Question about 2006 Pontiac G6

1 Answer

2007 G6 no start. turn key on nothing happens not even a click. pulling code U0141. BCM. How do I fix it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Pontiac Master
  • 8,215 Answers

Please see my tip at . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Oct 02, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

05 buick cen.Turn key and nothing nopower,panellights,radio.Nothing.Pull key out and open door chime comes on,put in and it goes off

Gremlins ! No ! You want to know how this is possible ? The ignition switch is a low voltage input to the BCM - body control module ! Going by which position you have the key in ACCY , ON , run or start . The BCM system will control relays to turn on power to different parts of the vehicle ! The place to start would be to hook up a professional type scan tool that can communicate with the BCM . Could have U codes stored in one or more of the modules on the vehicle ! Do you know what a power mode master PPM is , BCM !
BCM Functions
The body control module (BCM) performs multiple body control functions. The BCM can control devices directly connected to its outputs based on input information. The BCM evaluates this information and controls certain body control systems by commanding outputs on or off. The BCM control inputs can be:
• Sensors and switches that are directly connected to the BCM
• Class 2 serial data received from other vehicle systems connected to the class 2 serial data link.
The BCM is also capable of controlling other vehicle systems that are not directly wired to the BCM. The BCM does this by sending specific messages on the class 2 serial data link. The system capable of performing the required function will respond to the BCM message.

Your best bet would be to take your vehicle to a Buick dealer !
Power Mode Master
This vehicles BCM fuctions as the Power Mode Master (PMM). Refer to Power Mode Description and Operation for a complete description of power mode functions.

Dec 16, 2016 | 2005 Buick Century

1 Answer

How do i remove bcm in 2007 pontiac g6?

Why ? If you replace the BCM it will need to be programmed . Dealer !!
This vehicle's body control module (BCM) has a bussed electrical center integrated into the housing. Body control relays and fuses are installed directly on the BCM, which simplifies wiring and junction blocks on the vehicle. The body control system consists of the BCM and its associated controls. Battery positive voltage is provided to the BCM from IBCM BATT 1 fuse and the IBCM BATT 2 fuse in the underhood fuse block. The module grounds are wired to ground G201, G203 and G305. The BCM is wired to the GMLAN High speed serial data buss, and the GMLAN Low speed serial data buss, as well as discrete input and output terminals to control the functions of the vehicle's body .
Trying to save you some agravation an wasted time an money . For a do it yourselfer , this is nothing you should be messing with ! You don't have the training to be messing with the BCM .
A new body control module (BCM) must be programmed with the proper regular production option (RPO) configurations. The BCM stores the information regarding the vehicle options and if the BCM is not properly configured with the correct RPO codes the BCM will not control all of the features properly. The Tech 2 software will automatically prompt you with the various RPOs available for the vehicle. Ensure that the following conditions exist in order to prepare for BCM programming:
This entire procedure has been reviewed before starting
The battery is fully charged.
A CANdi module is installed between the vehicle and the scan tool.
The ignition switch is in the ON position.
The data link connector (DLC) is accessible.
All disconnected modules and devices are reconnected before programming.

Oct 23, 2016 | 2007 Pontiac G6

1 Answer

I took my 2007 Aspen to autozone because engine light was on. The following codes came up: U11OE, U11OC, U1120, U0141, U1403 what is wrong?

Check above link for possible information relating to your issues. Also bear in mind that sometimes the codes thrown up are phantoms, symptoms of a failing sensor.


Jun 15, 2015 | 2007 Chrysler Aspen

2 Answers

What do these codes me u110c u0141 u1403 u110E mean on a Chrysler 200 2011


Pull the negative off of your battery for 10 minutes and allow the cars CPU to reboot.

Feb 02, 2015 | 2011 Chrysler 200

1 Answer

2007 Chrysler Aspen

is this a jeep or and aspen. confusing post for sure.

like all 1996 and newer cars in usa;.
do a pcm reset,
drive see if they clear. (see if they self clear) if not , they are REAL.

how to do that , there are 3 ways
  • pull battery , neg lug. (radio codes lost. nav lost, trans relearn happens... shift hard till it learns...
  • better pull pcm memory fuse. (PCM OID FUSE)
  • best, push the reset button on the scan too. rent a tool?
1103 means service light on, so is useless in view of others.

ever search first.
here is ASE guys. pros. 1st hit btw.

or look in your FSM book first. see those words telling what each mean? if sounds like greek, then get car fixed?

Jul 08, 2014 | Jeep Compass Cars & Trucks

1 Answer

2002 monte carlo wont start turn key and it wont click or motor turn at all

have the starter tested. if it comes back good . check for relays ,and if that is good .it is a bcm

Dec 11, 2012 | Cars & Trucks

1 Answer

2007 g6 v6, new tires and alignment didn't help. Pulls abruptly during acceleration, shifting, and while on cruise control .

Why Because you failed to explain what you wanted to be
resolved & most likely went to the wrong shop,They took your
money bur never even diagnosed anything you told them,happens!

What about motor mounts,transaxle mounts,cv axles,worn suspension
parts? Was all that checked?

Was the car road tested with you driving & then switch &
mechanic driving

Don't do that--- no fix--- they don't care

Nov 29, 2012 | 2007 Pontiac G6

1 Answer

Dodge nitro engine code u110c, u1403,u0141,u110e

what do these code mean u110c,u0141,u1403,u110e for dodge nitro 07

Nov 12, 2011 | Cars & Trucks

1 Answer

2007 tahoe that has been wrecked and wont start

Yes the control modules all store the vehicle VIN # in them to protect aginst theft.

Sep 02, 2009 | 2007 Chevrolet Tahoe

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides