Question about 1990 Nissan Hardbody King Cab

3 Answers

Engine cuts out

Vehicle starts and idles fine. When you hit the gas (driving or neutral) once the rpm gets to 2500 rpm revs between 2000-2500 until you give it lots of gas then it's fine.

Posted by on

  • Anonymous Mar 28, 2014

    engine will cut out or "stall" at aroung 2500 rpms and wont run over 55 mph

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 304 Answers

Hi there,

have you check the gas filter, pump, air filter..

`jack

Posted on May 26, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 230 Answers

This may be due to the fault of the knob that connects the gas cylinder and the engine check that better you consult a mechanic

Posted on May 26, 2008

  • balachander megavarnam
    balachander megavarnam May 26, 2008

    check the pump and the gas filter

  • balachander megavarnam
    balachander megavarnam May 28, 2008

    You may press the accept button on my solution if you are satifyed.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 19,396 Answers

It is likely to be a problem with injectors

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 sprinter 2500, every time i start to drive I have no power for about 5 to 8 seconds nothing happening then slowly it starts to rev up engine and start to drive then its fine , there r no codes


Check the engine in neutral/park and depress gas and confirm engine is slow to rev up. If the engine revs in gear and little or no movement have the transmission checked.

this car is likely a drive by wire.(no cable between gas pedal and throttle actuator motor) Some one needs to observe the throttle to see if it advances when the gas is depressed.

The simplest analysis would be the connection to the engine computer with not a simple scan tool but a Chrysler proprietary analyzer to see the interaction of throttle position and engine RPM

Hope this helps?

Jul 06, 2016 | 2008 Dodge Sprinter

2 Answers

Grand prix 02 cuts out when try to drive but idle fines


This vwehicle has a rev limiter, if your trying to rev it up in neutral it will cut out at 2grand.

Feb 28, 2013 | 2002 Pontiac Grand Prix

1 Answer

I have a 99 chevy malibu with roughlt 220 thousand miles... make a long story short I was in a fender bender at about 25 mph. Minor. Impact front left panel. Completely drivable from the scene. Well I only...


Sounds like maybe a motor mount may have broken,if you
open the hood and put the car in drive ,then neutral then reverse
the engine should only "rock" about an inch or so,if it really jumps
that is the problem.

Feb 26, 2013 | Cars & Trucks

1 Answer

I have a 2008 mercury Milan with nearly 60k miles on it. When I come to a stop the rpm drops by 1000 then recovers quickly. What should I do to fix the problem? Any suggestions will be greatly appreciated.


Check out related help links to troubleshoot these problem:----Click the link below:---Idles Fine but RPM jumps in drive mode? http://technoanswers.blogspot.in/2012/07/idles-fine-but-rpm-jumps-in-drive-mode.html
---------Mitsubishi Lancer rpm needle bounces? http://technoanswers.blogspot.in/2012/02/mitsubishi-lancer-rpm-needle-bounces.html
--------How to adjust rpm on 2009 dodge charger SRT8?


http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
---------
Engine cuts out at 3000 RPM? http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html

---------

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

---------
High rpm in neutral? Inconsistant high RPM in neutral? http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-----------
Jetski Sputters and Low RPM? http://whatisbyme.blogspot.in/2012/07/jetski-sputters-and-low-rpm.html

--------
Fuel Injection Problem And RPM suddenly increases http://whatisbyme.blogspot.in/2012/07/fuel-injection-problem-and-rpm-suddenly.html

----------
2005 Toyota Highlander: Engine runs hard RPM below 3000? http://whatisbyme.blogspot.in/2012/05/2005-toyota-highlander-engine-runs-hard.html

---------
1987 Toyota Camry: RPM Drops going Up hills? http://whatisbyme.blogspot.in/2012/05/1987-toyota-camry-rpm-drops-going-up.html

-----------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
1990 Toyota 4Runner: Engine cuts off when reaches 2000 RPM?


http://whatisbyme.blogspot.in/2012/05/1990-toyota-4runner-engine-cuts-off.html

------------
1999 Toyota Camry: Erratic stalling and high engine RPM at idle?


http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html

---------
1995 Toyota LS: Misfire at idle or low RPM http://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

-----------
Lexus RX: Tapping noise under Valve Cover At Low RPM? http://technoanswers.blogspot.in/2012/04/lexus-rx-tapping-noise-under-valve.html

----------
These will help.
Thanks.

