Question about 1989 Saab 9000

Open Question

How to remove the alternator from a 1989 saab 9000

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 23 Answers

SOURCE: 9000 dimmer switch removal

Take a small flat head tech screw driver or a small plastic wedge and be very careful. You have to work it out. Look at the new one to see how it secures itself.

Posted on Dec 20, 2008

Ad
swoop611
  • 488 Answers

SOURCE: how do i polarize alternator after new regulator saab9000 1989?

You dont. Alternators DO NOT require polarisation as they can only be fitted to vehicles that are wired as NEGATIVE EARTH. If you have replaced the Alt, reconnect the wiring, reconnect the battery - Positive lead first then the negative lead, then start the motor !! Using multimeter, check the charge rate at the battery. It should be around 13.8 volts. The charge rate SHOULD NOT go above 14.7 volts and if it does, turn the motor off immediately and recheck the connections, especially any battery voltage sensing wires. if nothing appears to be wrong, contact an auto electrician and have them check things out. I have known faulty regulators, even in new Alternators..

Posted on Dec 27, 2009

  • 1 Answer

SOURCE: Directions on how to remove the alternator on 1989

yes it came out by using this method

Posted on May 06, 2010

alicantecoli
  • 22156 Answers

SOURCE: my 1989 9000 saab manual

most likely the linkage under the bonnet but you would need to have a good look as i suspect a idler stay bar has come away on top of the gearbox ,you will just have to have a good look

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace an alternator on a 1992 sabb 9000


Saab 9-3 or 9-5 alternator replace
type what is above into your browser it will show you a video of how to replace your alternator

Feb 04, 2014 | 1992 Saab 9000

1 Answer

Unti lock on all time. sensors cleaned.


Maybe the anti lock brake ecu is bad or the sensors need to be replaced on the appropriate wheel as indicated by fault codes for the ABS system.

Fault codes were not provided on the original 1989 model of the Saab 9000, but the 1990 to 1991 model ecu can be installed and fault codes read from the AntiLock warning lIght flashing codes.

Check wiring to ensure there are no opens to the module from the ABS Wheel Speed Sensors.

Maybe check that the wheel speed sensor is picking up a sinusoidal wave of AC electricity when the wheel is spun as seen on an oscilloscope function of a multimeter. This would isolate the problem to wiring or the ECU being at fault.

Oct 29, 2010 | 1989 Saab 9000

1 Answer

How do i polarize alternator after new regulator saab9000 1989?


You dont. Alternators DO NOT require polarisation as they can only be fitted to vehicles that are wired as NEGATIVE EARTH. If you have replaced the Alt, reconnect the wiring, reconnect the battery - Positive lead first then the negative lead, then start the motor !! Using multimeter, check the charge rate at the battery. It should be around 13.8 volts. The charge rate SHOULD NOT go above 14.7 volts and if it does, turn the motor off immediately and recheck the connections, especially any battery voltage sensing wires. if nothing appears to be wrong, contact an auto electrician and have them check things out. I have known faulty regulators, even in new Alternators..

Dec 27, 2009 | 1989 Saab 9000

1 Answer

My 1988 Saab 9000 Turbo needs hydraulic fluid for the clutch. Where is the place where I put the hyrdralic fluid located???


the clutch is fed by the brake's .. its actuallly jsut break fluid.. if your low on clutch fluid it means you must have a leak check the master it self for leaks.

Sep 28, 2009 | 1989 Saab 9000

2 Answers

Directions on how to remove the alternator on 1989 900 Saab. Does anything have to be removed to be able to get the alternator off. Also, any tricks to get belts off first?


Removing the alternator isn't the easiest job on this car!

The long bolt that allows the alternator to pivot to adjust belt tension ISN'T the bolt to be removed; remove the two bolts that hold the mounting bracket to the engine block. One is at the end of the alternator (away from the belt), the other is above the end of the adjusting bolt, not far away from the first bolt. Slacken the tension off the belt by loosening the adjusting bolt, then undo the two bolts holding the bracket to the engine block.

While you have the alternator off, check the bushings of the tension adjusting bolt; if worn/sloppy they should be pressed out and replaced; it'll extend the life of the alternator bearings.

Good luck!

Saabreur

Jul 09, 2009 | 1989 Saab 900 4 Door

1 Answer

How to undo the alternator on saab 900s1996


You first undo upper adjuster, remove completely, then you must undo the 3 allen bolts on the alt mount to engine block, of course after disconnecting battery. There is not room to remove lower pivot bolt.

Jun 15, 2009 | 1996 Saab 9000

1 Answer

Need a passenger 88 900 headlight can only find 88 9000 headlight


Generally, these parts are car specific and rarely interchangeable, body parts especially; however check on the Saab Depot website as they do show what parts will fit alternate vehicles : http://www.saabdepot.com/

Hope this helps, if it does, please give it a "thumbs up"!

Thanks

Saabreur

May 09, 2009 | 1988 Saab 900

1 Answer

Gas door locked: SAAB 1989 9000


in the boot behid the tool tray on the right side ther is a cable with a yellow platic thing hanging pull this and your flap will unlock

Apr 19, 2009 | 1989 Saab 9000

1 Answer

1989 saab 9000 driver's door jammed


the metal rod came off the inside. You need to come in from top with a slim jim to open and then work on the door by taking panel off. Get a locksmith or call the local dealer and ask who is there SAAB roadside assistance. Also Cadillac dealers have a roadside service.

Feb 04, 2009 | 1989 Saab 9000

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...