Question about 2001 Mazda Millenia

Open Question

I have 2001 mazda millenia S , i have acode p1250 which is prc solenoid valve....where is that valve located? thank u

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75066 Answers

SOURCE: Location under hood for fuel pump relay on 2002 Mazda Millenia S

JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..

Posted on Mar 11, 2009

  • 166 Answers

SOURCE: Check engine light/2001 Mazda Millenia

The check engine light comes on when there is a problem with your engine and throws a code which it then stores. That code can be "read" by an OBDI/OBDII scanner and should give you the info you need. If it was scanned and the codes "read" the check engine light should of been re-set. If your car is running well have your mechanic re-set it; if it comes on again take it and have it checked again. No system is fool proof and there may still be a problem. Hope this helps.

Posted on Aug 31, 2009

motor1258
  • 6674 Answers

SOURCE: install a new thermostat in 1998 mazda millenia

Check this link & scroll down to your engine.Click on pictures to expand.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528003989b

Posted on Jan 31, 2009

  • 750 Answers

SOURCE: my hold light is flashing in my 2001 mazda millenia

hold light flashing means you have a transmission fault of some kind, check vehicle speed sensor

Posted on Jul 03, 2009

  • 4 Answers

SOURCE: mazda mpv 2000

Possible problem is carbon build up in intake runners..remove top intake and clean runners..

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Three codes po171-p1250-po660


PO 171 System too lean, PO 1250 PRC Solenoid, PO 660 Secondary Shutter valve.

Sep 03, 2016 | Cars & Trucks

1 Answer

Have a BMW 2000 323I..replaced fuel pump ..Getting code P1250..any ideas ?


OBD code of: "P1250- PRC Solenoid Circuit Malfunction. Which malfunction of Fuel Pressure Regulator Control unit. PRC is located
by the fuel pump by the left side on the bottom rail under some plastic you will find it. PRC costs about $90.

Mar 15, 2015 | BMW Cars & Trucks

1 Answer

P1250 DTC on a 01 Mazda Protege


P1250 Mazda Fuel Pressure Regulator Control Solenoid

Since the code came back immediately this indicates that it is a hard fault. The solenoid is an electrical switch controlled by the ECM. In this case it controls vacuum provided to the fuel pressure regulator. On this vehicle locate the fuel injectors and the rail above them. At the end of the rail is the regulator which on it should have a vacuum hose. Check out the hose make sure there is not leaks or it is not coming apart. If it is okay the other end of it plugs into the solenoid. This is the failed component.

Nov 06, 2012 | Cars & Trucks

1 Answer

TROUBLE CODE P-1250 WHAT DOS IT MEANS


Hi there:This code is for the fuel pressure control solenoid, the solenoid could caus all the codes so I suggest checking it firts. To test..- Remove the PRC solenoid valve.- Check for air flow between ports of the solenoid valve.- If not as specified, replace the PRC solenoid valve.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Mar 05, 2012 | 2001 Mazda MPV

1 Answer

TROUBLE SHOOTNG CODES TABLE


Hi there:This code is for the fuel pressure control solenoid, the solenoid could caus all the codes so I suggest checking it firts. To test..- Remove the PRC solenoid valve.- Check for air flow between ports of the solenoid valve.- If not as specified, replace the PRC solenoid valve.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Mar 05, 2012 | Mazda MPV Cars & Trucks

1 Answer

2001 MPV MAZDA


Hi there:This code is for the fuel pressure control solenoid, the solenoid could caus all the codes so I suggest checking it firts. To test..- Remove the PRC solenoid valve.- Check for air flow between ports of the solenoid valve.- If not as specified, replace the PRC solenoid valve.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

Mar 05, 2012 | Cars & Trucks

2 Answers

P1250


The location of WHAT???

Diagnostic Test Code (DTC) P1250 is a manufacturer - specific code which has a general description of "Pressure Regulator Control (PRC) Solenoid Circuit Malfunction".

The PCM monitors input voltage at Pin number 44 when the ignition is turned on. DTC P1250 sets when less than .44 volts are present. The possible causes are:
> PRC Valve malfunction (open or shorted internally)
> Open or short circuit between the PRC valve and the PCM (control circuit)
> Open or short circuit in the solenoid ignition voltage supply circuit
> Failed PRC valve (stuck open)
> Malfunctioning PCM

Feb 17, 2012 | 2000 Mazda MPV

1 Answer

P1250


P1250- PRC Solenoid Circuit Malfunction, could be a problem with you fuel pressure regulator, i would check the pressure of the fuel rail with a fuel pressure gauge depending on what BMW you own fuel pressure spec it different.E39s are supposed to have 50 +/-2 psi of operating pressure

Jan 19, 2012 | BMW 323 Cars & Trucks

1 Answer

How do I check the fuel pressure on a 2000 model mazda millenia with a 2.3 engine in it


Hi.

You connect a fuel pressure gauge like this to the pressure rail. Pressure in this car must be between 35 and 45 psi. If pressure is too low look for kinked fuel lines and eventually replace the pump. If the pressure drops down more than 10 psi in five minutes or if the pressure is considerably higher than that replace the fuel pressure regulator. Below the parts that may need testing:

ginko_261.gif

1. Fuel tank
2. Shut-off valve
3. Non-return valve
4. Fuel pump
5. Fuel pump (Transfer)
6. Fuel filter (High-pressure)
7. Injector
8. Pressure regulator
9. PRC solenoid valve
10. Fuel pump relay
11. Fuel pump resistor and relay (KJ model)

Aug 04, 2011 | 2000 Mazda Millenia

1 Answer

THE STARTER WILL NOT ENGAGE ON MY 2001 MAZDA MELLENIA?


it is located on starter so you have to replace starter

Jan 10, 2010 | 2001 Mazda Millenia

Not finding what you are looking for?
2001 Mazda Millenia Logo

Related Topics:

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...