Question about 1998 Ford Explorer

1 Answer

I have Ford Explorer model 1998 but its indicator lights are not working meanwhile the hazzard lights are working

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,531 Answers

Your turn signal flasher is separate from the hazard flasher. Replace the turn flasher.

Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.
The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAR SYMBOL ALARM LIGHT


If it's there is an diesel engine fitted, just remove the primary diesel filter with water trap and replace filter, on the petrol engine, that light indicates that you have a engine fault like oil, feul or sometimes the brake linings that needs attention

Jul 20, 2014 | 1998 Ford Explorer

1 Answer

Thew turning lights will not light up on my 1994 ford exploer bujt the arrows light up and blink when I put on my hazzard lights


could be fault in your indicator arm or you may have seperate relay for indicators.do your hazard lights work on the out side ?if so check the indicator arm switch.

Nov 14, 2013 | Cars & Trucks

1 Answer

2001 ford explorer sport blinkers dont work when you turn the hazzards on the right front only comes on and blinks fast


Most likely the problem is a burned out bulb in the right rear signal. If all bulbs in the right signal light are okay then you have a bad ground connection in that circuit.

Mar 16, 2010 | Ford Explorer Sport Cars & Trucks

1 Answer

Hazzard Lights on 1998 Ford Crown Victoria won't work


The hazards are on a seperate fuse to the indicators, on the inside of the fuse box cover it will tell you which fuse it is, simply replace it with one of the same rating and your hazards should work, if not come back to me

Mar 16, 2009 | 1998 Ford Crown Victoria

1 Answer

My cigaret lighter wont work on my 1998 ford explorer.


use a probe light and check if you have power to the centre connection at the bottom of the holder

Mar 15, 2009 | 1998 Ford Explorer

1 Answer

1998 Ford Ranger XLT turn signals, hazzard flasher not working


wire plugin on back of turnsignal switch not making a connecting

Jan 14, 2009 | 1998 Ford Ranger SuperCab

1 Answer

4wd not engaging no indicater lgt basicaly no 4wd


I had a prolem with my 1998 Ford Explorer XLT. The 4wd indicator light would randomly start to blink while moving and when I flipped the switch to 4wd hi or low it would engage but easily disengage and the indicator lights would not come on. I was hearing a grinding sound coming from my hubs so I replaced both front hub assemblies and the light stopped blinking and 4wd hi/low works great now. it was about 300 bucks for the hub assemblies and only took me an hour or two to change.

Nov 14, 2008 | 1991 Ford Explorer

Not finding what you are looking for?
1998 Ford Explorer Logo

1,081 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...