Question about 1995 BMW 5 Series

1 Answer

How do i remove the front driver's side inside door panel of 1995 BMW 525i?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sorry i can not explain it in english, but i do it in spanish. primero, nesesitas un desarmador plano y una llave del tipo torx. quita la pequna cubierta de plastico que esta en la manija e intro duce la llave torx y quita el tornillo, despues toma el desarmador plano y por el borde de la cubierta de la puerta bota los seguros de plastico que estan alrededor, son alrededor de 9 despues con la ventana abajo empuja la cubiesta hacia arriba tomandola de la manija.

Posted on Oct 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 BMW 525i 6cyl How many oxygen sensors does it have? And location of them?


It has four. The first two are called the pre-cat (catalyst) or hot side. They are located under the hood on the left side (when standing at the front looking at the motor) on the exhaust manifold. The other two or called the post-cat or cold side. They are in the exhaust pipes coming down from the motor under the car at the passenger side. Replace them with genuine Bmw parts. They are more expensive but you won't have any issues. A lot of problems come from aftermarket sensors because the calibrations aren't the exact same.

Jul 22, 2014 | 1995 BMW 525i Sport

1 Answer

How do I take off the drivers side door panel in a


a few hidden screws then pop the plastic plugs off the door with that special snap-on door panel removal tool.

Jun 02, 2010 | 1988 BMW 3 Series

1 Answer

Where is the battery situated on a bmw 525i 1995?


The location of the battery in the BMW 525i series is under the back seat on the passengers side. To access the battery, grab under the front portion of the back seat and pull upward with some force. There are two slips into which the seat is secured. One on the passenger side and one on the drivers side, again in the front of the back seat. There is not one in the center.

May 15, 2010 | 1995 BMW 5 Series

1 Answer

How do I remove inner door panel on 1995 BMW 525i


This shows the front door removal. Rear is similar.
http://www.bmwe34.net/E34main/Maintenance/Body/DoorRemoval.htm
Basically you remove anything held by screws like the arm rest and inner door handles and then go around the edge of the door panel and pop it off the door. There are little plastic clips that snap the panel to the door. Some of these might break, but they are cheap and you don't need ALL of them. Go slowly and use a tool like a plastic putty knife if needed.

Jan 03, 2010 | 1995 BMW 5 Series

1 Answer

My 1995 bmw 525i passenger window stopped working


Verify the wires that run to the trunk, after many opeing and closing the wires wear, you may have short. There are many post in some BMW club forums.

Aug 24, 2009 | BMW 525 Cars & Trucks

2 Answers

I have a '93 525I, The driver window has come off track.


The clip on the inside handle needs to be pushed in and towards the front of the vehicle. Slight prying with a small screwdriver might be necessary.

Jun 16, 2009 | 1993 BMW 5 Series

1 Answer

1995 BMW 525i seat height motor works on one side of seat only


there are 2 cables that come out of the motor that operates that feture. Over time the outsdie tube of the cable streaches, causing the cable that turns inside, to come out of the transmission is drives. One way to fix this is to remove this cable and shoren the outside tube by cutting it, and then re-insall back into the transmission. This is a 50/50 chance repair. The correct way to cure this issue is to replace the lower seat frame. $$$

May 19, 2009 | 1995 BMW 5 Series

2 Answers

Where is the fuel filter in my 1995 bmw 525i


Should be under the car, drivers side, just in front of rear wheel. Make sure and release the fuel pressure slowly when you take the lines loose.

Apr 01, 2009 | 1995 BMW 5 Series

1 Answer

2005 BMW 525i


i thought it was a smaller panel forward of that which is removed to gain access, at least that's how it was on the E39 model. should be similar. look for a small oval panel or "race track" looking panel.

Mar 17, 2009 | 2007 BMW 525xi Sedan

1 Answer

How do you remove the door panels on a 1995 mercury villager


http://autos.groups.yahoo.com/group/villagerquest/

you have to remove the cup behind the door handle. rmove screws aroun the door pull. get a screw driver and pry the trim panel away from the door carefully. There is a plastic christmas tree clip every 6 inches. when the bottom & sides are free, lift up the trim panel to get it out of the track at the base of the window.
--------------------------------------------------------------------------------------

Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942).

  1. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screw from the door pull handle.
  1. If equipped with power windows, remove the door pull handle. Disconnect the electrical connections.
  1. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124).
  1. Remove the front door trim panel.

Jan 04, 2009 | 1995 Mercury Villager

Not finding what you are looking for?
1995 BMW 5 Series Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...