Nov 22, 2012 | Cars & Trucks

1 Answer

Driving on the road the RPM goes higher wituout speedind


Check out related help links to troubleshoot these problem:----Click the link below:---Idles Fine but RPM jumps in drive mode?http://technoanswers.blogspot.in/2012/07/idles-fine-but-rpm-jumps-in-drive-mode.html
---------Mitsubishi Lancer rpm needle bounces?http://technoanswers.blogspot.in/2012/02/mitsubishi-lancer-rpm-needle-bounces.html
--------How to adjust rpm on 2009 dodge charger SRT8?


http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
---------
Engine cuts out at 3000 RPM?http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html

---------

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

---------
High rpm in neutral? Inconsistant high RPM in neutral?http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-----------
Jetski Sputters and Low RPM? http://whatisbyme.blogspot.in/2012/07/jetski-sputters-and-low-rpm.html

--------
Fuel Injection Problem And RPM suddenly increaseshttp://whatisbyme.blogspot.in/2012/07/fuel-injection-problem-and-rpm-suddenly.html

----------
2005 Toyota Highlander: Engine runs hard RPM below 3000?http://whatisbyme.blogspot.in/2012/05/2005-toyota-highlander-engine-runs-hard.html

---------
1987 Toyota Camry: RPM Drops going Up hills?http://whatisbyme.blogspot.in/2012/05/1987-toyota-camry-rpm-drops-going-up.html

-----------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
1990 Toyota 4Runner: Engine cuts off when reaches 2000 RPM?


http://whatisbyme.blogspot.in/2012/05/1990-toyota-4runner-engine-cuts-off.html

------------
1999 Toyota Camry: Erratic stalling and high engine RPM at idle?


http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html

---------
1995 Toyota LS: Misfire at idle or low RPMhttp://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

-----------
Lexus RX: Tapping noise under Valve Cover At Low RPM?http://technoanswers.blogspot.in/2012/04/lexus-rx-tapping-noise-under-valve.html

----------
These will help.
Thanks.

Nov 22, 2012 | 2008 Toyota Avalon

1 Answer

Chugs, acts like it's not getting gas once warmed up. Idle's fine


This problem can be several things. When your engine is cold, your computer is in a "closed loop" and just pretty much keeps the engine running until warmed up. After reaching operation temperature, the computer starts reading all the sensors. If one sensor is not connected or is defective, you will experience performance problems. Most of the time this will turn on the check engine light, but not always. Second is the fuel pump. This too will cause erratic engine problems.

Apr 10, 2009 | 1991 Chevrolet Silverado 2500

1 Answer

My 1987 turbo toyota supra will only rev up to 2500 rpm then cut out like a governer. when it drops to about 2000 rpm it will rev back up only to 2500 rpm. at an idle it runs rough


The throttle position sensor has an idle switch in it that tells the car's computer that the throttle is positioned at idle. If the idle switch sticks in the idle position, the computer will not allow the engine to rev more than 2500 rpm. In your case, I think the switch is stuck.

First, see if you can get the trouble codes to come up. Rig a jumper wire and jump between the "T" terminal and the "E1" terminal in the car's "Diagnostics" box. It is a small black box on the driver's side of the engine compartment near the battery. Open the lid and on the inside of the lid it has a map of the terminals.

Once you hook up the jumper wire, turn the ignition switch to on but do not start the car. If there are codes, the check engine light (orange) will blink the 2 digit code. It blinks the first digit, pauses, then blinks the second digit. The code for the throttle position sensor is code "41". That is, four blinks...pause...then one blink. If this code comes up, change the throttle position sensor. (If there are no codes, the check engine light will steadily blink once per second until you turn the key to off.) Don't forget to remove the jumper wire when you are finished.

Apr 10, 2009 | Toyota Tundra Cars & Trucks

2 Answers

Car starts and idols fine but once you get it to 4000 rpm it cuts out and then every time you hit the gas it will accelerate then cut out. it doesn't die out until you do this for a long time.


Ya know First i never drive a car at 4ooo RPMS cant remember when but anyway.
Check the Intake Air tube the goes into the air cleaner and throttle body for cracks and cuts and being loose. Fuel Pressure have it checked while you are driving to make sure your noy loosing fuel pressure at the high Rs. Ignition System Factory Plugs and wires no fancy discount suppose to increase horsepower stuff

Aug 05, 2008 | 2001 Pontiac Grand Prix

Not finding what you are looking for?
1990 Nissan Hardbody King Cab Logo

Related Topics:

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...