Question about 2002 Chevrolet Silverado

1 Answer

How difficult is it to change the front hub assembly for a 2002 chevy silverado 4x4 six lug with a 5.3 liter engine?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 69 Answers

Not hard if you have the right tools

Posted on Oct 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 chevy silverado abs light comes on goes off comes on goes off


Hi...your problem might be coming from your front wheel bearing hubs. They are know to cause this problem as they wear out and eventually have to be replaced.

http://www.autozone.com/autozone/parts/2006-Chevrolet-Silverado-3500-4WD/Wheel-Bearing-Hub-Assembly-Front/_/N-jnpe7Z8kns

If I helped...please rate me...thanks!

Sep 18, 2011 | 2006 Chevrolet Silverado

1 Answer

I HAVE A 99 CHEVY SILVERADO 1500 4X4 5.3L I WOULD LIKE TO CHANGE IT FROM 4X4 TO 2WD CAN I JUST CHANGE THE HUB ASSEMBLIES AND DISCONNECT THE DRIVE SHAFT & AXLES


Hello and welcome to FixYa!

Yes indeed. You can remove the drive shaft and axles and replace the hub assemblies to make it a 4x2.

Hope this helps and thank you for using FixYa! Have a good one!

Jun 01, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How to get front rotors off and r they nock offs or do i have to take a nut off? 2000 chevy silverado 2wd


mcdevito75 here, They should be knockoffs, That castle nut is holding the hub / Bearing assembly to the axle, and once removed that nut has to be replaced with a new one, so it"s not reasonable that nut has to come off to get the rotors off. Try, remove the tire and lift the caliper assembly off the rotor, use penetrating oil, liquid wrench, W D 40 around the lugs as they may be part of the rotor assembly, Then with a hammer tap moderately around the edge of the rotor to loosen it, keep the gear in Neautrel so you can turn the rotor while tapping with the hammer and use that penetrating oil around the lug studs and around the hub. The rotor should fit around the hub where that nut is and thru the lug studs that hold the tire on the axle.

Jun 17, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

I have a 2004 toyota 4x4 pick up, guy wants to sell me 4 chevrolet wheels, both are 6 lug, 16s---are they the same lug pattern--will they work???


often what happens is bolt pattern same like 6 lugs but the the bolts themselves are far apart from each otheri looked up 04 4x4 tocoma bolt pattern is 717x225mm). Big Hub. Bolt pattern: 6x139.7 (6x5.5). Offset: 2 to 22 mm.. it could work the rea test is to try one wheel and see if it fits do front one because of the 4x4 hub in front i would need to know what type chevy?

Feb 14, 2010 | 2004 Toyota Tacoma

2 Answers

Torque specs


the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

Apr 26, 2009 | Chevrolet Blazer Cars & Trucks

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

Instructions to replace sheared off lugs / studs - 1997 Chevy


You can remove old lug by driving it out with a decent sized hammer. To re-install, push new one into flange from backside and stack washers on wheel side, leaving enough room for the lug nut to go on. (backwards...flat side in) Tighten the nut, pulling the lug into the flange, till it is flush (like the unbroken ones) I suggest that you put some lube on lug threads to prevent binding while doing this.

Mar 16, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Remove the front disc rotor


The rotor and hub assembly are held together by the studs,you must first remove the 4-wheel drive hub assembly,then the wheel bearing nuts,and pull the hub and rotor off as a unit. Next lay it(back down) on a piece of wood, using a drift punch drive the studs out. Turn it over ,lay it(face down) on a block of wood, line the new stud splines up with the grooves in the hub and drive them in with the punch and reassemble. A set of dentist style picks will be helpful with the clip in the 4wd hub and a 4 lug 4wd nut wrench will be needed.

Dec 26, 2008 | 1979 Chevrolet C/K 3500

Not finding what you are looking for?
2002 Chevrolet Silverado Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...