post the pics now....

    May 14, 2009 | 2002 Toyota 4Runner

    1 Answer

    01 solara fog lamp replacement


    nono... go in through the engine. Pop the hood and you can do it without detaching anything but the old fog lamp.

    Dec 01, 2008 | 1999 Toyota Camry Solara

    1 Answer

    How do you replace 2004 Camry Fog Lamps?


    yes, position self in front of the fog lamps, push the fog lamps light assembly and slide it to the direction of the center of your car, wait for a part of the assembly to pop-out and pull the whole assembly out. No screws involve

    Nov 26, 2008 | 2004 Toyota Camry

    Not finding what you are looking for?
    2004 Ford Explorer Logo

    545 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5470 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...