Question about 2003 Ford Taurus

Open Question

Speed senser wire color code connecting taxi

Speed senser wire color code connecting taxi meter.need speed senser color code to connect meter for milage

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: speedometer working some now on

check the Transmission Fluid I do Believe that the Sensor For the Speedo is in the Transmission

Posted on Jan 04, 2009

emissionwiz
  • 75051 Answers

SOURCE: What wires do i connect for my cd player? What colors connect?

here are the factory wire colors and what they do.

1999 Ford Escort
Radio Stereo Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Blue/Red
Car Radio Accessory Switched 12v+ Wire: Blue/Black
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Red/Black
Car Stereo Dimmer Wire: Green
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: White/Orange
Car Stereo Amplifier Location: Under the driver seat.
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Violet
Left Front Speaker Negative Wire (-): Blue/Orange
Right Front Speaker Positive Wire (+): Blue/White
Right Front Speaker Negative Wire (-): White
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): White/Blue
Left Rear Speaker Negative Wire (-): Red/Blue
Right Rear Speaker Positive Wire (+): White/Green
Right Rear Speaker Negative Wire (-): Blue
-->

Posted on Mar 04, 2009

  • 290 Answers

SOURCE: installing aftermarket radio need color code for explorer wiring

http://www.the12volt.com/installbay/stereodetail/858.html

Posted on Mar 29, 2009

  • 1 Answer

SOURCE: wiring diagram for vss

Try American Taximeters & Communications Inc. 21-46 44th St. L.I.C. NY 11101. We just bought a 7800-0572 converter from them, it plugs into the OBDII plug under the dash, it was for a 2006 Ford 500. Good Luck. $150 plus shipping.

Posted on Aug 28, 2009

longbow243
  • 103 Answers

SOURCE: 2000 Silverado-4.3 ltre-cranks over-wont start-consistenly

Yes. First, in the fuse block under the hood check INJ A fuse and INJ B fuse. INJ A fuse is circuit 1039 which feeds the coil. If the fuse is OK, replace the coil electrical connector. I stock 2 of these at my dealership because they are needed quite often.
FYI P1351 is an ignition coil control circuit DTC.

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the vss wire located on a 2006 prius


violet wire on 26 pin connector to the multi display

Oct 06, 2014 | 2006 Toyota Prius

1 Answer

Wiring pulsar meter 2010 in 2005 chevy uplander


what color is the speed secor wire and where is it located

Sep 01, 2012 | Cars & Trucks

2 Answers

Code poo31 showing and what would be the possible cause and what part to be replaced?


P0031 Oxagen senser heater circuit. The heater circuit can be checked with a test light connected to ground. ( a tast light is an ice pick looking tool with a clear handle with a 12 volt bulb inside and a ware with a clip to connect to grond, the light will light as the tip is touched to anything powered up with 12 volts and sometimes a little more and a wholde lot less) Find the oxagen sensers ( thier screwed into the exhaust pipes) Disconnect the electrial connectors and connect the test light to ground, with the key on test the wires in the plug connect ed the vehical. one of them should light the light, if it does reconect it and test the rest of the sensers, recalling which wire was live. ( most are white or grey but they vary some. If all the sensers have power it's not the power but the senser failed. with an ohm meter test the senser for the wire that was hot to the other wire that is the same color if the sneser is open ( no circuit ) you have found the bad senser. If you can't find power going to any of the sensers. Check the fuse boxes for blown fuses ( check them all with a test light) If you find a blown fuse replace it but go back to the wiring tjat connects to the sensers and you'll find someplace where the wire melted to the exhaust pipes and shorted out, blowing the fuse. The sensers short out too but not very often.

Feb 03, 2011 | 1999 Mazda MX-5 Miata

1 Answer

I am looking for the speed signal output wire for a 2005 kia sedona.I am trying to hooh up a taxi meter.Can you help


Do not hook anything to a vehicles electrical system
You will load the circuit and have all kinds of issues.

The Speed Sensor is an output sensor that sends a signal to the
vehicles computer, for shift control stratagy. The output
will also be unusable for what you want to do.

Follow the taxi meters instructions

Jan 30, 2011 | 2004 Kia Sedona

1 Answer

I need to hook up a centrodyne taxi meter to 2000 dodge caravan. I need to know how to hook it up. thanks


It's very easy on the pcm you will find a blue/orange wire. That's you hook up wire(vss). There are two set of wires off the meter bracket one comes with three wires and the other one with two. The one with 3 one goes to battery(red) ground(black) and top light(green or white). The other set of wires only the white one is connected to the vss.(vehicle speed sensor)

Sep 29, 2010 | 2000 Dodge Caravan

1 Answer

I have 1993 dodge dakota 3.9l v-6 with trouble codes 12,15 and 55 what do they mean


the trouble codes are as follows code 12 problem with battery connection. direct battery input tp pcm disconnected within the last 50 ignition key-on cycles. code 15 a problem with the vehicle distance/speed signal. no distance/speed sensor signal detected during road load conditions. code 55 completion of fault code display on check engine light. this is an end of message code. the speed sensor is located on the transmission/transfer case extension housing. check plug connection to speed sensor for power using an volt meter. connect the positive side of volt meter to the orange wire terminal and the negative side of volt meter to the black/light blue terminal. the voltage should be approximately 8.0 volts and to check the voltage from the pcm connect the positive end of volt meter to the white/orange wire terminal and the negative side ti the black/light blue wire terminal. signal voltage should be 5.0 volts. if there is no signal voltage signal, have the pcm checked out. if you have both signals from the terminals then remove the vehicle speed sensor and check the speedometer pinion for worn or missing teeth.

Apr 07, 2010 | 1993 Dodge Dakota

1 Answer

Running poorly and will not idle 1998 ford explorer 6 cyl


it was a PO 1505 code idles speed control wiring problom broken wire in the wire harnes running great

Nov 18, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
2003 Ford Taurus Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...