Question about 2001 Mercury Mountaineer

3 Answers

Entry code om drivers door

Just purchased a used 2001 mercury mountaineer. no manual or handbook in car. how do i find the entry code for the drivers door?

Posted by on

  • Anonymous Mar 12, 2014

    I have brought mercury mountaineer truck need to know how get reset door code on driver side

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 119 Answers

The keyless entry module is located in the rear of the vehicle on the driver's side. You will need to partially remove the left rear panel in the cargo area. You will then see the keyless entry module bolted behind a metal reinforcement bar. There is a sticker on the module that has the 5 digit entry code.

Posted on May 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can go to a Ford Dealership and they can retrieve the door codes for you by your vin number on your vehicle..We just bought a Mercury Mountaineer 2005 and did not have the code and this is how we got ours..

Posted on Jul 08, 2012

  • Erik Arredondo
    Erik Arredondo Oct 29, 2014

    how much did they charge to retrive the door code

×

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Go to www.customersaskford.com - type in the text box - keyless entry - then press the "ask" button

Posted on Dec 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to find the keyless entry code on a 2008 Mercury Mountaineer


Not in the vehicle

It may be avail from the dealers parts dept,
if you give them your VIN #

It came with the vehicle when new,the factory code
that is,was on a white plastic card on some fords,then
you can change it ,if you have the owners manual

Apr 02, 2014 | 2008 Mercury Mountaineer

2 Answers

Where do I find the keyless entry code for my 1999 Mercury Mountaineer? Then when I use the remote to unlock or lock the Mountaineer, the locks will pop up or the horn will blow or all four locks will...


TRY THIS REPROGRAMMING PROCEDURE. SWITCH THE IGNITION OFF TO ON 8 TIMES WITHIN 10 SECONDS. DOORS SHOULD LOCK THEN UNLOCK. PRESS ANY BUTTON ON THE FIRST REMOTE TRANSMITTER. DOORS SHOULD LOCK THEN UNLOCK. IF YOU HAVE ANOTHER CAR REMOTE REPROGRAM IT THE SAME WAY. WHEN DONE SWITCH IGNITION SWITCH OFF.

Jan 27, 2011 | 1999 Mercury Mountaineer

1 Answer

Just purchased a 2003 mountaineer from a used car dealer and they don't have the manual and the alarm doesn't work. How do I get the factory entry code?


the keyless entry code is on the module and in the module memory. A dealer can extract the code ( about $50). You can access the owner manual on line at motorcraft.com, pro center, tech info, owner manual. I have one for $7 plus postage. let me know. Also, look for a plastic credit card in teh glove box with the code on it. The module should be under the dash, driver side I think.


Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  1. Press 1/2 within five seconds of Step 1.
  1. Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
  1. Enter factory set five-digit code.
  1. Press 1/2 within five seconds of Step 1.
  1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system now responds only to the factory set code.
Anti-Scan Feature
To provide added security, the keyless entry pad is disabled for one minute after 35 button presses without a valid entry code being entered. The keypad flashes during this one-minute mode with all functionality disabled except for 7/8 and 9/0 still being allowed to lock the vehicle.
Anti-Scan will be turned off after one minute of keypad inactivity.
Unlocking the Doors and Liftgate with the Keyless Entry Keypad System
To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will illuminate.
To unlock all doors, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 control within five seconds.
To open the liftgate window glass, enter the factory set code or the personal code (driver door unlocks) and press the 5/6 control within five seconds.
Locking the Doors with the Keyless Entry Keypad System
It is not necessary to enter the factory set or personal code prior to locking all doors. To lock all doors, press the 7/8 and 9/0 controls at the same time

Dec 21, 2010 | 2003 Mercury Mountaineer

1 Answer

How do you reset the code on the keyless entry


Hi,


It seems you have problems in locating the original code to gain entry into your mercury car,however,you will find it on the back of the door lock module,in the right trunk area or below the rear passenger window.

However,If you still desire to reset the code,the only solution to this problem is that the computer will have to be reflashed by a qualified technician.


Take care..

Aug 21, 2010 | 2001 Mercury Mountaineer

1 Answer

How do I find the factory personal entry code on a 2004 Mercury Mountaineer?


look where the jack is mounted in the back driver side with a flashlight inside straigh up into the hole after removing the access panel in the rear of the vehicle, lifting the hatch door.

Dec 27, 2009 | 2004 Mercury Mountaineer

1 Answer

Where can i find the keycode to the drivers door entry on my mercury mountaineer 1997.. (the car does not have an owners manual, so i cant look it up) i just bought the car.


look for a plastic "credit card" in your owner manual packet. It has the code on it. The dealer can retrieve with his scanner too but it will cost @ $40 to hook it up. I think dealer can call Ford for you too. WIll need registration and ID and go in person. Call dealer first to confirm.

Sep 18, 2009 | 1997 Mercury Mountaineer

1 Answer

Goodmorning! I had purchased a 2000 mercury


spray a small amount of W/D 4o into the key lock and then put the key in and move it back and forward until the lock free up and also spray a small amount in the inside lock of the door as well and then do the same on the other side the reason you had this problem is because the last owner only used the remotes to lock and unlock the doors and not the key sometimes.

Mar 18, 2009 | 2000 Mercury Mountaineer

1 Answer

Code for keyless entry on door?


THE CODE IS A PAPER TAG ON THE KEYLESS ENTRY MODULE, THIS MODULE IS LOCATED BEHIND THE LARGE TRIM PANEL ON THE DRIVER SIDE OF THE CARGO AREA. THERE IS NO GENERIC CODE. MY BACKGROUND IS: 10 YEAR FORD FACTORY CERTIFIED ELECTRONICS MASTER TECHNICIAN.

Jan 07, 2009 | 2003 Mercury Mountaineer

2 Answers

Keyless door pads


Go to www.customersaskford.com - type in the text box - keyless entry - then press the "ask" button

Jun 21, 2008 | 2002 Mercury Mountaineer

Not finding what you are looking for?
2001 Mercury Mountaineer Logo

1,007 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...