Question about 1994 Pontiac Grand Prix

2 Answers

Securty light is on wont start - 1994 Pontiac Grand Prix

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Good Evening, I am sorry to hear your car is not starting for you. Go ahead and try to start it then when it does not start leave the key in the on position until the security light goes off can take anywhere from 5-12 minutes. Once it goes off start it right up, that should recode the system, usually it is a problem in the ignition switch not making contact properly with the resistor pellet. Hope this helps.

Posted on Oct 02, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

No good you will have to take to dealer to remap securty or sometimes turn key forward accessories only wait for light to turn off few up to fifteen minutes

Posted on Oct 02, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a 1993 Toyota Celica gt think securty system is locked now no spark to distributer.

you may have to use a code reader to reset the CPU program as flat batteries can corrupt the program and cause starting problems.

Feb 26, 2014 | 1993 Toyota Celica

1 Answer

Securty problem truck wont start 2001 gmc searra died out driving

You have a fualty electrical condition,This can stem from a broken insulation wire to poor connection or the insulation that has rub through.The problem you have plaque GM. No need to by pass just get to the ignition area inspect the harness if anything you have a bad connection

Mar 12, 2012 | GMC Cars & Trucks

2 Answers

95 chevy lumina cranks but wont start, no spark, replaced the crank senser, no luck

Are there any lights on the dash when this happens? When you put key in and try to crank it over, does the securty light come on?

Apr 10, 2011 | 1995 Chevrolet Lumina

1 Answer

Securty light came on and now the car will not

Open and shut the doors,and the trunk,and the hood,lock all doors,and set the anti-theft,leave it 5 minutes,then disarm it,and try and start,if this does not work,re-learn the key to the ignition,turn the key to on,leave it ten minutes,then turn it off,and right back on,do this three times,a total of thirty minutes,this should do it.

Jun 30, 2010 | 2003 Pontiac Grand Am

1 Answer

Key locked in car wont start, cant remove key securty lock light is on

I think your battery is dead. Check and confirm that the battery is at 12.6 volts. If it is below 10volts then put the battery on a charger or replace it.
Batteries are good for about 5years. Let me know if you need more help.
Find out why your battery went dead. Well if that is what happened.

May 21, 2010 | 2003 Cadillac CTS

1 Answer

Wont start until securty lite goes off and check engine lite comes on

the car is telling you that it is trying to recognise the key still,hence the slight delay in you being able to start car...

Apr 02, 2010 | 1993 Jeep Grand Cherokee

1 Answer

Car will crank over but will not start

leave a battery charger on the car place keo key on engine off for roughly 10mins or until light goes out if light doesn't go off after30mins you need to repair securty problem first ie. pass lock sensor faild replace it first if you don't have proper diag equipment. if light goes out after 30mins start engine. you can also try disconnecting battery for 30mins and then hold pos and neg cables together with the battery still disconnected for 1sec to reset pcm /bcm. then relearn securty. good luck

Mar 23, 2009 | 1997 Pontiac Grand Am

2 Answers

Car won't start

turn the key to the on position until the securty light on dash go out takes bout 10 min to reset or u can disconnect the batt 30 sec

Mar 16, 2009 | 2001 Oldsmobile Alero

1 Answer

Replaced battery securty light came on power no start

Here is something that the emission wiz helped me with

1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your key

Mar 14, 2009 | 1997 Chevrolet Venture

Not finding what you are looking for?
1994 Pontiac Grand Prix Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides