Question about 1997 Isuzu Rodeo

1 Answer

My 98' Isuzu rodeo Has just blown Head Gasket how do I repair this? following an over heat the radiator had begun to warp and oxidize around upper hose ,from runnig water-only through system just before it blew the upper hose. it literally, busted at the seem After replaced another hose from the underside leading to heater core- blew the lower radiator Hose. finding residue sugests a powder seal might have been used is there a way to succesfully remove any and all clogging to ensure proper coolant circulation, oh and the fan Stoped working once I replaced Radiator What Happened there?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 343 Answers

If you are not very mechanically inclined leave this to a shop, head gaskets can be very complicated for some. the block can be flushed once the head is removed or even before. the fan is actuated by a sensor (usually on the radiator). Replace it since the motor got that hot. Sorry to say you may have warped the head or even cracked it if the heat was that high. You need to invest in a mechanics manual for your vehicle and read all that pertains to cylinder head R & R before you attempt any of this yourself

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are the block and heads the same in an 98 Isuzu Rodeo 3.2 and a 2001 Isuzu Rodeo 3.2?


3 places you can get the answer.
1) dealer parts department
2) a salvage yard or parts store like auto zone or advanced auto.
3) a machine shop that does head repair. I would start here and have the donor head checked before i installed it and then found out it wasn't flat.

May 18, 2014 | Isuzu Rodeo Cars & Trucks

2 Answers

Built up pressure inside radiator and coolant come


Check for a blown head gasket .or a cracked block

Oct 12, 2013 | 2002 Isuzu Rodeo Sport

3 Answers

Oil is mixing with the anitfreezein the radiator


This can be a very serious problem, please have your Rodeo checked by a REPUTABLE shop as soon as possible.

Dec 14, 2011 | 2000 Isuzu Rodeo

2 Answers

Hi, I am working on my dad's 1993 Rodeo. He said that the only problem was the radiator. So he had some mechanic replaced the radiator. Somebody used the car, and it overheated. The radiator is empty...


Hello Alex...Anytime you have coolant in the oil and it's not the engine oil cooler it means the engine must be disassembled to locate the failure. The next options are not so pretty. There are three causes for coolant in the motor oil and all require engine dis-assembly....This can be tricky because often the repairs overlaps and it is difficult to tell which one is causing the problem....Always check the intake gasket first on V type engines. Then the cylinder head gaskets, cylinder heads, and finally the engine block...

Good luck and i hope this helps FixYa!

Aug 25, 2011 | 1995 Isuzu Rodeo

1 Answer

My 1995 isuzu rodeo is overheating, We have already changed out the water pump and the thermostat. What else could it be?


if it overheats quickly, you may have a blown heat gasket - if it overheats slowly, check your fan clutch - if it is worn out the fan won't turn fast enough - also check inside the radiator to see if the passages are clogged - if there is a lot of build up around the openings then you will need to replace the radiator or take it to a radiator shop and have the top removed so they can clean out the passages - also make sure there is nothing obstructing the flow of air through the radiator like leaves or paper that might have blown up from the road - good luck and have a nice day :O)

Aug 05, 2011 | 1995 Isuzu Rodeo

2 Answers

The engine misses on 3 and 4 and compression leaking into radiat


If you do in fact have compression (air) blowing in to the cooling systems this would show either a blown head gasket, warped head or cracked head. Please od not run the Rodeo until repaired as if coolant is getting in to the cylinder or oil (Your oil will look like chocolate shake) it can do severe damage. What motor please 3.0 V6?
THanks,
Tom

Nov 08, 2009 | 1993 Isuzu Rodeo

2 Answers

What causes a water leak in the back of the engine in a 95 isuzu rodeo


could be a "core plug" on the hack of the cylinder head,,, witch would be a head off job,,,or a head gasket,, also a head off job,,,
try rad weld,, or stop leak,,, i find its quit good for this,,,,and is a lot cheeper than the repair shop price

Oct 26, 2009 | 1995 Isuzu Rodeo

2 Answers

Blown head gasket. what is the cause? there is very high pressure in the radiator and eventually a lot of air and little coolant. it then starts over heating because all the coolant gets pushed out at the...


Running hot will cause head gasget to fail. Or if head is not torqued properly, or a faulty head gasget. Pressure in cooling system means, blown head gasget or cracked head.

Mar 05, 2009 | 1997 Isuzu Rodeo

1 Answer

Overheated a 2000 isuzu rodeo 2.2 litre


  1. Sorry.... I did not see the 2.2 in title. Install the cylinder head with a new gasket. Tighten the bolts in sequence as follows: Step 1: 18 ft. lbs. (25 Nm)Step 2: Plus 90 degreesStep 3: Plus 90 degreesStep 4: Plus 90 degrees
    1. Step 1: 18 ft. lbs. (25 Nm)
    2. Step 2: Plus 90 degrees
    3. Step 3: Plus 90 degrees
    4. Step 4: Plus 90 degrees

Aug 24, 2008 | 2000 Isuzu Rodeo

1 Answer

92 isuzu rodeo overheating still


hey
u says that u didn't replace the thermostat yet
Your thermostat is sticking. DO NOT DRIVE if the car overheats, you can do some serious engine damage, if you haven't done so already. Get the thermostat changed out immediately.

What happened is your thermostat is sticking. It was stuck and you saw it overheat (and should have stopped immediately). The added pressure from having a stuck thermostat pushes the fluild into the overflow.

The temperature may have gone back to normal if the thermostat "finally" opened. However, since the thermostat is sticking, it is unreliable and I would get it replaced.

Driving when the engine overheats can easily cause gaskets, such as the head gasket to fail and heads to warp. If this has occurred, you're looking at a new engine.

Jul 13, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
1997 Isuzu Rodeo Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...