Question about 2000 Volvo S70

1 Answer

My engine light is on, the brake light comes on and the speedometer stops when that happens, my key is stuck in the ignition, and the blinking arrow won't stop blinking. I am a first time volvo owner. I am beggining to think that their should be a mandatory class for this type of automobile. All said, I do love the car. Please help me.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Brake light comes on auto each time you start the car (saftey check) and will go off when you press brake pedal.

Blinking arrow will stop when you click seat belt together (driver)

turn ign off press key in towards drive stem and turn anti clock (5degs)and pull out

Put in key hold in mileage reset button and turn key to on (dont start the car )the last click before starting (and keep finger on miles reset button till flashing stops
then turn off ,this resets all service lights,
tc

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2011 Honda CRV brake, ABS, Seat Belt,& Anti skid feature lights blinking on the dash. The speedometer,tach, dash item info are not working. Engine check showed the battery and alternator are fine.


you will need to plug the car with a diagnostic computer.

Can you check your brake light. See either they are stuck on or not working at all.
If that fault is there. then all other lights will come on too.
Change the brake switch...

Sep 04, 2017 | Honda Cars & Trucks

1 Answer

I have a1993 chevy sportvan ,the abs light wont shut off ,the speedometer wont work and it wont shift out of first gear?


I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
Best Manuals

Oct 25, 2016 | Chevrolet Cars & Trucks

1 Answer

Brake light come on when mashed and blinking. And then key would not come out of ignition


Brake Hydraulic System Red Warning Light - RepairPal

repairpal.com/brake-hydraulic-system-red-warning-light
If the red brake light blinks, or comes on and off intermittently, and there is no change in the feel of the brake pedal, then have the vehicle properly diagnosed by ...

Ignition Key Stuck Due to Failed Shifter : Buick Skylark ...

repairpal.com > Problems > Buick > Skylark
Key Stuck in Ignition Lock Cylinder on Buick Skylark ... wires on brake look good same with wires on shifter,key is froozen moves but not out of locking ... when key is turned all lights come on and accessories work but engine does not turn over ...

Sep 30, 2015 | Cars & Trucks

1 Answer

I have a 2007 ES 350. Changed key fob battery,now nothing works. Only immobilizer security light is flashing and engine start stop button has amber colored light on


Be sure to use the correct battery, properly in place, clean the key contacts , See owner's manual for additional information.
There are specialized locksmiths for car keys

Oct 02, 2014 | 2007 Lexus ES 350

2 Answers

Astrostart won't start the car


You may need to reset the system.

SEQUENCE ACTIVATED BY THE PARKING BRAKE .
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply the parking brake Once Twice
Note: The system can be set - at time of installation - to require that the parking brake be applied once or twice.
If set for two actuations, pause one second between the two.
4. Remove key from ignition (the system keeps the engine running).
5. Exit the vehicle.
6. Within 60 seconds, close all doors.
7. The system will stop the engine and blink the parking brakes once to confirm the sequence is valid (vehicle is
ready for a remote start command).
SEQUENCE ACTIVATED BY THE REMOTE CONTROL
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply parking brake.
4. Send the start command (Model 801 & 2101 - Model 903 ).
5. Remove key from ignition (the system keeps the engine running).
6. Exit the vehicle.
7. Using the remote, send the STOP command. The system will stop the engine and parking lights will blink once
to confirm that the sequence is valid (vehicle is ready for a remote start command).
http://www.astrostart.com/Support/Guides.aspx

Nov 27, 2012 | Cars & Trucks

1 Answer

1998 jeep cherokee


Sounds like it could be a problem with the ignition switch. Does the vehicle stall or keep running? Do the lights go out or do the stay on until you cycle the key? Have you tried Turing the key a little back and forth when this happens to see if the problem goes away?

Sep 03, 2012 | 2005 Jeep Grand Cherokee

1 Answer

Electrical problems


Same thing is happening right now on a 2002 Monte Carlo. When the key is simply turned to ON, all of the lights on the dash starts blinking rapidly. When I attempt to turn the car over, there is no CLICK or anything from the engine - nada. Ignition turns and the dash goes dark, as if it wants to TRY to start - but nothing happens.
But, when I press the brake pedal (and the key is just sitting in the ON position), all of the blinking lights stops flashing and just stay lit. Therefore, I changed the brake switch, thinking it might make a huge difference. Didn't really help at all. When the key is turned, you can hear the fuel pump engage and everything seems to be ready to go. But, the car won't start (it will only start when it feels like it)...hit and miss, pretty much.
Does anyone know the TRUE solution to this issue? Does the ignition need to be replaced in order to get this car to crank over

May 05, 2012 | 2000 Chevrolet Monte Carlo

1 Answer

Uncle put new brake pads on vehicle (he worked on front and back brakes) and now the speedometer doesn't work, the abs light is on, check engine light, and the break light is on. what could have happened ....


Check for disconnected ABS sensors. The front sensors in the front are located next to the axle shafts. The rear sensor is located on the rear differential housing itself on top, in the middle. The ABS is monitored by the computer for performance. The ABS kicks on when the vehicle comes from a certain speed to a dead stop, keeping the wheels from locking up. That could be the reason for the speedometer not working. Or it could be a bad speed sensor. Both can also trigger the check engine light because it is monitored by the computer. The brake light usually comes on due to low fluid level. It can trigger the light, but not be low enough to impact brake performance. I hope this helps.

Oct 16, 2010 | 2000 Dodge Durango

Not finding what you are looking for?
2000 Volvo S70 Logo

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...